{"title":"Semiconductor","description":null,"products":[{"product_id":"p2-edge-module","title":"P2 Edge Module","description":"\u003ch5\u003e\u003cstrong\u003eP2 Edge Module Rev D Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe P2 Edge Module is a simple way to get started with the \u003ca href=\"\/products\/propeller-2-p2x8c4m64p-multicore-microcontroller-chip\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 multicore microcontroller\u003c\/a\u003e. In addition to speeding development, this module provides an optimal P2 building block for system integrators and designers to include in their products.\u003c\/p\u003e\n\u003cp\u003eThe Propeller 2 P2X8C4M64P chip contains over 32 million transistors and \u0026gt;70 mm2 of custom silicon, 10x that of a typical microcontroller. The P2 contains 8 independent processors with analog pad rings and Smart-pin functionality at all 64 I\/O pins.  Each smart I\/O pin is capable of many autonomous analog and digital functions, including ADC, DAC, PWM, USB, SERIAL, Waveform generation, SMPS, Comparator, SCHMITT and LOGIC modes.\u003c\/p\u003e\n\u003cp\u003eThe P2 Edge Module includes the exposed-pad 100-pin TQFP P2X8C4M64P, core and I\/O power regulators, power filtering capacitors, crystal, flash memory, boot configuration switches, and two user-configurable on-board LEDs to indicate system states.  The PCB's six-layer design features solid thermal and signal reference planes isolating each signal layer.  The design is optimized for low-noise analog and digital operation, and with low temperature rise even at high-speed operation.\u003c\/p\u003e\n\u003cp\u003eNew features for Rev D include increasing PCB from four layers to 6 layers, and onboard switching power supplies' maximum output current increasing from 2 A to 3 A, with switching frequency changing from 2.5 MHz to 750 kHz. See the product guide under Downloads for details.\u003c\/p\u003e\n\u003cp\u003eFor development, the P2 Edge Module fits in the card edge socket of the spacious \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard\u003c\/a\u003e, the compact \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board\u003c\/a\u003e, or the bare-bones \u003ca href=\"\/products\/p2-edge-80-pin-adapter-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge 80-pin Adapter Kit\u003c\/a\u003e.  For product integration,  several edge socket choices are available from our \u003ca href=\"\/collections\/components-ics\" rel=\"noopener\" target=\"_blank\"\u003eP2 Components shop page\u003c\/a\u003e. This arrangement allows developers to integrate the Propeller 2 into products without the need for multi-layer cost or expertise.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e page and our \u003ca href=\"\/pages\/programming-tools\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Programming Tools\u003c\/a\u003e Comparison Chart for more resources; you may also s\u003cspan class=\"rotforte\"\u003eign up for our \u003ca href=\"\/pages\/customer-success\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Newsletter here.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eP2 Edge Module Rev D Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompact module with Propeller 2 Multicore Microcontroller and essential circuits\u003c\/li\u003e\n\u003cli\u003eSix-layer*, low noise, system-on-board module\u003c\/li\u003e\n\u003cli\u003eIntegrated thermal planes for low temperature rise characteristics at high speed operation\u003c\/li\u003e\n\u003cli\u003eOrientation \/ module locking hole\u003c\/li\u003e\n\u003cli\u003eTwo mounting holes connected to the module ground planes\u003c\/li\u003e\n\u003cli\u003eAdjustable operating frequency; recommended maximum 180 MHz clock\u003c\/li\u003e\n\u003cli\u003eOverclocking possible beyond 300 MHz\u003c\/li\u003e\n\u003cli\u003e16 MB SPI Flash memory and microSD card socket for flexible memory management\u003c\/li\u003e\n\u003cli\u003e64 Smart I\/O pins brought out to the edge connector\u003c\/li\u003e\n\u003cli\u003eBuffered LEDs on I\/O pins P56 and P57, visible from both sides of the module PCB\u003c\/li\u003e\n\u003cli\u003eOnboard LED feature enable\/disable switch\u003c\/li\u003e\n\u003cli\u003eOnboard 1.8 V 3-Amp* switching regulator with short-circuit, over-current fault and brownout detection protection for the P2 core (VDD)\u003c\/li\u003e\n\u003cli\u003eOnboard 3.8 V, 3-amp* switching regulator with short-circuit and over-current fault protection to supply the low-noise IO regulators for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eOnboard low-noise LDO 3.3 V regulators for the P2 smart-pins (VIO), with short-circuit and over-current fault protection\u003c\/li\u003e\n\u003cli\u003eDual power inputs via the Edge Connector or optional header pads on the back of the module, with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eCompatible with the Parallax Prop Plug (#32201) for system programming\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e although the P2-EC edge connector may resemble the BBC micro:bit, it is not designed to be a replacement or compatible product.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic and CNC control where simultaneous processing is needed\u003c\/li\u003e\n\u003cli\u003eSensing applications where multiple analog inputs are measured at high speed\u003c\/li\u003e\n\u003cli\u003eVideo display control for user human user interface\u003c\/li\u003e\n\u003cli\u003eEducational tool for parallel processing and coding in different languages (Python, C, BASIC, Spin2\/PASM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eP2 Edge Module Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage input requirements: 5 to 16 VDC (Rev C \u0026amp; D only)\u003c\/li\u003e\n\u003cli\u003eInput current requirements: 100 mA min, 500-1000 mA typical, maximum according to customer application*\u003c\/li\u003e\n\u003cli\u003eVoltage input protection: reverse voltage\u003c\/li\u003e\n\u003cli\u003ePropeller 2 chip: P2X8C4M64P (8 cogs, 512 KB hub RAM, 64 smart pins)\u003c\/li\u003e\n\u003cli\u003eNon-volatile Memory: 16 MB (128 Mb) SPI Flash\u003c\/li\u003e\n\u003cli\u003eOscillator: TCXO 20 MHz +\/-0.5 PPM\u003c\/li\u003e\n\u003cli\u003eSmart I\/O pins: 64 accessible, 56 fully free, grouped in 8 sets of 8 I\/Os\u003c\/li\u003e\n\u003cli\u003eSmart I\/O pin logic voltage: 3.3 V\u003c\/li\u003e\n\u003cli\u003eInternal VDD Power Supply: 1.8 V up to 3 A *, 750 kHz* nominal switching frequency\u003c\/li\u003e\n\u003cli\u003eVIO Power Supplies: 3.3V up to 300 mA per 8 I\/O pins\u003c\/li\u003e\n\u003cli\u003eEdge Connector: Double sided 80-way 0.05” (1.27 mm) pitch edge slot\u003c\/li\u003e\n\u003cli\u003eProgramming: Serial up to 2 MBaud\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 1.45 x 2.04 in (37 x 52 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Updated for Rev D modules.\u003c\/p\u003e\n\u003cp\u003eProduct guide, schematics, and RoHS CE \u0026amp; UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/programming-tools\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Programming Tools (IDEs)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224194357,"sku":"P2-EC","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/bd20da98-P2-ECRevDC.jpg?v=1787781829"},{"product_id":"p2-edge-module-with-32mb-ram","title":"P2 Edge Module with 32MB RAM","description":"\u003ch5\u003eP2 Edge Module with 32MB RAM Overview\u003c\/h5\u003e\n\u003cp\u003eThe P2 Edge Module with 32MB RAM is a simple way to get started with the Propeller 2 multicore microcontroller. In addition to speeding development, this module provides an optimal P2 building block for system integrators and designers to include in their products.\u003c\/p\u003e\n\u003cp\u003eThe\u003ca href=\"\/products\/propeller-2-p2x8c4m64p-multicore-microcontroller-chip\/\" rel=\"noopener\" target=\"_blank\"\u003e Propeller 2 P2X8C4M64P\u003c\/a\u003e is an 8-core 32 bit CPU with 32-bit timers, 64-bit CORDIC math solver, and custom analog pad rings with Smart-pin functionality at all 64 I\/O pins. Each Smart I\/O pin is capable of many autonomous analog and digital functions, including ADC, DAC, PWM, USB, SERIAL, Waveform generation, SMPS, Comparator, SCHMITT and LOGIC modes.\u003c\/p\u003e\n\u003cp\u003eThe P2 Edge Module with 32MB RAM includes the 100-pin TQFP P2X8C4M64P, core and I\/O power regulators, power filtering capacitors, crystal, flash memory, boot configuration switches, microSD card socket, and two user-configurable on-board LEDs to indicate system states. This version of the Edge module adds 32MB of RAM to the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eoriginal P2-EC\u003c\/a\u003e, and has 46 free I\/O’s available at the edge connector. The PCB's multi-layer design features solid thermal and signal reference planes isolating each signal layer. The design is optimized for low-noise analog and digital operation, and with low temperature rise even at high-speed operation.\u003c\/p\u003e\n\u003cp\u003eFor development, the P2 Edge Module fits in the card edge socket of the spacious \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard\u003c\/a\u003e, the compact \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board\u003c\/a\u003e, or the bare-bones \u003ca href=\"\/products\/p2-edge-80-pin-adapter-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge 80-pin Adapter Kit\u003c\/a\u003e.  For product integration,  several edge socket choices are available from our \u003ca href=\"\/collections\/propeller-2?page=1\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Components shop page\u003c\/a\u003e. This arrangement allows developers to integrate the Propeller 2 into products without the need for multi-layer cost or expertise.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e page and our \u003ca href=\"\/pages\/programming-tools\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Programming Tools\u003c\/a\u003e Comparison Chart for more resources; you may also s\u003cspan class=\"rotforte\"\u003eign up for our \u003ca href=\"\/pages\/customer-success\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Newsletter here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompact module with Propeller 2 P2X8C4M64P multicore microcontroller\u003c\/li\u003e\n\u003cli\u003e6-layer* low noise, system-on-board module\u003c\/li\u003e\n\u003cli\u003eIntegrated thermal plane for low temperature rise characteristics at high speed operation\u003c\/li\u003e\n\u003cli\u003eDouble-sided 80 way 0.05 inch (1.27 mm) edge connector\u003c\/li\u003e\n\u003cli\u003eOrientation \/ module locking hole\u003c\/li\u003e\n\u003cli\u003eTwo mounting holes connected to the module ground planes\u003c\/li\u003e\n\u003cli\u003eHigh-precision 20 MHz TCXO oscillator (+\/-0.5 PPM)\u003c\/li\u003e\n\u003cli\u003eAdjustable operating frequency; recommended maximum 180 MHz clock\u003c\/li\u003e\n\u003cli\u003eOverclocking possible beyond 300 MHz; see the \u003ca href=\"\/pages\/propeller-live-forum\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 forum\u003c\/a\u003e for discussion\u003c\/li\u003e\n\u003cli\u003e16 MB SPI Flash memory and microSD card socket for flexible memory management\u003c\/li\u003e\n\u003cli\u003e32 MB 16-bit PSRAM arranged as 4x 4-bit blocks, and accessible up to 1x 16-bit with typical burst speeds of 308 MB\/s\u003c\/li\u003e\n\u003cli\u003e46 Smart I\/O pins brought out to the edge connector and 18 Smart I\/O pins dedicated to the on-board RAM\u003c\/li\u003e\n\u003cli\u003eBuffered LEDs on I\/O pins P38 and P39, visible from both sides of the module PCB\u003c\/li\u003e\n\u003cli\u003eOnboard LED feature enable\/disable switch\u003c\/li\u003e\n\u003cli\u003eOnboard 1.8 V 3-amp* switching regulator with short-circuit, over-current fault and brownout protection for the P2 core (VDD)\u003cbr\u003eOnboard 3.8, V 3-amp* switching regulator with short-circuit and over-current fault protection to supply the low-noise IO regulators for maximum efficiency*\u003c\/li\u003e\n\u003cli\u003eOnboard low-noise LDO 3.3 V regulators for the P2 smart-pins (VIO), with short-circuit and over-current fault protection\u003c\/li\u003e\n\u003cli\u003eWide 5-16 VDC power supply input range with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003ca href=\"\/products\/prop-plug-rev-e\/\" rel=\"noopener\" target=\"_blank\"\u003eProp Plug\u003c\/a\u003e\u003ca href=\"\/products\/prop-plug\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e for system programming\u003c\/li\u003e\n\u003cli\u003ePCBs assembled, tested, and completed in Rocklin, California.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Updated for Rev B modules.\u003c\/p\u003e\n\u003ch5\u003eP2 Edge Module with 32MB RAM Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage input requirements: 5-16 VDC\u003c\/li\u003e\n\u003cli\u003eInput current requirements: 100 mA recommended min, 500-1000 mA typical\u003c\/li\u003e\n\u003cli\u003eVoltage input protection: reverse voltage\u003c\/li\u003e\n\u003cli\u003ePropeller 2 chip: P2X8C4M64P (8 cogs, 512 KB shared hub RAM, 64 smart pins)\u003c\/li\u003e\n\u003cli\u003eNon-volatile memory: 16 MB (128 Mb) SPI Flash\u003c\/li\u003e\n\u003cli\u003eVolatile memory: 32 MB (256 Mb) PSRAM\u003c\/li\u003e\n\u003cli\u003eOscillator: TCXO 20 MHz +\/-0.5PPM\u003c\/li\u003e\n\u003cli\u003eSmart I\/O pins: 46 accessible, 40 fully free, grouped in 8 sets of 8 I\/Os\u003c\/li\u003e\n\u003cli\u003eSmart I\/O pin logic voltage: 3.3 V\u003c\/li\u003e\n\u003cli\u003eInternal VDD Power Supply: 1.8 V up to 3 A*, 750 kHz* nominal switching frequency\u003c\/li\u003e\n\u003cli\u003eVIO power supplies: low noise LDO 3.3V up to 300 mA per 8 I\/O pins\u003c\/li\u003e\n\u003cli\u003eEdge connector: double sided 80 way 0.05” (1.27 mm) pitch edge slot\u003c\/li\u003e\n\u003cli\u003eProgramming: serial up to 2 Mbaud\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB dimensions: 1.45 in x 2.04 in (37mm x 51.7mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Updated for Rev B modules\u003c\/p\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/programming-tools\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Programming Tools (IDEs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/propeller-live-forum\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePropeller 2 Events\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225636149,"sku":"P2-EC32MB","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/c8892c80-P2-EC32MBRevBb.jpg?v=1787781837"},{"product_id":"universal-motor-driver-p2-add-on-board","title":"Universal Motor Driver P2 Add-on Board","description":"\u003ch5\u003eUniversal Motor Driver P2 Add-on Board Overview:\u003c\/h5\u003e\n\u003cp\u003eThe Universal Motor Driver P2 Add-on Board was designed as an accessory for the Parallax Propeller 2 eight-core microcontroller. It is compatible with standard P2 dual-port accessory headers found on the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e, and \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis 4-phase motor driver add-on supports experimentation and development with many motor types, including brushed and brushless motors. For example, it could support a single brushless 3-phase BDLC motor, a 4-phase stepper motor, or two standard brushed (2-wire) DC motors. \u003c\/p\u003e\n\u003cp\u003eFor example, it could support a single brushless 3-phase Hub Brushless DC (BDLC) motor, a 4-phase stepper motor, two brushed bi-directional DC motors or four brushed uni-directional DC motors. With a 3-phase motor, both sinusoidal 180° and classic 120° drive techniques are supported.\u003c\/p\u003e\n\u003cp\u003eThe open design and standard 0.1” connectors allow the Universal Motor Driver P2 Add-on Board to be used with other microcontrollers as well.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal 4-phase motor driver using four UCC27211D MOSFET drivers\u003c\/li\u003e\n\u003cli\u003ePhases can be controlled individually or in groups to support many motor types including single or 3-phase motors, single\/dual DC motors or 4-phase stepper motors\u003c\/li\u003e\n\u003cli\u003eSinusoidal 180° or classic 120° drive topology\u003c\/li\u003e\n\u003cli\u003eEach phase allows individual control of High and Low sides\u003c\/li\u003e\n\u003cli\u003eHigh and Low sides protected against simultaneous activation\u003c\/li\u003e\n\u003cli\u003eOn-board Hall effect sensor connector for motor control feedback\u003c\/li\u003e\n\u003cli\u003eCommon current feedback signal for motor control and over-current protection\u003c\/li\u003e\n\u003cli\u003eIndependent voltage feedback signals for each phase, for motor control and over-voltage protection\u003c\/li\u003e\n\u003cli\u003eUnder-voltage protection built into the MOSFET drivers\u003c\/li\u003e\n\u003cli\u003eHigh-current spring terminal connectors for quick and robust connections to high-current motors\u003c\/li\u003e\n\u003cli\u003eTwo grounded 0.125 inch (3.2 mm) mounting holes\u003c\/li\u003e\n\u003cli\u003ePCBs assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eUniversal Motor Driver P2 Add-on Board Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage range: 6–40 VDC\u003c\/li\u003e\n\u003cli\u003eMaximum continuous supply current: 20A\u003c\/li\u003e\n\u003cli\u003eMaximum surge motor current: 60A\u003c\/li\u003e\n\u003cli\u003eP2 board connector: dual 2x6 pass-thru headers with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003ePower and motor cable connection method: Push-in spring connection, nominal 2.5 mm²\u003c\/li\u003e\n\u003cli\u003eCommunication Interface: 3.3V TTL, PWM\u003c\/li\u003e\n\u003cli\u003eVIN and Output Channel Spring Terminal Blocks: 32 A 400 V rated\n\u003cul\u003e\n\u003cli\u003eConductor cross section solid : 0.2 mm² – 4 mm²\u003c\/li\u003e\n\u003cli\u003eConductor cross section AWG : 24–12\u003c\/li\u003e\n\u003cli\u003eStripping length : 10 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB dimensions: 2.75 x 2.75 in (70 x 70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forums.parallax.com\/discussion\/169367\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Live Forum: Brushless Motor Control with Stephen and Ken – August 16th 2023\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225701685,"sku":"64010","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e0711964-64010B-top.jpg?v=1787781837"},{"product_id":"p2-hd-audio-add-on-set","title":"P2 HD Audio Add-on Set","description":"\u003ch5\u003eP2 HD Audio Add-on Set Overview\u003c\/h5\u003e\n\u003cp\u003eThe P2 HD Audio Add-on Set is a specialized ADC and DAC combination personally designed by Chip Gracey to extend the high quality audio capabilities of the Propeller 2 Smart Pins into the real world.  For over 30 years, Chip has created audio examples with microcontrollers as part of his personal audiophile interests. He chose high-quality components for these boards, which are assembled and tested at Parallax headquarters in Rocklin, California, to support his own projects. This P2 HD Audio Add-on Set will enhance your projects as well.\u003c\/p\u003e\n\u003cp\u003eThis hardware demonstrates the Propeller 2’s abilities with a precision DAC\/ADC in two code examples. The first example streams audio from the ADC inputs, optionally applies digital effects, and then plays the audio back out through the DAC output at line level or directly to headphones. The second code example shows how to drive the DAC output directly with sound frequencies generated by the Propeller 2. These sound effects could be useful for audio feedback of different states of control and debugging, robotic sensing, public announcement or alerts.\u003c\/p\u003e\n\u003cp\u003eThis add-on set is supplied as a kit including both the ADC and DAC boards. High-quality  Each board is compatible with any standard single Parallax P2 accessory socket found on most P2 development boards, and are designed to fit side-by-side if installed at a dual port. The connector is a standard 2x6-way 0.1” pitch socket, and the boards could be used with a wide range of microcontrollers that use 3.3 V signal levels.\u003c\/p\u003e\n\u003cp\u003eThe ADC has 4 input channels available via two stereo 3.5mm jack sockets, or at two sets of unpopulated 0.1” pitch 3-way header pads.  The DAC has 2 output channels available via one stereo 3.5mm jack socket, or unpopulated 0.1” pitch 3-way header pads.  The jack sockets can be used in mono or stereo modes, to allow the left and right channels to carry independent signals, or to be part of a stereo pair.\u003c\/p\u003e\n\u003cp\u003eThe P2 HD Audio Add-on Set extends the high quality audio capabilities of the Parallax P2 multicore microcontroller Smart Pins into the real world, and enables advanced sound capabilities, processing and effects commonly used in robotics, interactive displays, conferencing, stadium, studio and industrial applications.\u003c\/p\u003e\n\u003ch5\u003eP2 HD Audio ADC Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBased on the AK5704EN 32-bit 4ch ADC with MIC pre-amplifier\u003c\/li\u003e\n\u003cli\u003eHigh performance analog front-end A \/ D converter IC ideal for voice recognition, voice control, and conferencing applications\u003c\/li\u003e\n\u003cli\u003eSuperior low-noise recording with low power consumption\u003c\/li\u003e\n\u003cli\u003eVAD (voice activity detection) feature further reduces system power consumption\u003c\/li\u003e\n\u003cli\u003eSupports ultrasonic recording\u003c\/li\u003e\n\u003cli\u003eSampling frequency from 8 k to 192 kHz\u003c\/li\u003e\n\u003cli\u003eMIC input jack configurable for line level input signals, for up to 4 channels of line input\u003c\/li\u003e\n\u003cli\u003eMIC input channels have configurable voltage pull-up for use with analog microphones\u003c\/li\u003e\n\u003cli\u003e2x6 female socket with 0.1” spacing compatible with the standard Parallax P2 Accessory sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 HD Audio ADC Specifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: +3.3 VDC\u003c\/li\u003e\n\u003cli\u003eControl interface: I2C bus (400 kHz)\u003c\/li\u003e\n\u003cli\u003eMax bits: 32 bit\u003c\/li\u003e\n\u003cli\u003eMax fs: 192 kHz (typical 48 kHz)\u003c\/li\u003e\n\u003cli\u003eMax S\/N: 105 dB\u003c\/li\u003e\n\u003cli\u003eMIC amplifier gain: +30 dB to 0 dB, 3 dB step\u003c\/li\u003e\n\u003cli\u003eForm factor: dual 2x6-pin female pass-through headers with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003eMounting hole: 3.2 mm diameter\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 1.6 x 1 in (40.64 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eRoHS CE \u0026amp; UKCA Declarations of Conformity are available under the Downloads tab\u003c\/li\u003e\n\u003cli\u003ePCBs assembled, tested, and completed in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 HD Audio DAC Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to leverage the Parallax P2 multicore microcontroller Smart Pin DAC modes\u003c\/li\u003e\n\u003cli\u003eConfigurable with a range of drive strengths, from 18 to 990 ohms\u003c\/li\u003e\n\u003cli\u003eHigh performance output ideal for announcements, music and general sound monitoring and reproduction\u003c\/li\u003e\n\u003cli\u003eSuperior low-noise output with low power consumption\u003c\/li\u003e\n\u003cli\u003e2x6 female socket with 0.1” spacing compatible with the standard Parallax P2 Accessory sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 HD Audio DAC Specifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: +3.3 VDC\u003c\/li\u003e\n\u003cli\u003eVpp output: 2 V or 3 V configurable\u003c\/li\u003e\n\u003cli\u003eDrive impedance: 18.75 ohms to 990 ohms, configurable in 16 steps\u003c\/li\u003e\n\u003cli\u003eForm factor: dual 2x6-pin female pass-through headers with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003eMounting hole: 3.2 mm diameter\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB dimensions: 1.6 x 1 in (40.64 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eRoHS CE \u0026amp; UKCA Declarations of Conformity are available under the Downloads tab\u003c\/li\u003e\n\u003cli\u003ePCBs assembled, tested, and completed in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the P2 HD Audio Add-on Set Product Guide under Downloads for complete pin connections and board dimensions.\u003c\/p\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.akm.com\/eu\/en\/products\/audio\/audio-adc\/ak5704en\/\" rel=\"noopener\" target=\"_blank\"\u003eADC (AK5704EN) Manufacturer Datasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226520885,"sku":"64014","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a6053994-64014RevApair.jpg?v=1787781841"},{"product_id":"p2-edge-breakout-board","title":"P2 Edge Breakout Board","description":"\u003ch5\u003eP2 Edge Breakout Board Overview\u003c\/h5\u003e\n\u003cp\u003eThe P2 Edge Breakout Board provides a compact interface to the P2 Edge Module for experimenting and developing with the \u003ca href=\"\/pages\/propeller-2-multicore-microcontroller\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 multicore microcontroller\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe board accepts the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e and includes a supply voltage DC Jack socket, power headers, reset button, and programming header for the \u003ca href=\"\/products\/prop-plug-rev-e\/\" rel=\"noopener\" target=\"_blank\"\u003eParallax Prop Plug (#32201)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAll 64 of the P2 Edge Smart I\/O pins are available at eight 0.1” pin header sockets, compatible with both single and dual header Propeller 2 accessories. All accessory headers are arranged to accept single or dual P2 accessory boards. The last header includes the programming and memory pins (58-63) and reset signal (RES) for wireless programming when using the P2 WX Adapter (#64007) with Parallax WX ESP8266 SIP module (#32420S).\u003c\/p\u003e\n\u003cp\u003eThis P2 Edge Breakout Board provides access to every I\/O pin available on the #P2-EC module.  There is also a \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e for customers that don’t require all the I\/O pins, or are working with the #P2-EC32MB Edge Module.\u003c\/p\u003e\n\u003ch5\u003eP2 Edge Breakout Board Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVertical socket for the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolder-free prototyping with header sockets for power, programming and I\/O\u003c\/li\u003e\n\u003cli\u003eCenter-positive 2.1 mm barrel jack for external 5 VDC power supply\u003c\/li\u003e\n\u003cli\u003eFlexible 0.1” 2x3 way power header allows use of an external switch or power supply\u003c\/li\u003e\n\u003cli\u003eConvenient reset button\u003c\/li\u003e\n\u003cli\u003eDedicated \u003ca href=\"\/products\/prop-plug-rev-e\/\" rel=\"noopener\" target=\"_blank\"\u003eParallax Prop Plug (#32201)\u003c\/a\u003e header, for system programming and debugging\u003c\/li\u003e\n\u003cli\u003eAll 64 Smart I\/O pins brought out to 0.1” 2x6-way P2 accessory headers\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003ca href=\"\/products\/p2-to-mikrobus-click-adapter\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 to MikroBUS Click Adapter\u003c\/a\u003e and \u003ca href=\"\/collections\/propeller-click-boards\/\" rel=\"noopener\" target=\"_blank\"\u003eClick Boards \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 Edge Breakout Board Specifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage input: 5 VDC, absolute maximum 5.5 VDC\u003c\/li\u003e\n\u003cli\u003eInput Current: Recommended minimum 100 mA\u003c\/li\u003e\n\u003cli\u003eVIO Power Supplies: 3.3 V up to 300 mA per 8 I\/O pins; requires P2 Edge Module\u003c\/li\u003e\n\u003cli\u003eSmart I\/O pins: 3.3 V logic level, source or sink 30 mA per I\/O pin\u003c\/li\u003e\n\u003cli\u003eUSB programming: Serial up to 2 MBaud; requires Prop Plug (#32201) programming adapter\u003c\/li\u003e\n\u003cli\u003eWireless programming: (up to 2 MBaud); requires P2 WX WiFi Adapter (#64007) and WX WiFi SIP module (#32420S)\u003c\/li\u003e\n\u003cli\u003eMounting holes: Four 3.2mm diameter plated mounted holes connected to GND\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 4 x 1.4 in (101.6 x 35.6 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Product Guide  and the RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCB assembled, tested, and completed in the USA\u003c\/p\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/programming-tools\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Programming Tools (IDEs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226389813,"sku":"64029","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/b7b89b99-64029-model-white.jpg?v=1787781841"},{"product_id":"flip-protoboard-kit","title":"FLiP ProtoBoard Kit","description":"\u003ch5\u003eFLiP ProtoBoard Kit Overview\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHave a project that needs a permanent platform? \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eLook no further- the FLiP ProtoBoard is your board!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eParallax’s new FLiP ProtoBoard is the ideal choice for building dedicated circuits with your own multicore \u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 FLiP module (not included)\u003c\/a\u003e and makes it easy to interface the microcontroller with the real world. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe FLiP ProtoBoard has a large prototyping area and has spaces for screw terminals, header pins and sockets, WiFi, P2 accessories, Qwiic accessories, Click modules, Servo headers, LEDs, power switches, LDO power regulation, and more!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe FLiP ProtoBoard reduces the project cost of using the Propeller 1, as your own Propeller FLiP Module can be moved from project to project. And for system builders, the FLiP ProtoBoard provides a robust reliable solution, rapid prototyping and quick path to market for designs based on our multicore Propeller microcontroller. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFLiP ProtoBoard Kit Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePropeller FLiP module socket area on the top side of the PCB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUser circuits can be built on either side of the PCB, with labels duplicated on both sides\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVersatile protoboard arrangement, clearly marked with access to every Propeller IO pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower input via screw terminal, 0.1” header or 2.1 mm center-positive DC barrel jack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCB has rounded corners and gold plated pads\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGrounded corner mounting holes, 3.2mm diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUp to 8x screw terminals accept 26AWG...16AWG wire, and can be easily connected to IOs and\/or power rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVertical Qwiic socket footprint supporting a range of third-party I2C accessories\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports up to two MIKROE Click module footprints, one on the front, one on the back\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWiFi ready – 10-way socket compatible with the Parallax WiFi SIP module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports two single P2 style accessories, with space reserved for one dual P2 accessory\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLDO footprint and space for bypass capacitors allows for additional voltages (VAUX)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTwo 0.1” pitch LED footprints, easily connected to power or IO signals\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDedicated footprint for standard 6mm x 6mm tactile Reset button\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eArea for six standard 3-way servo style headers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eArea for four standard 3 or 4-way accessory headers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower path header footprint allows easy connection for on\/off switches or shunt jumpers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower and ground rails available at multiple locations around the prototyping area\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCB dimensions and mounting holes compatible with the Parallax small robot chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTop-edge IOs have silk blocks for user labeling with a permanent marker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBottom of PCB has larger silk area for user labeling; such as name or version identity\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFLiP ProtoBoard Kit Contents:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 1K\u003c\/li\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 3.9K\u003c\/li\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 10K\u003c\/li\u003e\n\u003cli\u003e(1) - Capacitor Ceramic \u003cspan style=\"font-weight: 400;\"\u003e1uF\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - Capacitor Electrolytic 10uF\u003c\/li\u003e\n\u003cli\u003e(1) - LED T1-3\/4 Red\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eLED T1-3\/4 Green\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eSwitch 6x6mm Tactile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003ePin Socket 2.54mm (0.1”) 1x10\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) - \u003cspan style=\"font-weight: 400;\"\u003ePin Socket 2.54mm (0.1”) 1x20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) - \u003cspan style=\"font-weight: 400;\"\u003ePin Header 2.54mm (0.1”) 1x20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) - \u003cspan style=\"font-weight: 400;\"\u003eShunt Jumper 2.54mm (0.1”) 2-pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eConnector 2.1mm DC Barrel Jack Socket\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eConnector Qwiic Vertical\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) - \u003cspan style=\"font-weight: 400;\"\u003eConnector 3.81mm (0.15”) Screw Terminal 2-pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eRegulator LDO 5V 1.5A (LD29150DT50R)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eFLiP ProtoBoard Bare PCB\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe FLiP ProtoBoard package includes the bare prototyping board with user-solderable headers, screw terminals, and commonly used components as listed above. Soldering required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe \u003c\/span\u003e\u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePropeller 1 FLiP Module\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e is NOT included, and must be purchased separately - refer to the list of “getting started” parts below, which are recommended for new customers, and can be shared by multiple FLiP ProtoBoards when building multiple projects:\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eRecommended parts that are not included in the FLiP ProtoBoard kit:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eFLiP Module (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#32123\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eWiFi SIP Module (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#32420S\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eUSB A to Micro B Cable (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#805-00016\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e7.5 VDC 1.6 Amp Power Supply (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#750-00009\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eAssorted 3-Wire Extension Cable 30-Pack (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#751-00010\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eP2 Accessory modules compatible with the FLiP module and FLiP ProtoBoard kit:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eUniversal Motor Driver P2 Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64010\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 RTC Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64013\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval Control Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006A\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval LED Matrix Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006C\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 microSD Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64009\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval Mini Prototyping Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006E\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eP2-ES Eval Protoboard Add-on (#64005-ES)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forums.parallax.com\/\" rel=\"noopener\" target=\"_blank\"\u003eParallax Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/obex.parallax.com\/obex\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller OBEX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226946869,"sku":"32120","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/775d29fa-32120-parts-1.jpg?v=1787781841"}],"url":"https:\/\/shop.parallax.com\/collections\/semiconductor.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}