{"title":"Propeller 1","description":null,"products":[{"product_id":"propeller-1-chip-40-pin-dip-chip","title":"Propeller 1 Chip - 40-Pin DIP Chip","description":"\u003ch5\u003eP8X32A-D40 Overview:\u003c\/h5\u003e\n\u003cp\u003eThe Propeller 1 chip is a multicore microcontroller that is programmable in high-level languages (Spin and C) as well as a low-level (Propeller assembly) language.  Application development is simplified by using the set of pre-built objects for video (NTSC\/PAL\/VGA), mice, keyboards, LCDs, stepper motors and sensors.\u003c\/p\u003e\n\u003cp\u003eThe Propeller is designed with an emphasis on general-purpose use, with powerful capabilities that are great for customized high-speed embedded processing, while maintaining low power, low current consumption and a small physical footprint.  The Propeller's processors are all identical, each with its own separate memory, and each with an identical interface to all 32 I\/O pins and internal shared memory.  The architecture is built for swift processing of asynchronous events, equal access to internal and external resources, and dynamic speed and power when it's needed.\u003c\/p\u003e\n\u003cp\u003eThe P8X32A-D40 is most useful for prototyping in breadboarded or socketed circuits. The Propeller is easily connected to your computer's serial or USB port for programming using our Prop Plug. The Propeller chip can run on its own with a 3.3-volt power supply, internal clock, and with its internal RAM for code storage. Add an external EEPROM for non-volatile code storage and an external clock source for accurate timing.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMulticore processing simplifies designs subject to asynchronous requirements\u003c\/li\u003e\n\u003cli\u003eDIP package for easy prototyping with a breadboard\u003c\/li\u003e\n\u003cli\u003eBuilt-in Spin language is easy to learn\u003c\/li\u003e\n\u003cli\u003ePropGCC support provides a familiar feel for C\/C++ programmers\u003c\/li\u003e\n\u003cli\u003ePropeller Assembly language supports deterministic timing using single-path, multi-decision techniques\u003c\/li\u003e\n\u003cli\u003eInternal or external clock sources provide flexible speed options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\" style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e \u003c\/strong\u003e9 Tested Chips in a Rail. \u003c\/p\u003e\n\u003cp class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: 2.7 to 3.3 VDC\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial for programming\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.48 x 2.0 x 0.13 in (12.3 x 51 x 3.41 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -67 to +257 °F (-55 to +125 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eP8X32A-D40 Pin Assignments:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eP0-P31: General purpose I\/O.  Can source\/sink 40 mA each at 3.3 VDC\u003c\/li\u003e\n\u003cli\u003eP31: Rx from host (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eP30: Tx to host (general purpose I\/O after boot up\/download)\u003c\/li\u003e\n\u003cli\u003eP29: I2C SDA connection to external EEPROM (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eP28: I2C SCL connection to external EEPROM (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eVdd: Power (3.3 VDC)\u003c\/li\u003e\n\u003cli\u003eVss: Ground (0 VDC)\u003c\/li\u003e\n\u003cli\u003eBOEn: Brown Out Enable (active low). Must be connected to either Vdd or Vss.  If low, RESn becomes a weak output (~5 KΩ) for monitoring purposes but can be driven low to cause reset. If high, RESn is a CMOS input with Schmitt Trigger.\u003c\/li\u003e\n\u003cli\u003eRESn: Reset (active low). When low, resets the Propeller chip; all cogs disabled and I\/O pins floating. Propeller restarts 50 ms after RESn transitions from low to high.\u003c\/li\u003e\n\u003cli\u003eXI: Crystal \/ clock input. Can connect to crystal or oscillator\u003c\/li\u003e\n\u003cli\u003eXO: Crystal Output. Provides feedback for an external crystal. Internal C and R selectable for crystals (no other components required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eLong-term supply notification:\u003c\/span\u003e\u003c\/strong\u003e The Propeller chip is a full-custom, Parallax design in entirety, unencumbered from any third-party intellectual property obligations. Parallax endeavors to supply Propellers as long as we have demand (i.e., foreseeable future, a minimum 20 to 25 years).\u003c\/p\u003e\n\u003cp\u003eAs an example of our commitment, Parallax still manufactures the BASIC Stamp I and it was designed over 20 years ago. For these reasons, customers should have no concern about the long-term supply of Propeller chips. If you have any concern about long-term supply please feel free to contact us for personal communication.\u003c\/p\u003e\n\u003ch4\u003eAdditional resources\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p1\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 Community Libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213511989,"sku":"P8X32A-D40","price":11.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/82149020-P8X32A-D40.png?v=1787781806"},{"product_id":"propeller-activity-board-wx","title":"Propeller Activity Board WX","description":"\u003ch5 role=\"tab\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eDue to supply chain disruptions, this product was discontinued.\u003c\/span\u003e You can order the \u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" rel=\"noopener\" target=\"_blank\"\u003eFLiP module\u003c\/a\u003e and the \u003ca href=\"\/products\/flip-protoboard-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eFLiP ProtoBoard Kit\u003c\/a\u003e instead.\u003c\/h5\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003ePropeller Activity Board WX Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Propeller Activity Board WX features the 8-core Propeller 1 microcontroller pre-wired to a host of popular peripherals for fast and fun experiments.  Designed especially for STEM education, it's a great tool for learning or teaching technology basics: electronics, programming, sensors, communication, computer science, engineering, and control systems.\u003c\/p\u003e\n\u003cp\u003eProgramming is well-supported with our \u003cstrong\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/series\/propeller-blocklyprop-basics-and-projects\" rel=\"noopener noreferrer\" target=\"_blank\"\u003evisual BlocklyProp tutorials\u003c\/a\u003e \u003c\/strong\u003eor \u003cstrong\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/series\/propeller-c-basics-and-projects\" rel=\"noopener noreferrer\" target=\"_blank\"\u003etext-based C-language tutorials\u003c\/a\u003e\u003c\/strong\u003e. It's also the board included on the ActivityBot 360° Robot. The Propeller 1 microcontroller on this board makes complex projects easier to manage.  Timing-sensitive processes like controlling motors, checking sensors, or playing audio can be handled by separate cores without interfering with each other.  Our pre-written C libraries and our BlocklyProp blocks hand this aspect automatically - just call them from your main program and the cores will be launched and released behind the scenes as needed.\u003c\/p\u003e\n\u003cp\u003eThe WX version of the Propeller Activity Board expands upon the functionality of the original (#32910).  There’s more current for your projects with independent 1.8 amp 3.3 V and 5 V switching regulators, an upgrade from audio-out-only to a Mini TRRS audio\/video (or audio\/mic) jack, and selectable wireless socket\/USB communication between host computer and the Propeller chip (RF module not included!)\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlocklyProp graphical programming on Chromebook, Windows, or Mac\u003c\/li\u003e\n\u003cli\u003eText-based C programming on Windows or Mac\u003c\/li\u003e\n\u003cli\u003e8-core Propeller microcontroller \u0026amp; 64 KB EEPROM\u003c\/li\u003e\n\u003cli\u003eRF module socket with WiFi support — experiment with wireless communication and debugging\u003c\/li\u003e\n\u003cli\u003emicroSD card holder — log sensor data or play WAV files\u003c\/li\u003e\n\u003cli\u003eMini TRRS audio\/video jack — listen to WAV files, synthesized speech, or output Propeller-generated video\u003c\/li\u003e\n\u003cli\u003e3-pin headers — quickly connect servos, sensors, serial LCDs, etc.\u003c\/li\u003e\n\u003cli\u003eBreadboard — build and rebuild circuits without soldering\u003c\/li\u003e\n\u003cli\u003eA\/D and D\/A converters — read or set the voltages for battery monitoring or sensors\u003c\/li\u003e\n\u003cli\u003eIndependent switching regulators —  3.3 V, 1.8 A and 5 V, 1.8 A\u003c\/li\u003e\n\u003cli\u003ePower via USB or power supply\/battery pack — the choice is yours\u003c\/li\u003e\n\u003cli\u003eA bag of 10 3\" jumper wires and four protective rubber feet are included\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: our \u003cstrong\u003e\u003ca href=\"\/products\/7-5-vdc-1-6-amp-power-supply\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e7.5 VDC, 1 Amp Power Supply\u003c\/a\u003e\u003c\/strong\u003e is recommended, not included.\u003c\/p\u003e\n\u003cp\u003eThis product replaces the original Propeller Activity Board (#32910).\u003c\/p\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePropeller Activity Board WX Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: 6 to 15 VDC from an external power supply, or 5 V from a USB port\u003c\/li\u003e\n\u003cli\u003eCommunication: USB mini-B (onboard serial over USB) or wireless (RF module not included)\u003c\/li\u003e\n\u003cli\u003eDimensions: 4.0 x 3.05 x 0.625 in (10.16 x 7.75 x 1.59 cm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003e8-core Propeller P8X32A-Q44 microcontroller\u003c\/li\u003e\n\u003cli\u003e1.8A, 3.3V\/5V switching regulators\u003c\/li\u003e\n\u003cli\u003e18 Propeller I\/O available for prototyping\u003c\/li\u003e\n\u003cli\u003e64 KB I2C EEPROM\u003c\/li\u003e\n\u003cli\u003e5 MHz crystal oscillator\u003c\/li\u003e\n\u003cli\u003emicroSD card slot\u003c\/li\u003e\n\u003cli\u003eMini TRRS audio\/video jack\u003c\/li\u003e\n\u003cli\u003eWireless module socket with DO, DI, RTS, CTS access\u003c\/li\u003e\n\u003cli\u003eBreadboard with 34 5-socket rows\u003c\/li\u003e\n\u003cli\u003e3-pin servo ports, jumper-select 5 V or VIN\u003c\/li\u003e\n\u003cli\u003e12-bit 4-channel SPI ADC with 5 V reference\u003c\/li\u003e\n\u003cli\u003e2-channel D\/A, 0–3.3 V\u003c\/li\u003e\n\u003cli\u003e3-position power switch\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003e2.1 mm centar-positive power jack\u003c\/li\u003e\n\u003cli\u003eAuto-selects between USB or external power\u003c\/li\u003e\n\u003cli\u003eBuilt-in USB over-current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A shunt jumper connects two pins next to each set of servo port 3-pin headers. This jumper selects the servo port voltage (5V or VIN) and the port will not receive power without this jumper. If replacements for this part are needed, \u003ca href=\"\/pages\/contact-us\/\" target=\"_blank\" rel=\"noopener\"\u003econtact our sales department\u003c\/a\u003e to order part #452-00043; there are three per board.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213905205,"sku":"32912","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/c02dbb9d-32912.png?v=1787781806"},{"product_id":"propeller-flip-microcontroller-module","title":"Propeller FLiP Microcontroller Module","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003ePropeller FLiP Microcontroller Module Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Propeller FLiP microcontroller module is compact, convenient, and designed with students in mind.\u003c\/p\u003e\n\u003cp\u003eWith the Propeller FLiP module, students can learn circuit-building and programming with visual BlocklyProp Solo.  Makers can tuck it one into their projects, also using BlocklyProp to get up and running quickly. Design engineers can embed Propeller FLiP modules into production hardware, using the Propeller programming language of their choice.\u003c\/p\u003e\n\u003cp\u003eThe breadboard-friendly Propeller FLiP microcontroller module packs a lot of features into a small, easy-to-use form-factor.  With on-board USB for both communication and power, lots of on-board LEDs, a high-performance 3.3V switching regulator, USB and reverse-polarity protection, and informative, easy-to-read labelling, the Propeller FLiP module will quickly become your go-to microcontroller for all of your inventions!\u003c\/p\u003e\n\u003cp\u003eBlocklyProp’s ease of use combined with pin information printed right on top of the module makes learning fun and prototyping incredibly fast.  The Propeller FLiP has roughly the same pin-out as previous 40-pin DIP Propeller modules.  This design provides improved damage-minimization if inserted in reverse.  When coupled with exceptional power management, the FLiP is a robust module ideally suited for classrooms, projects and finished products alike.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e8-core Propeller 1 (P8X32A) microcontroller system with 64KB EEPROM and 5 MHz oscillator\u003c\/li\u003e\n\u003cli\u003eFully assembled 40-pin DIP package, NO soldering required!\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUSB-C connector with port detection for power, programming, and communication\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUSB reset control can be enabled\/disabled\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e128-byte identification memory that can be permanently locked in read-only mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTwo built-in, user-programmable LEDs peek through vias in the PCB\u003c\/li\u003e\n\u003cli\u003eAdditional LEDs indicate power, TX\/RX communication, and over-current fault\u003c\/li\u003e\n\u003cli\u003eTiny edge-mounted reset button lets you restart the Propeller without disconnecting\u003c\/li\u003e\n\u003cli\u003eWhite blocks by power pins and special-function pins can be color-coded with markers to support student success\u003c\/li\u003e\n\u003cli\u003eSupported by the \u003ca href=\"https:\/\/solo.parallax.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Solo online programming tool\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully open source with free BlocklyProp, C, Spin, and assembly language programming tools\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eNote: \u003c\/span\u003e\u003c\/strong\u003e\u003ca href=\"\/products\/usb-c-to-c-cable\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eUSB C cable required, not included.\u003c\/u\u003e\u003c\/a\u003e The Propeller FLiP Microcontroller Module replaces the PropStick USB (#32210)\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003ePropeller FLiP Microcontroller Module Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: 8-core Propeller 1 P8X32A-Q44\u003c\/li\u003e\n\u003cli\u003eEEPROM: 64 KB on I2C\u003c\/li\u003e\n\u003cli\u003eOscillator: 5 MHz SMT\u003c\/li\u003e\n\u003cli\u003eForm factor: 40-pin DIP with 0.1\" pin spacing\u003c\/li\u003e\n\u003cli\u003eGPIO: 32 accessible, 26 fully free\n\u003cul\u003e\n\u003cli\u003eP26 \u0026amp; P27: user-programmable LEDs\u003c\/li\u003e\n\u003cli\u003eP28 \u0026amp; P29: I2C bus with EEPROM\u003c\/li\u003e\n\u003cli\u003eP30 \u0026amp; P31: Propeller programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input:  5V via USB, or\n\u003cul\u003e\n\u003cli\u003e5–9 VDC via VIN pin on Rev A\u003c\/li\u003e\n\u003cli\u003e5–16 VDC via VIN pin on Rev B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUSB protection: USB limiter and overcurrent \/ shortcircuit protection circuit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUSB-C port detection and USB reset enable\/disable programming\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e3.3 V protection:\n\u003cul\u003e\n\u003cli\u003eswitching supply short circuit and over-current protection\u003c\/li\u003e\n\u003cli\u003ereverse-current protection on 3.3 V output pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent Limits\n\u003cul\u003e\n\u003cli\u003e500 mA from USB port, via 3.3V▷, 5V▷, and I\/O pins (400 mA on Rev A)\u003c\/li\u003e\n\u003cli\u003e1500 mA from USB supply, via 3.3V▷, 5V▷, and I\/O pins\u003c\/li\u003e\n\u003cli\u003e1500 mA from ▷5-9V pin, via 3.3V▷ and I\/O pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial over micro USB-C\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -4 to +185 °F (-20 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: ~ 2.0 x 0.7 in (51 x 18 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: We are currently shipping Rev B, USB C modules. We do not have any more Rev A modules in stock.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/solo.parallax.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Solo Online Programming Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/chrome.google.com\/webstore\/detail\/blocklyprop-launcher\/iddpgcclgepllhnhlkkinbmmafpbnddb\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Launcher for Chromebook\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/getting-started-blocklyprop\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGetting Started with BlocklyProp\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(graphical programming)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/propeller-c\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller C Tutorials\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(text programming)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/tilt-tones-blocklyprop\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTilt Tones with BlocklyProp Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/4x4-keypad-7-segment-led\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKeypad with 7-segment LED BlocklyProp project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p1\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 Community Libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213937973,"sku":"32123","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/48aeffe3-32123-a.jpg?v=1787781806"},{"product_id":"prop-plug-rev-e","title":"Prop Plug Rev E","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Prop Plug provides a USB-to-serial port connection that is convenient for microcontroller programming and communication. This tiny device is capable of asynchronous communication at up to a 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller 1, Propeller 2, and BASIC Stamp microcontrollers. The Prop Plug slips onto a 4-pin, 0.1\" spaced header, allowing both printed circuit boards and breadboards to provide in-circuit programming capability.\u003c\/p\u003e\n\u003ch5\u003eProp Plug Revision Notice:\u003c\/h5\u003e\n\u003cp\u003eUnits shipped starting 1\/28\/2021 are Rev E.  This latest revision of Prop Plug adds pin labeling to both sides of the board, uses 2-sided LEDs which are visible from both sides of the board, and introduces buffered inputs and outputs to improve isolation between the Prop Plug and target board when either is powered down.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eProp Plug Key Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB to serial port conversion\u003c\/li\u003e\n\u003cli\u003eCapable of asynchronous communication up to 3 M baud\u003c\/li\u003e\n\u003cli\u003eCustomer-configurable reset behavior options — new for Rev E\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3 and 5 V microcontrollers\u003c\/li\u003e\n\u003cli\u003eConnects to a 4-pin, 0.1\" spaced header\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/usb-a-to-micro-b-cable\/\" target=\"_blank\" rel=\"noopener\"\u003eUSB A to micro B cable required, not included\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePower Requirements: Powered by USB port (5 VDC)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCurrent requirements: ~15 mA (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB Communication Interface: USB 2.0 Full Speed\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUART Communication Interface: True 3.3V CMOS drive output and TTL input\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eBuffered RX input compatible with 3.3V and 5V signals, tolerant to 5.5V\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eTX and RX activity LEDs, visible from either side of the board\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCommunication Speed: Asynchronous serial, 300 baud to 3 Mbps data rates\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eReset pulse width: ~20 µs (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eConnection: USB microB; 4-pin female SIP socket with 0.1\" spacing\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePCB Dimensions: 0.93 in x 0.48 in (23.5 mm x 12.1 mm)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDimensions with connectors: ~1.3 in x 0.48 in (33 mm x 12.1 mm)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eUSB2SER Replacement\u003c\/h5\u003e\n\u003cp\u003eThis product may be used in place of the discontinued USB2SER Development Tool (#28024).  The two products differ only in pin order; we suggest adapting the Prop Plug pin order with \u003ca href=\"\/products\/100mm-jumper-wires-mf-40-piece-ribbon\/\" target=\"_blank\" rel=\"noopener\"\u003e100mm Jumper Wires, MF 40-piece Ribbon (#800-00063).\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397214331189,"sku":"32201","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/6a9024eb-32201RevEa.jpg?v=1787781806"},{"product_id":"motor-mount-and-wheel-kit-aluminum","title":"Motor Mount and Wheel Kit - Aluminum","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003eMotor Mount and Wheel Kit Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe aluminum Motor Mount and Wheel Kit is a precision-machined mechanical drive system designed for mobile robotic platforms. The brushed motors are worm-gear driven, and the main drive axle (0.5” dia.) is cradled in a ball bearing assembly for smooth-rolling performance. The included 36-position disk Quadrature Encoders resolve to 144 discrete ticks per tire revolution for precision navigation.\u003c\/p\u003e\n\u003cp\u003eReady to build your own custom mid-sized robot?  This kit pairs well with the \u003ca href=\"\/products\/heavy-duty-caster-wheel-kit\/\" target=\"_blank\" rel=\"noopener\"\u003eHeavy Duty Caster Wheel Kit (#64080)\u003c\/a\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMachined 6061 aluminum components for smooth, worry-free performance\u003c\/li\u003e\n\u003cli\u003e60 lb. payload capacity\u003c\/li\u003e\n\u003cli\u003eCompatible with most any microcontroller\u003c\/li\u003e\n\u003cli\u003e144 encoder positions per revolution provide approximately 0.14” of linear travel accuracy\u003c\/li\u003e\n\u003cli\u003eConveniently positioned pre-tapped screw holes for easy mounting\u003c\/li\u003e\n\u003cli\u003e6” pneumatic tires are suitable for a variety of terrain - style and tread may vary\u003c\/li\u003e\n\u003cli\u003eSmooth-rolling quiet performance\u003c\/li\u003e\n\u003cli\u003eAluminum parts precision-machined in California, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAutonomous mobile robotic platform\u003c\/li\u003e\n\u003cli\u003eTele-presence robot drive system\u003c\/li\u003e\n\u003cli\u003eRemote-controlled “sentry robot”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eMotor Mount and Wheel Kit Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDC Motor nominal operating voltage = 12.0 VDC\u003c\/li\u003e\n\u003cli\u003eApprox 95 RPM's @ 12.0 VDC\u003c\/li\u003e\n\u003cli\u003eTorque approx 85 in. lbs per motor assembly\u003c\/li\u003e\n\u003cli\u003eWeight = 2.8 lbs (1.27 kg) per assembly, 5.6 lbs (2.54 kg) per set\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: 12 VDC nominal\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: 2.5 - 8.0+ amps (depending on terrain and load)\u003c\/li\u003e\n\u003cli\u003eCommunication: Dual - Quadrature Encoder outputs (four 5.0 volt tolerant inputs required)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: +32 to +120 °F (0  to +49 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eMotor Mount and Wheel Kit Contents\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003e:\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  - Motor, 12 VDC, 96 W, brushed (left)\u003c\/li\u003e\n\u003cli\u003e(1)  - Motor, 12 VDC, 96 W, brushed (right)\u003c\/li\u003e\n\u003cli\u003e(1)  - 36-position Quadrature Encoder Set (contains 2 encoder assemblies) (#29321)\u003c\/li\u003e\n\u003cli\u003e(2)  - Motor Bearing Block 2 Aluminum\u003c\/li\u003e\n\u003cli\u003e(2)  - Wheel, main rim  - 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003e(2)  - Wheel, rim ring  - 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003e(2)  - Robot Drive Axle 2\u003c\/li\u003e\n\u003cli\u003e(2)  - 1\/8 x 1\" Roll Pin\u003c\/li\u003e\n\u003cli\u003e(12)  - Screw, #4-40x1\/2\", FH, SS\u003c\/li\u003e\n\u003cli\u003e(6)  - Screw, M6,1 mm x 50 mm SH, Black\u003c\/li\u003e\n\u003cli\u003e(2)  - Screw, #1\/4-20x5\/8\",BH,SS\u003c\/li\u003e\n\u003cli\u003e(6)  - Spacer 0.50\" x 1\", RND, AL\u003c\/li\u003e\n\u003cli\u003e(2)  - Tire, 6\" x 1-1\/4\" Rubber w\/tube - style and tread may vary\u003c\/li\u003e\n\u003cli\u003e(2)  - 0.5\" ID x 1.125\" OD Ball Bearing\u003c\/li\u003e\n\u003cli\u003e(1)  - Hex Key, 5 mm\u003c\/li\u003e\n\u003cli\u003e(1)  - Hex Key, 5\/32\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"rotforte\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Parts, part styles, motor wire terminal configuration, and quantities are subject to change without notice.  Simple through-hole soldering required to attach right-angle headers to encoder boards. \u003c\/span\u003eThis product replaces the previous Motor Mount and Wheel Kit (#27971), and the Molded Plastic version (#28963).\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/arlo\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eArlo Assembly Guide and Tutorials\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(Learn site)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216133429,"sku":"28962","price":164.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/520d1801-28962.png?v=1787781810"},{"product_id":"programming-amp-customizing-the-multicore-propeller-microcontroller-official-guide","title":"Programming \u0026amp; Customizing the Multicore Propeller Microcontroller: Official Guide","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eProgramming \u0026amp; Customizing the Multicore Propeller Microcontroller: Official Guide Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eParallax brought together nine experienced authors to write this book containing 12 chapters on the many facets of multicore programming with the Propeller 1 (P8X32A) chip.\u003c\/p\u003e\n\u003cp\u003eThis book begins with an introduction to the Propeller chip’s architecture and Spin programming language, debugging techniques, and sensor interfacing. The remainder of the book introduces eight diverse and powerful applications, ending with a speech synthesis demonstration written by the Propeller chip’s inventor, Chip Gracey.\u003cbr\u003eNumerous illustrations and example programs accompany each application. Example source code and other related resources are available for free download from \u003ca href=\"ftp:\/\/ftp.propeller-chip.com\/\"\u003epropeller-chip.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParallax brought together 9 experienced authors to write 12 chapters on the many facets of multicore programming with the Propeller chip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Propeller Chip Multi-core Microcontroller - Jeff Martin\u003c\/li\u003e\n\u003cli\u003eIntroduction to Propeller Programming - Jeff Martin\u003c\/li\u003e\n\u003cli\u003eDebugging Code for Multiple Cores - Andy Lindsay\u003c\/li\u003e\n\u003cli\u003eSensor Basics for Multprocessing - Andy Lindsay\u003c\/li\u003e\n\u003cli\u003eWirelessly Networking Propeller Chips - Martin Hebel\u003c\/li\u003e\n\u003cli\u003eDanceBot, a Balancing Robot - Hanno Sander\u003c\/li\u003e\n\u003cli\u003eControlling a Robot with Computer Vision - Hanno Sander\u003c\/li\u003e\n\u003cli\u003eUsing Multi-core for Networking Applications using an Off-the-shelf Ethernet Chip - Shane Avery\u003c\/li\u003e\n\u003cli\u003ePortable Multivariable GPS Tracking and Data Logger - Joshua Hintze\u003c\/li\u003e\n\u003cli\u003eUsing the Propeller as a Remote Virtual Peripheral for Media Applications - Andre’ LaMothe\u003c\/li\u003e\n\u003cli\u003eThe HVAC Green House Model - Vern Graner\u003c\/li\u003e\n\u003cli\u003eSynthesizing Speech with the Propeller - Chip Gracey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eDetails:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTitle: Programming \u0026amp; Customizing the Propeller Multicore Microcontroller: Official Guide\u003c\/li\u003e\n\u003cli\u003ePublisher: McGraw-Hill\u003c\/li\u003e\n\u003cli\u003eISBN: 9780071664509\u003c\/li\u003e\n\u003cli\u003eDimensions: 7.25x9x1.2 in (18.4x22.7x3 cm)\u003c\/li\u003e\n\u003cli\u003ePaperback\/Black \u0026amp; White printing\/approx 500 pages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.bookdepository.com\/book\/9780071664509\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBook Depository\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"ftp:\/\/ftp.propeller-chip.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBook Example code and resources (FTP site)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p1\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 Community Libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397218722101,"sku":"32316","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/0e822988-32316_0.png?v=1787781817"},{"product_id":"64-kb-smt-eeprom-m24512","title":"64 KB SMT EEPROM M24512","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003e64 KB SMT EEPROM M24512 Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe 64 KB SMT EEPROM M24512-RDW6TP has 64 KB of non-volatile memory that supports random reads and writes over an I2C bus.  When used to store a Propeller program, the Propeller will write its program to the lower 32 KB of address space, filling the unused space with a null value.  It will not modify the upper 32 KB of address space, making it ideal for long-term data storage.  The EEPROM is in a 8-pin TSSOP package.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEnough memory for a 32 KB Propeller program and 32 KB of user space\u003c\/li\u003e\n\u003cli\u003eSmall TSSOP package\u003c\/li\u003e\n\u003cli\u003eI2C interface uses only 2 I\/O pins that can be shared with other devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e64 KB SMT EEPROM M24512 Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage requirements: 1.8 to 5.5 VDC\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: 3 mA max\u003c\/li\u003e\n\u003cli\u003eCommunication protocol: I2C\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.15 x 0.19 x 0.06 in (3.99 x 5.0 x 1.75 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -67 to +257 °F (-55 to +125 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219705141,"sku":"602-10001","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a680698d-602-10001.png?v=1787781821"},{"product_id":"flip-protoboard-kit","title":"FLiP ProtoBoard Kit","description":"\u003ch5\u003eFLiP ProtoBoard Kit Overview\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHave a project that needs a permanent platform? \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eLook no further- the FLiP ProtoBoard is your board!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eParallax’s new FLiP ProtoBoard is the ideal choice for building dedicated circuits with your own multicore \u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 FLiP module (not included)\u003c\/a\u003e and makes it easy to interface the microcontroller with the real world. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe FLiP ProtoBoard has a large prototyping area and has spaces for screw terminals, header pins and sockets, WiFi, P2 accessories, Qwiic accessories, Click modules, Servo headers, LEDs, power switches, LDO power regulation, and more!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe FLiP ProtoBoard reduces the project cost of using the Propeller 1, as your own Propeller FLiP Module can be moved from project to project. And for system builders, the FLiP ProtoBoard provides a robust reliable solution, rapid prototyping and quick path to market for designs based on our multicore Propeller microcontroller. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFLiP ProtoBoard Kit Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePropeller FLiP module socket area on the top side of the PCB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUser circuits can be built on either side of the PCB, with labels duplicated on both sides\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVersatile protoboard arrangement, clearly marked with access to every Propeller IO pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower input via screw terminal, 0.1” header or 2.1 mm center-positive DC barrel jack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCB has rounded corners and gold plated pads\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGrounded corner mounting holes, 3.2mm diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUp to 8x screw terminals accept 26AWG...16AWG wire, and can be easily connected to IOs and\/or power rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVertical Qwiic socket footprint supporting a range of third-party I2C accessories\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports up to two MIKROE Click module footprints, one on the front, one on the back\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWiFi ready – 10-way socket compatible with the Parallax WiFi SIP module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports two single P2 style accessories, with space reserved for one dual P2 accessory\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLDO footprint and space for bypass capacitors allows for additional voltages (VAUX)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTwo 0.1” pitch LED footprints, easily connected to power or IO signals\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDedicated footprint for standard 6mm x 6mm tactile Reset button\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eArea for six standard 3-way servo style headers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eArea for four standard 3 or 4-way accessory headers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower path header footprint allows easy connection for on\/off switches or shunt jumpers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePower and ground rails available at multiple locations around the prototyping area\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCB dimensions and mounting holes compatible with the Parallax small robot chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTop-edge IOs have silk blocks for user labeling with a permanent marker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBottom of PCB has larger silk area for user labeling; such as name or version identity\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFLiP ProtoBoard Kit Contents:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 1K\u003c\/li\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 3.9K\u003c\/li\u003e\n\u003cli\u003e(10) - Resistor 1\/4W 10K\u003c\/li\u003e\n\u003cli\u003e(1) - Capacitor Ceramic \u003cspan style=\"font-weight: 400;\"\u003e1uF\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - Capacitor Electrolytic 10uF\u003c\/li\u003e\n\u003cli\u003e(1) - LED T1-3\/4 Red\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eLED T1-3\/4 Green\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eSwitch 6x6mm Tactile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003ePin Socket 2.54mm (0.1”) 1x10\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) - \u003cspan style=\"font-weight: 400;\"\u003ePin Socket 2.54mm (0.1”) 1x20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) - \u003cspan style=\"font-weight: 400;\"\u003ePin Header 2.54mm (0.1”) 1x20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) - \u003cspan style=\"font-weight: 400;\"\u003eShunt Jumper 2.54mm (0.1”) 2-pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eConnector 2.1mm DC Barrel Jack Socket\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eConnector Qwiic Vertical\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) - \u003cspan style=\"font-weight: 400;\"\u003eConnector 3.81mm (0.15”) Screw Terminal 2-pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eRegulator LDO 5V 1.5A (LD29150DT50R)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) - \u003cspan style=\"font-weight: 400;\"\u003eFLiP ProtoBoard Bare PCB\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe FLiP ProtoBoard package includes the bare prototyping board with user-solderable headers, screw terminals, and commonly used components as listed above. Soldering required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe \u003c\/span\u003e\u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePropeller 1 FLiP Module\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e is NOT included, and must be purchased separately - refer to the list of “getting started” parts below, which are recommended for new customers, and can be shared by multiple FLiP ProtoBoards when building multiple projects:\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eRecommended parts that are not included in the FLiP ProtoBoard kit:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eFLiP Module (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#32123\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eWiFi SIP Module (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#32420S\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eUSB A to Micro B Cable (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#805-00016\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e7.5 VDC 1.6 Amp Power Supply (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#750-00009\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eAssorted 3-Wire Extension Cable 30-Pack (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#751-00010\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eP2 Accessory modules compatible with the FLiP module and FLiP ProtoBoard kit:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eUniversal Motor Driver P2 Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64010\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 RTC Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64013\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval Control Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006A\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval LED Matrix Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006C\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 microSD Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64009\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eP2 Eval Mini Prototyping Add-on Board (\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e#64006E\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eP2-ES Eval Protoboard Add-on (#64005-ES)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forums.parallax.com\/\" rel=\"noopener\" target=\"_blank\"\u003eParallax Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/obex.parallax.com\/obex\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller OBEX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226946869,"sku":"32120","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/775d29fa-32120-parts-1.jpg?v=1787781841"},{"product_id":"propeller-1-chip-44-pin-qfp-chip","title":"Propeller 1 Chip – 44-Pin QFP Chip","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003ePropeller 1 P8X32A Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Propeller 1 chip is a multicore microcontroller that is programmable in high-level languages Blockly, C, and Spin, as well as a low-level (Propeller assembly) language.  Application development is simplified by using the set of pre-built objects for video (NTSC\/PAL\/VGA), mice, keyboards, LCDs, stepper motors and sensors.\u003c\/p\u003e\n\u003cp\u003eThe Propeller is designed with an emphasis on general-purpose use, with powerful capabilities that are great for customized high-speed embedded processing, while maintaining low power, low current consumption and a small physical footprint.  The Propeller’s processors are all identical, each with its own separate memory, and each with an identical interface to all 32 I\/O pins and internal shared memory.  The architecture is built for swift processing of asynchronous events, equal access to internal and external resources, and dynamic speed and power when it’s needed.\u003c\/p\u003e\n\u003cp\u003eThe P8X32A-Q44 is useful for production-level SMT-based circuits. The Propeller is easily connected to your computer’s serial or USB port for programming using our Prop Plug. The Propeller chip can run on its own with a 3.3-volt power supply, internal clock, and with its internal RAM for code storage. Add an external EEPROM for non-volatile code storage and an external clock source for accurate timing.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMulticore processing simplifies designs subject to asynchronous requirements\u003c\/li\u003e\n\u003cli\u003eQFP package for small footprint circuits\u003c\/li\u003e\n\u003cli\u003eBuilt-in Spin language is easy to learn\u003c\/li\u003e\n\u003cli\u003ePropGCC support provides a familiar feel for C\/C++ programmers\u003c\/li\u003e\n\u003cli\u003ePropeller Assembly language supports deterministic timing using single-path, multi-decision techniques\u003c\/li\u003e\n\u003cli\u003eInternal or external clock sources provide flexible speed options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e 160 Tested Chips in a Tray. \u003c\/p\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e\n\u003cspan class=\"forte\"\u003eP8X32A-Q44\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003eDetails:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: 2.7 to 3.3 VDC\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial for programming\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.39 x 0.39 x 0.05 in (10 x 10 x 1.4 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -67 to +257 °F (-55 to +125 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eP8X32A-Q44 Pin Assignments:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eP0-P31: General purpose I\/O.  Can source\/sink 40 mA each at 3.3 VDC\u003c\/li\u003e\n\u003cli\u003eP31: Rx from host (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eP30: Tx to host (general purpose I\/O after boot up\/download)\u003c\/li\u003e\n\u003cli\u003eP29: I2C SDA connection to external EEPROM (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eP28: I2C SCL connection to external EEPROM (general purpose I\/O after boot up)\u003c\/li\u003e\n\u003cli\u003eVdd: Power (3.3 VDC)\u003c\/li\u003e\n\u003cli\u003eVss: Ground (0 VDC)\u003c\/li\u003e\n\u003cli\u003eBOEn: Brown Out Enable (active low). Must be connected to either Vdd or Vss.  If low, RESn becomes a weak output (~5 KΩ) for monitoring purposes but can be driven low to cause reset. If high, RESn is a CMOS input with Schmitt Trigger.\u003c\/li\u003e\n\u003cli\u003eRESn: Reset (active low). When low, resets the Propeller chip; all cogs disabled and I\/O pins floating. Propeller restarts 50 ms after RESn transitions from low to high.\u003c\/li\u003e\n\u003cli\u003eXI: Crystal \/ clock input. Can connect to crystal or oscillator\u003c\/li\u003e\n\u003cli\u003eXO: Crystal Output. Provides feedback for an external crystal. Internal C and R selectable for crystals (no other components required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLong-term supply notification from company owner: The Propeller chip is a full-custom, Parallax design in entirety, unencumbered from any third-party intellectual property obligations. Parallax endeavors to supply Propellers as long as we have demand (i.e., foreseeable future, a minimum 20 to 25 years).\u003c\/p\u003e\n\u003cp\u003eAs an example of our commitment, Parallax still manufactures the BASIC Stamp 1, designed over 20 years ago. For these reasons, customers should have no concern about the long-term supply of Propeller chips. If you have any concern about long-term supply please feel free to contact us for personal communication.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p1\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 1 Community Libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53634041250101,"sku":"P8X32A-Q44","price":11.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/P8X32A-Q44.png?v=1790179701"}],"url":"https:\/\/shop.parallax.com\/collections\/propeller-1.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}