{"title":"Displays \u0026 Indicators","description":null,"products":[{"product_id":"3-function-infrared-universal-remote","title":"3 Function Infrared Universal Remote","description":"\u003ch5\u003e3 Function Infrared Universal Remote Overview:\u003c\/h5\u003e\n\u003cp\u003eThis 3 function infrared universal remote controller is programmable for use with many different brands of televisions and other devices. But, we think it is most fun when used to control your robot!  Signals from this remote are compatible with the IR Receiver included in the Boe-Bot, Shield-Bot, and ActivityBot robot kits.  Your robot's microcontroller brain can decode the remote's signals, and then drive or blink lights or make sounds in response. Our \u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/hardware\/accessories\/ir-remote\" rel=\"noopener\" target=\"_blank\"\u003eIR Remote tutorials and projects\u003c\/a\u003e show you how.\u003c\/p\u003e\n\u003cp\u003eThe remote comes un-programmed; use its enclosed instructions or follow the video above to set it to Sony protocol for use with Parallax projects.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLarge number are easy to read and push\u003c\/li\u003e\n\u003cli\u003e5-button direction pad and four additional function keys provide more options for custom applications\u003c\/li\u003e\n\u003cli\u003eManual included to program the remote for compatibility with dozens fo different TV manufacturer's protocols\u003c\/li\u003e\n\u003cli\u003eExample applications or code support for BASIC Stamp, Arduino, Propeller C, and BlocklyProp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e3 Function Infrared Universal Remote Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-digit keypad\u003c\/li\u003e\n\u003cli\u003e5-button directional pad\u003c\/li\u003e\n\u003cli\u003e4 additional function keys\u003c\/li\u003e\n\u003cli\u003ePower and Setup keys for programming\u003c\/li\u003e\n\u003cli\u003ePower Requirements: Two 1.5 V AA batteries (3 VDC), not included\u003c\/li\u003e\n\u003cli\u003eCommunication: IR Modulated at 38.5 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 6.75 x 2 x 1.37 in (171.45 x 50.8 x 34.7 mm)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eThis Remote is Included with These Kits:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ir-remote-parts-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eIR Remote Parts Kit (\u003cspan\u003e29122)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/activitybot-360-12-pack-plus-for-classrooms\/\" target=\"_blank\" rel=\"noopener\"\u003eActivityBot 360° 12-pack Plus for classrooms (\u003cspan\u003e32612)\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/shield-bot-with-arduino-12-pack-plus-kit-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot with Arduino 12-pack Plus for classrooms (\u003cspan\u003e32339)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/cyber-bot-robot-12-pack-plus-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot with micro:bit 12-pack Plus for classrooms (32712)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIR Remote Controlled Shield-Bot –  Arduino Project\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/project\/remote-control-rock-talk-and-roll-activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eRemote Control Rock, Talk \u0026amp; Roll ActivityBot – Propeller C Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/propeller-c-simple-devices\/ir-receiver-and-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Receiver and Remote – Propeller C Tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/support\/reference\/activity-board-wx-block-reference\/sensor\/sony-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Remote Block Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/robot\/activitybot\/ir-remote-control-activitybot-blockly\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Remote Control ActivityBot with Blockly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213479221,"sku":"020-00001","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/7f535aeb-020-00001.png?v=1787781806"},{"product_id":"parallax-2-x-16-serial-lcd-with-piezo-speaker-backlit","title":"Parallax 2 x 16 Serial LCD with Piezo Speaker (Backlit)","description":"\u003ch5\u003e\u003cstrong\u003eParallax 2 x 16 Serial LCD with Piezo Speaker (Green Backlit) Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe Parallax Serial LCDs (liquid crystal displays) can be easily connected to and controlled by a microcontroller using a simple serial protocol sent from a single I\/O pin. The LCD displays provide basic text wrapping so that your text looks correct on the display. Full control over all of their advanced LCD features allows you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support visible ASCII characters Dec 32-127). In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. An onboard piezospeaker provides audible output, with full control over tone note, scale and duration using ASCII characters Dec 208–232.\u003c\/p\u003e\n\u003cp\u003eThis model features 2 rows of 16 black characters on a green backlit field.  It is also available in \u003ca href=\"\/products\/parallax-4-x-20-serial-lcd-with-piezospeaker-backlit\" rel=\"noopener\" target=\"_blank\"\u003e4 rows by 20 characters (#27977)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClear 40-pixel characters support ASCII DEC 32-127\u003c\/li\u003e\n\u003cli\u003eTurn backlighting on or off with a single command\u003c\/li\u003e\n\u003cli\u003eEight user-definable custom characters\u003c\/li\u003e\n\u003cli\u003eMove the cursor anywhere or clear the display with a single command\u003c\/li\u003e\n\u003cli\u003eBuild-in piezospeaker lets you add audible alert tones\u003c\/li\u003e\n\u003cli\u003eBaud mode selector and adjustable contrast on the back of the display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional-looking text and tone output on any microcontroller application\u003c\/li\u003e\n\u003cli\u003eEasy serial debugging without a PC\u003c\/li\u003e\n\u003cli\u003eReal-time sensor data output on autonomous robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Styles and dimensions may vary slightly.\u003c\/strong\u003e This product is a compatible replacement for the discontinued 2x16 Serial LCD (Non-backlit), #27976.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eParallax 2 x 16 Serial LCD with Piezo Speaker (Green Backlit) Details:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 rows x 16 characters\u003c\/li\u003e\n\u003cli\u003eBuilt-in piezospeaker\u003c\/li\u003e\n\u003cli\u003eTest mode verifies display functionality\u003c\/li\u003e\n\u003cli\u003eYG LED backlit display\u003c\/li\u003e\n\u003cli\u003eAdjustable contrast knob\u003c\/li\u003e\n\u003cli\u003eBaud rate switches on back of device\u003c\/li\u003e\n\u003cli\u003ePower requirements: +5 VDC, 20 mA (light off), ~ 80 mA typical (light on)\u003c\/li\u003e\n\u003cli\u003eSelectable asynchronous serial baud rates: 2400, 9600, 19200\u003c\/li\u003e\n\u003cli\u003eApproximate dimensions (may vary): 1.42 x 3.15 in (36 x 80 mm)\u003c\/li\u003e\n\u003cli\u003eConnection: 3-pin male header with 0.1\" spacing for ground, power, and input signal\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -4 to +158 °F (-20 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNotes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe LCDs currently for sale are updated to Revision F. Basic functionality remains the same, but power requirements and the layout of the backpack have changed. Please see the documentation for information on your model.\u003c\/li\u003e\n\u003cli\u003eThis device can be connected to a PC serial port using a MAX232 line driver. The circuit isn't supported by Parallax, but it's possible to make this connection with a few extra parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/support\/reference\/propeller-blocklyprop-block-reference\/communicate\/serial-lcd\" rel=\"noopener\" target=\"_blank\"\u003eBlocklyProp Serial LCD Block Reference (Learn site)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials-menu\/propeller-c\/\" target=\"_blank\" rel=\"noopener\"\u003eHalf-Duplex Serial with LCD – Propeller C Tutorial\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/courses\/the-magic-bs2-board-project\/\" rel=\"noopener\" target=\"_blank\"\u003eMagic BS2 Board – BASIC Stamp Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/KickStart\/27977\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSerial LCD KickStart – PBASIC, Arduino, and Propeller Spin examples\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213708597,"sku":"27977","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/06087f32-27977RevFd.jpg?v=1787781806"},{"product_id":"ir-remote-parts-kit","title":"IR Remote Parts Kit","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eIR Remote Parts Kit Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eWith a universal remote and an infrared receiver, you can add a wireless keypad to your microcontroller applications. The parts in this kit along with the example programs make it possible to enter values and control your projects in the same way you might with a TV or other entertainment system component. Applications and sample code for all BASIC Stamp models, Arduino for the Shield-Bot, Propeller C and BlocklyProp for the ActivityBot, and MicroPython for the cyber:bot are linked below; be sure to check out both the Downloads and Additional Resources.\u003c\/p\u003e\n\u003cp\u003eThe remote comes un-programmed; use its enclosed instructions or \u003ca href=\"https:\/\/youtu.be\/nkqqFhyIuqo\" rel=\"noopener\" target=\"_blank\"\u003efollow the video\u003c\/a\u003e to set it to Sony protocol for use with Parallax projects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e Requires 2 alkaline AA batteries, not included.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eIR Remote Parts Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Remote with manufacturer manual (#020-00001)\u003ca href=\"https:\/\/www.parallax.com\/node\/436\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIR detector (#350-00056)\u003c\/li\u003e\n\u003cli\u003e220 ohm Resistor (#150-02210)\u003c\/li\u003e\n\u003cli\u003eJumper wires (bag of 10) (#800-00016)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/nkqqFhyIuqo\/\" rel=\"noopener\" target=\"_blank\"\u003eTiny Tutorials: Setting up your Sony Remote for Robotics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/project\/ir-remote-controlled-shield-bot\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Remote Controlled Shield-Bot –  Arduino Project \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/cyberbot\/control-your-cyberbot-infrared-tv-remote\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eControl your cyber:bot with an Infrared TV Remote \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/project\/remote-control-rock-talk-and-roll-activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eRemote Control Rock, Talk \u0026amp; Roll ActivityBot – Propeller C Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/propeller-c-simple-devices\/ir-receiver-and-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Receiver and Remote – Propeller C Tutorial \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/ab-blocks\/sony-remote\" rel=\"noopener\" target=\"_blank\"\u003eBlocklyProp Block Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/robot\/activitybot\/ir-remote-control-activitybot-blockly\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Remote Control ActivityBot with Blockly \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-kits-platforms\/\" rel=\"noopener\" target=\"_blank\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215379765,"sku":"29122","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/2fb36289-29122.png?v=1787781809"},{"product_id":"infrared-t1-3-4-led","title":"Infrared T1 3\/4 LED","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eInfrared T1 3\/4 LED Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eT1 3\/4 Infrared light emitting diode, for breadboard or through-hole projects. Used with the LED Standoff and LED Light Shield to build the \u003ca href=\"\/products\/ir-transmitter-assembly-kit\" rel=\"noopener\" target=\"_blank\"\u003eIR Transmitter Assembly \u003c\/a\u003e(#350-00017).\u003c\/p\u003e\n\u003cp\u003eFrequently used with the IR Receiver for object detection and autonomous robot navigation, this is a compatible replacement wherever an Infrared LED is found in any of our \u003ca href=\"\/collections\/educational-kits\/\" rel=\"noopener\" target=\"_blank\"\u003eEducation Kits\u003c\/a\u003e Components Listings.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-infrared-flashlights\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Infrared Flashlights Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/courses\/infrared-light-navigation-for-the-cyberbot\/lessons\/infrared-light-signals\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigating with Infrared Headlights for Arduino BOE Shield-Bot\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397217706293,"sku":"350-00003","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/74af047e-350-00003.png?v=1787781817"},{"product_id":"ir-transmitter-assembly-kit","title":"IR Transmitter Assembly Kit","description":"\u003cp class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe IR Transmitter Kit consists of: \u003ca href=\"\/products\/infrared-t1-3-4-led\/\" rel=\"noopener\" target=\"_blank\"\u003eIR LED (#350-00003)\u003c\/a\u003e, LED Standoff, and LED Light Shield. Assembly required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"view view-related-products view-id-related_products view-display-id-default view-dom-id-8184a0a732c57dd0e854bf3560e8be6a\"\u003e\n\u003cdiv class=\"view-header\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-infrared-flashlights\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Infrared Flashlights Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/courses\/infrared-light-navigation-for-the-cyberbot\/lessons\/infrared-light-signals\/\" target=\"_blank\" rel=\"noopener\"\u003eNavigating with Infrared Headlights for Arduino BOE Shield-Bot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNavigate with Infrared Sensors for Propeller Boe-Bot in SPIN\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397217902901,"sku":"350-00017","price":2.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/76bc14cd-350-00017.png?v=1787781817"},{"product_id":"infrared-receiver-for-parallax-small-robots","title":"Infrared Receiver for Parallax Small Robots","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eInfrared Receiver Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eInfrared receiver with 38 kHz carrier frequency, for use as a replacement part with the following small robot kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASIC Stamp Boe-Bot\u003c\/li\u003e\n\u003cli\u003eRobot Shield Kit for Arduino\u003c\/li\u003e\n\u003cli\u003ePropeller ActivityBot\u003c\/li\u003e\n\u003cli\u003ecyber:bot for micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwo are included in this \u003ca href=\"\/products\/small-robot-electronics-pack\/\" target=\"_blank\" rel=\"noopener\"\u003eSmall Robot Electronics Pack (\u003cspan\u003e572-28132)\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.parallax.com\/node\/317\"\u003e\u003c\/a\u003e that is compatible with all of our Parallax Small Robots.  It is also suitable for receiving infrared signals from our Universal Remote. For robotics navigation activities, we recommend purchasing replacements in pairs, since models supplied in kits may vary.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/propeller-c-simple-devices\/ir-receiver-and-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Receiver and Remote Propeller C Tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-infrared-flashlights\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Infrared Flashlights Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397217870133,"sku":"350-00056","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/eae9c683-350-00039.png?v=1787781817"},{"product_id":"850nm-t1-3-4-phototransistor","title":"850NM T1 3\/4 Phototransistor","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e850NM T1 3\/4 Phototransistor Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis phototransistor responds to visible light as well as the lower infrared range.\u003c\/p\u003e\n\u003cp\u003eWhile not a drop-in replacement for a CdS-cell photoresistor, this RoHS compliant phototransistor can be used in many similar circuits and applications.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e850NM T1 3\/4 Phototransistor Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetects light in the 450 to 1050 nm range\u003c\/li\u003e\n\u003cli\u003eLight intensity controls current\u003c\/li\u003e\n\u003cli\u003eEasy to use with RC-time circuits and programs\u003c\/li\u003e\n\u003cli\u003eThrough-hole package with clear plastic lens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-visible-light\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Visible Light Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397218001205,"sku":"350-00029","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/4b2b852e-350-00029.png?v=1787781816"},{"product_id":"ws2812b-rgb-led-module","title":"WS2812B RGB LED Module","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eWS2812B RGB LED Module Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe WS2812B RGB LED Module is a small module with BIG color.  The module has a special LED on board that contains three separate LEDs – red, green, and blue – as well as a smart control IC that can individually drive each LED.  Each color has 256 intensity levels which allows the module to produce 24-bit color, or more than 16 million colors.  Each module is instructed by using a special serial protocol.  This protocol allows many modules to be daisy-chained together so that one microcontroller can control the whole lot – with a single data signal.  Any number of these modules can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin.\u003c\/p\u003e\n\u003cp\u003eCaution - these LEDs are extremely bright! You might want to avoid looking directly at them up close when lit.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eWS2812B RGB LED Module Key Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eString many together to make an array of individually addressable lights\u003c\/li\u003e\n\u003cli\u003eWith 24-bit color, each module can display more than 16 million unique colors of the rainbow\u003c\/li\u003e\n\u003cli\u003eThe module’s small size is breadboard-friendly with 0.1” header spacing\u003c\/li\u003e\n\u003cli\u003eControl all LEDs in a chain with a single I\/O pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eWS2812B RGB LED Module Application Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHoliday decorations\u003c\/li\u003e\n\u003cli\u003eMulti-color status LED for your project\u003c\/li\u003e\n\u003cli\u003eColor-changing robotic eyes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e The WS2812B is designed for operation with high-speed 5-volt devices.  It requires a 3.5 to 5.3 volt power supply, and data signals that reach at least 70% of the power supply voltage, so a 3.6-volt or higher signal is required when powered from a 5-volt supply.  To use a 3.3-volt signal, including those generated by the Propeller microcontroller, we recommend powering the WS2812B module from a 3.5- to 4.75-volt power supply.  To meet the signal timing, we recommend a microcontroller running at 15 MIPS or faster.  The BASIC Stamp series is not capable of generating WS2812B compatible signals.\u003c\/p\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eWS2812B RGB LED Module Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage requirements: 5 V\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: Up to 50 mA\u003c\/li\u003e\n\u003cli\u003eCommunication: Custom asynchronous serial\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.5 in x 0.4 in (1.27 cm x 1.02 cm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -13 to +172 °F (-25 to +80 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eWS2812B RGB LED Module Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) WS2812B RGB LED Module (#550-28085)\u003c\/li\u003e\n\u003cli\u003e(2) 3-pin header (#451-00301)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219770677,"sku":"28085","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/7d514ed9-28085.png?v=1787781821"},{"product_id":"7-segment-led","title":"7-Segment LED","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e7-Segment LED Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis component is sourced to be a compatible replacement part for all Parallax tutorials where a 7-segment LED is used, including the Propeller FLiP Try-it Kit, What's a Microcontroller? and the Propeller C Tutorials; see Additional Resources links below for projects.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e7-Segment LED Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplays standard 0.56\" (14.22 mm) tall digits\u003c\/li\u003e\n\u003cli\u003eEasy to read with light yellow-green LEDs on a dark background\u003c\/li\u003e\n\u003cli\u003eRight-hand decimal point  - group with others to display currency or floating-point values\u003c\/li\u003e\n\u003cli\u003eCommon-cathode configuration\u003c\/li\u003e\n\u003cli\u003eBreadboard-friendly 0.1\" pin spacing\u003c\/li\u003e\n\u003cli\u003e2 V forward voltage per segment\u003c\/li\u003e\n\u003cli\u003e20 mA continuous\/60 mA peak forward current per segment\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -4 to +185 °F (-20 to +85 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/span\u003e LED color and case style\/color may vary. Datasheet supplied below is representative of, but not necessarily identical to, part currently supplied.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/circuit-practice-blocklyprop\/seven-segment-display\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSeven-Segment Display BlocklyProp Tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/4x4-keypad-7-segment-led\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKeypad and 7-segment LED BlocklyProp Project\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220000053,"sku":"350-00027","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/073ff35c-350-00027.png?v=1787781820"},{"product_id":"parallax-4-x-20-serial-lcd-with-piezospeaker-backlit","title":"Parallax 4 x 20 Serial LCD with Piezospeaker (Backlit)","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax 4 x 20 Serial LCD with Piezospeaker (Backlit) Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax Serial LCDs (liquid crystal displays) can be easily connected to and controlled by a microcontroller using a simple serial protocol sent from a single I\/O pin. The LCD displays provide basic text wrapping so that your text looks correct on the display. Full control over all of their advanced LCD features allows you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support visible ASCII characters Dec 32-127). In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. An onboard piezospeaker provides audible output, with full control over tone note, scale and duration using ASCII characters Dec 208–232.\u003c\/p\u003e\n\u003cp\u003eThis model features 4 rows of 20 black characters a green backlit field. It is also available in  \u003ca href=\"\/products\/parallax-2-x-16-serial-lcd-with-piezo-speaker-backlit\/\" rel=\"noopener\" target=\"_blank\"\u003egreen backlit (#27977)\u003c\/a\u003e .\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClear 40-pixel characters support ASCII DEC 32-127\u003c\/li\u003e\n\u003cli\u003eTurn backlighting on or off with a single command\u003c\/li\u003e\n\u003cli\u003eEight user-definable custom characters\u003c\/li\u003e\n\u003cli\u003eMove the cursor anywhere or clear the display with a single command\u003c\/li\u003e\n\u003cli\u003eBuilt-in piezospeaker lets you add audible alert tones\u003c\/li\u003e\n\u003cli\u003eBaud mode selector and adjustable contrast on the back of the display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional-looking text user interface on any microcontroller application\u003c\/li\u003e\n\u003cli\u003eEasy serial debugging without a PC\u003c\/li\u003e\n\u003cli\u003eReal-time sensor data output on autonomous robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax 4 x 20 Serial LCD with Piezospeaker (Backlit) Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 rows x 20 characters\u003c\/li\u003e\n\u003cli\u003eBuilt-in piezospeaker\u003c\/li\u003e\n\u003cli\u003eTest mode verifies display functionality\u003c\/li\u003e\n\u003cli\u003eAdjustable contrast knob\u003c\/li\u003e\n\u003cli\u003eBaud rate switches on back of device\u003c\/li\u003e\n\u003cli\u003ePower requirements: +5 VDC, 20 mA (light off), ~80 mA typical (light on)\u003c\/li\u003e\n\u003cli\u003eSelectable asynchronous serial baud rates: 2400, 9600, 19200\u003c\/li\u003e\n\u003cli\u003eConnection: 3-pin male header with 0.1\" spacing for ground, power, and input signal\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.37 x 3.86 in (60.2 x 98.1 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -4 to +158 °F (-20 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe LCDs currently for sale are updated to Revision F. Basic functionality remains the same, but power requirements and the layout of the backpack have changed. Please see the documentation for information on your model.\u003c\/li\u003e\n\u003cli\u003eThis device can be connected to a PC serial port using a MAX232 line driver. The circuit isn't supported by Parallax, but it's possible to make this connection with a few extra parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials-menu\/propeller-c\/\" rel=\"noopener\" target=\"_blank\"\u003eHalf-Duplex Serial Tutorial – Propeller C\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/support\/reference\/propeller-blocklyprop-block-reference\/communicate\/serial-lcd\" rel=\"noopener\" target=\"_blank\"\u003eBlocklyProp Serial LCD Block Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220655413,"sku":"27979","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a8da7c7a-27979.png?v=1787781821"},{"product_id":"color-oled-display-module-96-x-64","title":"Color OLED Display Module, 96 x 64","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eColor OLED Display Module Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe 96x64 Color OLED display is perfect for displaying graphics, text, and images in bright, beautiful colors.  Use it on its own to enjoy the graphics, or as part of a bigger project to display information to the user. It's a great accessory for Propeller or Arduino based STEM or STEAM projects.\u003c\/p\u003e\n\u003cp\u003eThe display portion of the OLED module measures 0.95\" diagonal and contains 96 x 64 RGB pixels. Each pixel can be set with 16 bits of resolution for a large range of colors. OLED technology does not require a backlight, which results in a colorful, high contrast display.\u003c\/p\u003e\n\u003cp\u003eYour microcontroller can talk to the display's on-board SSD1331 driver chip using a 5-wire, write-only SPI interface.  An on-board boost converter properly powers the display, which can be used with with either 3.3 or 5V logic levels.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eColor OLED Display Module Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOLED technology for high contrast and vivid colors\u003c\/li\u003e\n\u003cli\u003eFully assembled, breadboard-friendly 7-pin SIP form factor\u003c\/li\u003e\n\u003cli\u003eEasy-to-use C libraries and Spin object for the Propeller Microcontroller\u003c\/li\u003e\n\u003cli\u003eSupported by \u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/oled-display-blocklyprop\" target=\"_blank\" rel=\"noopener\"\u003eBlocklyProp graphical programming tutorials\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFour mounting holes for installation in permanent projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInformation readout\u003c\/li\u003e\n\u003cli\u003eSensor module display\u003c\/li\u003e\n\u003cli\u003eHandheld game console screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eColor OLED Display Module Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Chip: SSD1331\u003c\/li\u003e\n\u003cli\u003eInterface: 5-wire SPI (clock, data, chip select, data\/command, reset)\u003c\/li\u003e\n\u003cli\u003eResolution: 96 x 64\u003c\/li\u003e\n\u003cli\u003eDisplay Size: 0.95 inch diagonally\u003c\/li\u003e\n\u003cli\u003eColors: RGB, 65K colors\u003c\/li\u003e\n\u003cli\u003eVisible Angle:\u0026gt;160°\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: 3-5 VDC\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.17 x 3.7 cm\u003c\/li\u003e\n\u003cli\u003eOperating Temp. (-20 to +70℃)\u003c\/li\u003e\n\u003cli\u003eStorage Temp. (-30 to +80 ℃)\u003c\/li\u003e\n\u003cli\u003eNot RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/solo.parallax.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Solo Online Programming Tool for Propeller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/oled-display-blocklyprop\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eOLED Display with BlocklyProp tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/support\/reference\/propeller-blocklyprop-block-reference\/communicate\/oled\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp OLED Display block reference\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/youtu.be\/C0gSkaNhiVo\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTiny Tutorials: Using Multiple OLED Screens\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(YouTube)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/rfid-scan-and-store-eeprom-project\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp project “RFID Scan \u0026amp; Store to EEPROM”\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-SSD1331-OLED-Driver-Library-for-Arduino\" rel=\"nofollow noopener noreferrer\" target=\"_blank\"\u003eArduino driver library\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/obex.parallax.com\/microcontroller\/propeller-2\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Spin Language Driver\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220589877,"sku":"28087","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/2fe77955-28087.png?v=1787781821"},{"product_id":"296-x-128-2-9-inch-epaper-display","title":"296 x 128 2.9 inch ePaper Display","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e296 x 128 2.9 inch ePaper Display Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis elegant module displays crisp, clear text and images with black e-ink.  Its generous 296 x 128 pixel resolution on a 2.9 inch screen can display a lot of data in a reasonably compact space. Thin, lightweight, and with very low current requirements, it is ideal for small handheld applications as well as fixed installations.\u003c\/p\u003e\n\u003cp\u003eWe have made the ePaper module very easy to use with \u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/epaper-display-blocklyprop\" rel=\"noopener\" target=\"_blank\"\u003eBlocklyProp visual programming\u003c\/a\u003e.  Define text, values, and shapes with a single block.  Or, store several bitmap images on a \u003ca href=\"\/products\/8-gb-microsdhc-card\/\" target=\"_blank\" rel=\"noopener\"\u003emicroSD card\u003c\/a\u003e and call them by filename to display as needed during project run-time.\u003c\/p\u003e\n\u003cp\u003eThis ePaper module can also be used with most any other 3.3 V or 5 V controller that supports an SPI interface.  The voltage supplied to the module also sets its VCCIO, requiring only one supply voltage for all devices on the SPI bus.  Propeller C libraries and example code are available for download in the Parallax Learn folder, and example code for other devices can be found via the manufacturer's website.\u003c\/p\u003e\n\u003cp\u003eAn 8-wire cable is included for connecting your ePaper module to your project. Each wire terminates in a socket; you may wish to purchase a few 3-pin single-row headers with long pins if connecting this module to a breadboard.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlack e-ink is easy to read with no backlight needed.\u003c\/li\u003e\n\u003cli\u003eVery low power consumption is ideal for battery operated devices\u003c\/li\u003e\n\u003cli\u003e8-wire cable with module connector and female 0.1” sockets included\u003c\/li\u003e\n\u003cli\u003eFour mounting holes with screws and threaded standoffs included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGraphical device readouts\u003c\/li\u003e\n\u003cli\u003eProgrammable labels\u003c\/li\u003e\n\u003cli\u003eMultimedia art projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e296 x 128 2.9 inch ePaper Display Key Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V–5V\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI; at current operating voltage\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 89.5mm × 38mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 66.89mm × 29.05mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.138 × 0.138\u003c\/li\u003e\n\u003cli\u003ePixel resolution: 296 × 128\u003c\/li\u003e\n\u003cli\u003eDisplay color: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eFull refresh time: 2s\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW(typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.017mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003cli\u003eScreen dimension diagonal: 2.9” inches (7.36 cm)\u003c\/li\u003e\n\u003cli\u003eCable length: 8.66 inches (22 cm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 32 to +122 °F (0 to +50 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eNOTE:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e For indoor use. Not for use in high temperature or high humidity environments. See the manufacturer's datasheet for details.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/language\/blocklyprop\/epaper-display-blocklyprop\" rel=\"noopener\" target=\"_blank\"\u003eePaper Display with BlocklyProp tutorial \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/ab-blocks\/epaper\" rel=\"nofollow noopener noreferrer\" target=\"_blank\"\u003eBlocklyProp Block Reference for ePaper Display\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/2.9inch_e-Paper_Module\" rel=\"nofollow noopener noreferrer\" target=\"_blank\"\u003eManufacturer’s resource page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220720949,"sku":"28084","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/ca1aae81-28084a.jpg?v=1787781821"},{"product_id":"oled-c-click","title":"OLED C Click","description":"\u003ch5\u003eOLED C Click Overview:\u003c\/h5\u003e\n\u003cp\u003eOLED C click is equipped with the 96x96 high-color OLED display. It can display up to 65K\/262K different colors and shades on a compact size display, based on the OLED technology. The OLED technology provides a very good brightness-to-contrast ratio, doesn’t require any backlight - since the pixel elements emit light on their own, better angle of viewing - compared to traditional TFT screens, better power consumption, better picture quality, better response times and more. The OLED technology is constantly being perfected and it is slowly taking over the existing liquid crystal technology (TFT).\u003c\/p\u003e\n\u003cp\u003eThe compact size of the display and the used OLED technology make this Click board™ a perfect solution for many applications which require the display of some information on the screen, in a form of a diagram, text or a pie chart. The Click board™ can be used to display images or any kind of graphics in 96x96 pixels resolution, with 65K\/262K colors. It is a perfect solution to add display functionality to small development systems.\u003c\/p\u003e\n\u003ch5\u003eOLED C Click Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOLED part number: PSP27801\u003c\/li\u003e\n\u003cli\u003eController: SSD1351\u003c\/li\u003e\n\u003cli\u003eDisplay color: 65,536\/262,144\u003c\/li\u003e\n\u003cli\u003eSize\/Resolution: 96x96 pix\u003c\/li\u003e\n\u003cli\u003eModule size: 25.8 x 48.1 x 1.227mm (type)\u003c\/li\u003e\n\u003cli\u003eActive area: 20.135 x 20.14 mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.07 x 0.21mm\u003c\/li\u003e\n\u003cli\u003eDot size: 0.045 x 0.19mm\u003c\/li\u003e\n\u003cli\u003eInterface: 8\/16\/18 bit parallel, 3-wire and 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eWeight: 35g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor datasheet, schematic, and pinout diagram see the \u003ca href=\"https:\/\/www.mikroe.com\/oled-c-click\" target=\"_blank\" rel=\"noopener\"\u003emanufacturer's product page\u003c\/a\u003e.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397223473461,"sku":"64208","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/9b57020d-64208b.jpg?v=1787781829"},{"product_id":"p2-eval-led-matrix-add-on-board","title":"P2 Eval LED Matrix Add-on Board","description":"\u003ch5\u003eP2 Eval LED Matrix Add-on Board Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 Eval LED Matrix Add-on Board board features an 8 x 7 grid of Charlieplexed green LEDs. Your Propeller 2 multicore microcontroller projects may use this board to display text of graphics across 56 LEDs using only 8 I\/O pins.\u003c\/p\u003e\n\u003cp\u003eCharlieplexing allows for control of more LEDs with fewer I\/O pins by taking advantage of the one-way current flow properties of diodes (including Light Emitting Diodes), along with the tri-state properties of the Propeller 2 I\/O pins.\u003c\/p\u003e\n\u003cp\u003eTo light multiple LEDs, rely on the fast operating speed of the Propeller 2. While Charlieplexing doesn’t actually light the LEDs simultaneously, it switches them on and off fast enough to trick the human eye into believing they are on simultaneously.\u003c\/p\u003e\n\u003cp\u003eWhen Propeller 2 code switches each LED on and off at least 50 times a second (50 Hz), flickering should not be noticeable and the LEDs will appear to be permanently on. (For the Propeller 2 this switching speed is no problem as each I\/O could switch faster than 180 MHz, which is plenty of time to turn on every LED if needed).\u003c\/p\u003e\n\u003cp\u003eThis board features a pass-through socket that stacks on top of a 2x6 accessory header on the Propeller 2 Evaluation Board (#64000). It is also compatible with a \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e with a \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e installed.\u003c\/p\u003e\n\u003ch5\u003eP2 Eval LED Matrix Add-on Board Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e56 LEDs in a 8x7 grid\u003c\/li\u003e\n\u003cli\u003eOnly required 8 Propeller 2 I\/O pins for full LED control\u003c\/li\u003e\n\u003cli\u003eTotal current consumption 4 mA, thanks to Charlieplexing\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 1.6 x 0.8 in (4.1 x 2 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the Product Guide download for I\/O pin assignments and lookup table showing the I\/O pin states for controlling each LED. Product guide, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/document\/d\/1gn6oaT5Ib7CytvlZHacmrSbVBJsD9t_-kmvjd7nUR6o\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Documentation (Rev B Silicon)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1usUcCCQVp3liAqENX9rvX-XVqJomMREhKYExM_taG0A\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Instructions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller 2 Repository for community example code contributions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forums.parallax.com\/discussion\/169367\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP2-ES Eval Board support thread\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224980789,"sku":"64006C","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/8b29c3e2-64006c2.jpg?v=1787781833"},{"product_id":"max7219-8-digit-7-segment-digital-led-display","title":"MAX7219 8-Digit 7-Segment Digital LED Display","description":"\u003ch5\u003eMAX7219 8-Digit 7-Segment Digital LED Display Overview:\u003c\/h5\u003e\n\u003cp\u003eThis 8-digit red LED numeric display is driven by the MAX7219, using an SPI interface requiring three I\/Os. The MAX7219 is an integrated serial input\/output common-cathode driver, between the LEDs and the microcontroller. Only one external register is used to set the current of each LED segment.\u003c\/p\u003e\n\u003cp\u003eThis device was added to Parallax inventory as a quick demonstration to the sample code for the Propeller 2 SPIN\/PASM SPI Driver used in the Propeller 2 Live Forum. It is compatible with all Parallax microcontrollers, to provide simple visual feedback for numbers and data.\u003c\/p\u003e\n\u003ch5\u003eMAX7219 8-Digit 7-Segment Digital LED Display Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 3.3V and 5V microcontrollers\u003c\/li\u003e\n\u003cli\u003eMeasures 0.375” x 3.250” in size with 0.36” tall displays.\u003c\/li\u003e\n\u003cli\u003e150 mA low-power shutdown mode\u003c\/li\u003e\n\u003cli\u003eIncludes 5-pin straight and right-angle headers for soldering by customer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMAX7219 8-Digit 7-Segment Digital LED Display Wiring instructions:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVcc: 5VDC\u003c\/li\u003e\n\u003cli\u003eGND: GND\u003c\/li\u003e\n\u003cli\u003eDIN: P0\u003c\/li\u003e\n\u003cli\u003eCS: P1\u003c\/li\u003e\n\u003cli\u003eCLK: P2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p2\/All\/jm_ez_max7219\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eEZ MAX7219 Driver in Propeller 2 Object Exchange (GitHub)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225177397,"sku":"26972","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/bff13dcf-26972a.jpg?v=1787781833"},{"product_id":"16x2-i2c-lcd-display-module-with-blue-backlight","title":"16x2 I2C LCD Display Module with Blue Backlight","description":"\u003ch5\u003e16x2 I2C LCD Display Module with BLUE Backlight Overview:\u003c\/h5\u003e\n\u003cp\u003eThis 2x16 character LCD Module with BLUE Backlight uses an I2C interface to communicate with the host microcontroller. This budget-conscious LCD is used on projects requiring the display of text, data, or ASCII characters of all types. Connect to Vcc, Gnd, SDA (serial data line), and SCL (serial clock line). This is a 5VDC device and will be found on the I2C bus at address 0x27 \/ 0x3F.\u003c\/p\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Blue Backlight Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlue backlit display with two rows of 16 characters\u003c\/li\u003e\n\u003cli\u003ePotentiometer on back to adjust display brightness and contrast\u003c\/li\u003e\n\u003cli\u003eI2C protocol only requires two I\/O pins (SDA and SCL) for control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Also available with a \u003ca href=\"\/products\/16x2-i2c-lcd-display-module-with-yellow-backlight\/\" target=\"_blank\" rel=\"noopener\"\u003eYELLOW backlight (#26971)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Blue Backlight Applications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eShow control information (on, off, elapsed time), temperature, time, or numbers\/special characters\u003c\/li\u003e\n\u003cli\u003eAccess all custom characters stored in ROM\u003c\/li\u003e\n\u003cli\u003eDebugging for microcontroller projects\u003c\/li\u003e\n\u003cli\u003eUseful in dark and bright environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Blue Backlight Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay capacity: 16 character x 2 row\u003c\/li\u003e\n\u003cli\u003eDisplay color: Blue backlit\u003c\/li\u003e\n\u003cli\u003eCharacter size: 2.95 mm wide x 4.35 mm high\u003c\/li\u003e\n\u003cli\u003eCharacter pixels: 5 W x 7 H\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: 5 VDC +\/- 0.5V\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: 2 mA @ 5 VDC\u003c\/li\u003e\n\u003cli\u003eConnection: 4-pin male header with 0.1\": spacing\u003c\/li\u003e\n\u003cli\u003eCommunication: I2C\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 3.15 x 1.42 x 0.51 in (80 x 36 x 13 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 32 to +131 °F (0 to +55 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p2\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller 2 Object Exchange (GitHub)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225079093,"sku":"26970","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e4e029b0-26970a.jpg?v=1787781833"},{"product_id":"16x2-i2c-lcd-display-module-with-yellow-backlight","title":"16x2 I2C LCD Display Module with Yellow Backlight","description":"\u003ch5\u003e16x2 I2C LCD Display Module with Yellow Backlight Overview:\u003c\/h5\u003e\n\u003cp\u003eThis 2x16 character LCD Module with YELLOW Backlight uses an I2C interface to communicate with the host microcontroller. This budget-conscious LCD is used on projects requiring the display of text, data, or ASCII characters of all types. Connect to Vcc, Gnd, SDA (serial data line), and SCL (serial clock line). This is a 5VDC device and will be found on the I2C bus at address 0x27 \/ 0x3F.\u003c\/p\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Yellow Backlight Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eYellow backlit display with two rows of 16 characters\u003c\/li\u003e\n\u003cli\u003ePotentiometer on back to adjust display brightness and contrast\u003c\/li\u003e\n\u003cli\u003eI2C protocol only requires two I\/O pins (SDA and SCL) for control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Also available with a \u003ca href=\"\/products\/16x2-i2c-lcd-display-module-with-blue-backlight\/\" target=\"_blank\" rel=\"noopener\"\u003eBLUE backlight (#26970)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Yellow Backlight Applications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eShow control information (on, off, elapsed time), temperature, time, or numbers\/special characters\u003c\/li\u003e\n\u003cli\u003eAccess all custom characters stored in ROM\u003c\/li\u003e\n\u003cli\u003eDebugging for microcontroller projects\u003c\/li\u003e\n\u003cli\u003eUseful in dark and bright environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e16x2 I2C LCD Display Module with Yellow Backlight Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay capacity: 16 character x 2 row\u003c\/li\u003e\n\u003cli\u003eDisplay color: Yellow backlit\u003c\/li\u003e\n\u003cli\u003eCharacter size: 2.95 mm wide x 4.35 mm high\u003c\/li\u003e\n\u003cli\u003eCharacter pixels: 5 W x 7 H\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: 5 VDC +\/- 0.5V\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: 2 mA @ 5 VDC\u003c\/li\u003e\n\u003cli\u003eConnection: 4-pin male header with 0.1\": spacing\u003c\/li\u003e\n\u003cli\u003eCommunication: I2C\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 3.15 x 1.42 x 0.51 in (80 x 36 x 13 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 32 to +131 °F (0 to +55 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\/tree\/master\/libraries\/community\/p2\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller 2 Object Exchange (GitHub)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225275701,"sku":"26971","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a711a782-26971a.jpg?v=1787781836"},{"product_id":"eink-click","title":"eINK Click","description":"\u003ch5\u003eeINK Click Overview:\u003c\/h5\u003e\n\u003cp\u003eeINK Click is an adapter Click board™ used to interface a compatible eINK display with a host controller, such as the Propeller 2. The most distinctive feature of the eINK displays is their very low power consumption and the ability to retain the information, even after disconnecting from the power source. The power is consumed only when the display content is changing. The Click board™ comes shipped with the 172x72 eINK display, driven by the integrated SSD1606 controller and it can display 4 shades: black, dark gray, light gray and white. The same type of display is used on the popular Kindle E-readers.\u003c\/p\u003e\n\u003cp\u003eParallax speeds the process of Propeller 2 development through our partnership with MikroE, who has created a family of 850+ Clicks for most I\/O functions you may envision. Connect your Click boards to the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e with a \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e, using the \u003ca href=\"\/products\/p2-to-mikrobus-click-adapter\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 to MikroBus Click Adapter (#64008)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSpecifically, the eINK Click is supported by the \u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\" target=\"_blank\" rel=\"noopener\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe eINK displays use I2C or SPI communication protocol for the communication with the host controller. These displays features inherently wide viewing angle and high contrast, as well as good readability in daylight conditions. The click board™ itself carries the supporting electronics, used to provide all the necessary voltages for the proper operation of the eINK display. The display driver pins are routed through the flat cable of the display and connected via the 24pin, 0.5mm ZIF connector on the click board. From there, the command and data lines are routed to the appropriate pins on the mikroBUS™ of the eINK click.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Displays not included, sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eeINK Click Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVery low power consumption for portable and wearable applications\u003c\/li\u003e\n\u003cli\u003eOn-board LM75 thermal sensor for thermal compensation of the display\u003c\/li\u003e\n\u003cli\u003eCompatible with E-Paper Displays for eINK Click modules, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eeINK Click Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: GPIO, I2C, SPI\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3.3 VDC\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 2.86 x 2.54 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.mikroe.com\/eink-click-without-display\" rel=\"noopener\" target=\"_blank\"\u003eManufacturer’s resource page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225832757,"sku":"64223","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/5ab172c8-64223a.jpg?v=1787781837"},{"product_id":"200-x-200-1-54-inch-e-paper-display-for-eink-click","title":"200 x 200 1.54 inch E-Paper Display for eINK Click","description":"\u003ch5\u003e200 x 200 1.54 inch E-Paper Display Overview:\u003c\/h5\u003e\n\u003cp\u003eThe E-Paper 1.54\" display is based on Active Matrix Electrophoretic Display (AMEPD) technology and has an integrated pixel driver. The display itself has 24-pin flat printed cable, used to connect to the \u003ca href=\"\/products\/eink-click\/\" rel=\"noopener\" target=\"_blank\"\u003eeINK Click board\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eParallax speeds the process of Propeller 2 development through our partnership with MikroE, who has created a family of 850+ Clicks for most I\/O functions you may envision. Connect your Click boards to the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e with a \u003ca href=\"\/products\/p2-edge-module\/\"\u003eP2 Edg\u003c\/a\u003e\u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003ee\u003c\/a\u003e\u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003e Module (#P2-EC)\u003c\/a\u003e, using the \u003ca href=\"\/products\/p2-to-mikrobus-click-adapter\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 to MikroBus Click Adapter (#64008)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSpecifically, the eINK Click is supported by the \u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe E-Paper 1.54\" display has resolution of 200(V) X 200(H) pixels and an active display area of 27.6 X 27.6. The size of its square shaped pixels is 0.138mm x 0.138mm. The screen displays clear and crisp graphics, and has an ultra-wide viewing range, thanks to the technology used. Another key feature of the E-Ink technology is the extremely low power consumption, even when the display actively refreshes its content.\u003c\/p\u003e\n\u003ch5\u003e200 x 200 1.54 inch E-Paper Display Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay size: 1.54\"\u003c\/li\u003e\n\u003cli\u003eResolution: 200 x 200 (183 dpi)\u003c\/li\u003e\n\u003cli\u003ePixel Pitch: 0.138 x 0.138 mm\u003c\/li\u003e\n\u003cli\u003eActive display area: 27.6 x 27.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mikroe.com\/e-paper-display-154-200x200-dots\/\" rel=\"noopener\" target=\"_blank\"\u003eManufacturer’s resource page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eP2 Quick Byte E-Ink Display Demo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225865525,"sku":"64224","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/59f245e5-64224a.jpg?v=1787781841"},{"product_id":"296-x-128-2-9-inch-e-paper-display-for-eink-click","title":"296 x 128 2.9 inch E-Paper Display for eINK Click","description":"\u003ch5\u003e296 x 128 2.9 inch E-Paper Display Overview:\u003c\/h5\u003e\n\u003cp\u003eThe E-Paper 2.9\" display is based on Active Matrix Electrophoretic Display (AMEPD) technology and has an integrated pixel driver. The display itself has 24-pin flat printed cable, used to connect to the \u003ca href=\"\/products\/eink-click\/\" rel=\"noopener\" target=\"_blank\"\u003eeINK Click board\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eParallax speeds the process of Propeller 2 development through our partnership with MikroE, who has created a family of 850+ Clicks for most I\/O functions you may envision. Connect your Click boards to the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e with a \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e, using the \u003ca href=\"\/products\/p2-to-mikrobus-click-adapter\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 to MikroBus Click Adapter (#64008)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSpecifically, the eINK Click is supported by the \u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e.  See the \u003ca href=\"https:\/\/www.parallax.com\/e-ink-display-demo\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Quick Byte E-Ink Display Demo\u003c\/a\u003e for a useful useful utility example as a starting point.\u003c\/p\u003e\n\u003cp\u003eThe E-Paper 2.9\" display has resolution of 128(V) X 296(H) pixels and an active display area of 29.05 X 66.89. The size of its square shaped pixels is 0.226 X 0.227 mm. The screen displays clear and crisp graphics, and has an ultra-wide viewing range, thanks to the technology used. Another key feature of the E-Ink technology is the extremely low power consumption, even when the display actively refreshes its content.\u003c\/p\u003e\n\u003ch5\u003e296 x 128 2.9 inch E-Paper Display Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay size: 2.9\"\u003c\/li\u003e\n\u003cli\u003eResolution: 128 x 296 (112 dpi)\u003c\/li\u003e\n\u003cli\u003ePixel Pitch: 0.226 x 0.227 mm\u003c\/li\u003e\n\u003cli\u003eActive display area: 29.05 x 66.89 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mikroe.com\/e-paper-display-29-inches\" rel=\"noopener\" target=\"_blank\"\u003eManufacturer’s resource page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eP2 Quick Byte E-Ink Display Demo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225898293,"sku":"64226","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/59793a0f-64226a.jpg?v=1787781841"},{"product_id":"122-x-250-2-13-inch-e-paper-display-for-eink-click","title":"122 x 250 2.13 inch E-Paper Display for eINK Click","description":"\u003ch5\u003e122 x 250 2.13 inch E-Paper Display Overview:\u003c\/h5\u003e\n\u003cp\u003eThe E-Paper 2.13\" display is based on Active Matrix Electrophoretic Display (AMEPD) technology and has an integrated pixel driver. The display itself has 24-pin flat printed cable, used to connect to the \u003ca href=\"\/products\/eink-click\/\" rel=\"noopener\" target=\"_blank\"\u003eeINK Click board\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eParallax speeds the process of Propeller 2 development through our partnership with MikroE, who has created a family of 850+ Clicks for most I\/O functions you may envision. Connect your Click boards to the  \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Mini Breakout Board (#64019)\u003c\/a\u003e with a \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e, using the \u003ca href=\"\/products\/p2-to-mikrobus-click-adapter\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 to MikroBus Click Adapter (#64008)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSpecifically, the eINK Click is supported by the \u003ca href=\"https:\/\/github.com\/ironsheep\/P2-Click-eInk\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 driver for Mikroe eINK Click by Stephen Moraco\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe E-Paper 2.13\" display has resolution of 122(V) X 250(H) pixels and an active display area of 23.71 X 48.55. The size of its square shaped pixels is 0.194mm x 0.194mm. The screen displays clear and crisp graphics, and has an ultra-wide viewing range, thanks to the technology used. Another key feature of the E-Ink technology is the extremely low power consumption, even when the display actively refreshes its content.\u003c\/p\u003e\n\u003ch5\u003e122 x 250 2.13 inch E-Paper Display Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay size: 2.13\"\u003c\/li\u003e\n\u003cli\u003eResolution: 122 x 250 (160 dpi)\u003c\/li\u003e\n\u003cli\u003ePixel Pitch: 0.194 x 0.194 mm\u003c\/li\u003e\n\u003cli\u003eActive display area: 23.71 x 48.55 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mikroe.com\/e-paper-display-213-122x250-dots\/\" rel=\"noopener\" target=\"_blank\"\u003eManufacturer’s resource page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225996597,"sku":"64225","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/509b98e7-64225a.jpg?v=1787781841"}],"url":"https:\/\/shop.parallax.com\/collections\/displays-indicators.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}