{"title":"Cables \u0026 Adapters","description":null,"products":[{"product_id":"prop-plug-rev-e","title":"Prop Plug Rev E","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Prop Plug provides a USB-to-serial port connection that is convenient for microcontroller programming and communication. This tiny device is capable of asynchronous communication at up to a 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller 1, Propeller 2, and BASIC Stamp microcontrollers. The Prop Plug slips onto a 4-pin, 0.1\" spaced header, allowing both printed circuit boards and breadboards to provide in-circuit programming capability.\u003c\/p\u003e\n\u003ch5\u003eProp Plug Revision Notice:\u003c\/h5\u003e\n\u003cp\u003eUnits shipped starting 1\/28\/2021 are Rev E.  This latest revision of Prop Plug adds pin labeling to both sides of the board, uses 2-sided LEDs which are visible from both sides of the board, and introduces buffered inputs and outputs to improve isolation between the Prop Plug and target board when either is powered down.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eProp Plug Key Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB to serial port conversion\u003c\/li\u003e\n\u003cli\u003eCapable of asynchronous communication up to 3 M baud\u003c\/li\u003e\n\u003cli\u003eCustomer-configurable reset behavior options — new for Rev E\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3 and 5 V microcontrollers\u003c\/li\u003e\n\u003cli\u003eConnects to a 4-pin, 0.1\" spaced header\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/usb-a-to-micro-b-cable\/\" target=\"_blank\" rel=\"noopener\"\u003eUSB A to micro B cable required, not included\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePower Requirements: Powered by USB port (5 VDC)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCurrent requirements: ~15 mA (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB Communication Interface: USB 2.0 Full Speed\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUART Communication Interface: True 3.3V CMOS drive output and TTL input\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eBuffered RX input compatible with 3.3V and 5V signals, tolerant to 5.5V\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eTX and RX activity LEDs, visible from either side of the board\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCommunication Speed: Asynchronous serial, 300 baud to 3 Mbps data rates\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eReset pulse width: ~20 µs (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eConnection: USB microB; 4-pin female SIP socket with 0.1\" spacing\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePCB Dimensions: 0.93 in x 0.48 in (23.5 mm x 12.1 mm)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDimensions with connectors: ~1.3 in x 0.48 in (33 mm x 12.1 mm)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eUSB2SER Replacement\u003c\/h5\u003e\n\u003cp\u003eThis product may be used in place of the discontinued USB2SER Development Tool (#28024).  The two products differ only in pin order; we suggest adapting the Prop Plug pin order with \u003ca href=\"\/products\/100mm-jumper-wires-mf-40-piece-ribbon\/\" target=\"_blank\" rel=\"noopener\"\u003e100mm Jumper Wires, MF 40-piece Ribbon (#800-00063).\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397214331189,"sku":"32201","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/6a9024eb-32201RevEa.jpg?v=1787781806"},{"product_id":"basic-stamp-1-serial-adapter","title":"BASIC Stamp 1 Serial Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eBASIC Stamp 1 Serial Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe BASIC Stamp 1 Serial Adapter provides serial port based programming capability from a computer running Windows to a BASIC Stamp 1. The BASIC Stamp 1 microcontroller has been around since the early 1990s and was designed to be programmed from a parallel port on a DOS-based PC. Since then, PC technology has evolved greatly so the BASIC Stamp 1 Serial Adapter was designed to program the BASIC Stamp 1 via a PC's serial port using the Windows-based BASIC Stamp Editor.  One end plugs into a serial cable and the other onto a 3-pin header provided on BASIC Stamp 1 development boards.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEasy interface between serial ports and the BASIC Stamp 1\u003c\/li\u003e\n\u003cli\u003eSupported by the BASIC Stamp Editor (Windows)\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca href=\"\/products\/parallax-usb-to-serial-rs-232-adapter\/\" target=\"_blank\" rel=\"noopener\"\u003eParallax USB to Serial (RS-232) Adapter (#28030)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProvides downloading and debugging capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eBASIC Stamp 1 Serial Adapter Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eMale DB9 to male 3-pin header adapter\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: Powered by PC serial port (RS-232 powered)\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: n\/a\u003c\/li\u003e\n\u003cli\u003eCommunication: RS-232C to TTL\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.65 x 0.70 x 0.4 in (4.19 x 1.78 x 1.02 cm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e BASIC Stamp 1 debugging operates in a single direction only (BS1 to PC).  Additionally, the BASIC Stamp 1 Serial Adapter cannot be used to transmit and receive serial data via the BASIC Stamp's SERIN\/SEROUT commands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397214724405,"sku":"27111","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/424cb306-27111.png?v=1787781806"},{"product_id":"battery-holder-5-aa-barrel-jack","title":"Battery Holder 5-AA Barrel Jack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eBattery Holder 5-AA Barrel Jack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis battery holder accepts five 1.2 or 1.5 volt AA cells. It is designed to mount inside our rectangular brushed-aluminum chassis used with the ActivityBot, Boe-Bot, and Shield- Bot robot kits. It can also provide a portable power supply for any of our development boards that use a 2.1 mm center-positive barrel jack.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eBattery Holder 5-AA Barrel Jack Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds 5 AA cell batteries\u003c\/li\u003e\n\u003cli\u003e2.1 mm center-positive barrel plug\u003c\/li\u003e\n\u003cli\u003eSecure with two 4-40 flathead screws\u003c\/li\u003e\n\u003cli\u003eCord length: ~10 in (~25 cm)\u003c\/li\u003e\n\u003cli\u003eCase dimensions: 3.12 x 2.31 x 0.67 in (8 x 5.7 x 1.7 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216297269,"sku":"753-00007","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/cc21af19-753-00007.png?v=1787781810"},{"product_id":"scribbler-s3-lipo-battery","title":"Scribbler S3 LiPo Battery","description":"\u003ch5 role=\"tab\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan class=\"rotforte\"\u003e\u003cstrong\u003eQuantity limited to stock on hand.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\r\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003eScribbler S3 LiPo Battery Overview:\u003c\/h5\u003e\r\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\r\n\u003cdiv class=\"field-body\"\u003e\r\n\r\nThe Scribbler S3 LiPo battery is included with the Scribbler S3 robot. It is offered here individually as a replacement item.\r\n\u003cul\u003e\r\n \t\u003cli\u003e3.7 V, 4000 mAh Lithium polymer battery\u003c\/li\u003e\r\n \t\u003cli\u003eFits inside Scribbler S3 robot battery compartment\u003c\/li\u003e\r\n \t\u003cli\u003ePre-attached JST connector fits with power cord in S3 battery compartment\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nBattery information and charging instructions are included in the Scribbler S3 Info Poster, under Downloads below. Read and follow all directions, and do not recharge it in any other charger.\r\n\r\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eSHIPPING: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan class=\"rotforte\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eLithium batteries are shipped via UPS only. Only valid for domestic, US shipment by UPS Ground. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397217214773,"sku":"752-28333","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/48b6a508-752-28333.png?v=1787781813"},{"product_id":"powerpal-selectable-voltage-3-amp-breadboard-power-supply","title":"PowerPal Selectable Voltage 3-Amp Breadboard Power Supply","description":"\u003cp\u003e\u003cspan style=\"color: #ff4000\"\u003e\u003cstrong\u003eThis product is retiring; quantity limited to stock on hand.\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003ePowerPal Selectable Voltage 3-Amp Breadboard Power Supply Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe PowerPal is a high-current power supply with a selectable voltage output for your breadboard projects. It's perfect with the \u003ca href=\"\/products\/propeller-flip-microcontroller-module\/\" target=\"_blank\" rel=\"noopener\"\u003eFLiP Multicore Microcontroller\u003c\/a\u003e, where relying on USB power limits your project to a few hundred mA (enough for LEDs and perhaps a sensor or two).  The PowerPal opens up your opportunities to control motors, larger displays and multiple sensors.\u003c\/p\u003e\n\u003cp\u003eThis product carries the core attributes provided by Parallax: Made in the USA, a reliable quality design, and a consistently available supply you can count on for years ahead. Many of our customers have stumbled around with the imported breadboard power supplies, only to find some of them may not work and are not available for subsequent purchase.\u003c\/p\u003e\n\u003cp\u003eFor power input, we suggest a 7.5 V\/1.6A or a 12V\/2A wall-mount power supply for stationary projects.  A 4AA or 5 AA battery pack is ideal for portable projects, or when you want to power the breadboard with 5V and power a servo off of VIN.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRotary switch for user-selectable voltage output choices: 3.3 V, 5 V, 6 V, 7.5 V\u003c\/li\u003e\n\u003cli\u003eVIN access header pins for powering a servo or other device separately\u003c\/li\u003e\n\u003cli\u003e3 Amp continuous load switching power supply with 4 Amp peak surge rating is ideal for servo motors\u003c\/li\u003e\n\u003cli\u003eBarrel Jack or 0.1 inch pitch headers for 5-16 VDC input\u003c\/li\u003e\n\u003cli\u003eThrough-hole pads for optional On\/Off switch leads\u003c\/li\u003e\n\u003cli\u003eGreen power-status LED\u003c\/li\u003e\n\u003cli\u003eOver-current and over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature and short-circuit protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003ePowerPal Selectable Voltage 3-Amp Breadboard Power Supply Specifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage input requirements: +5 to +16  VDC\u003c\/li\u003e\n\u003cli\u003eVoltage output selectable by user: 3.3V, 5V, 6V, or 7.5V\u003c\/li\u003e\n\u003cli\u003eVoltage output tolerance: Typically 2% at a 2A load, 3% at a 4A peak load\u003c\/li\u003e\n\u003cli\u003eCurrent rating: constant load  3 A; absolute peak 4 A\u003c\/li\u003e\n\u003cli\u003eNominal switching frequency: 770 KHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: up to 95%\u003c\/li\u003e\n\u003cli\u003eOperating temperature:  -13 to +185 °F (-25 to +85 °C)\u003c\/li\u003e\n\u003cli\u003eDimensions: PCB 1.5 x 1 inch (39 x 24 mm);  0.1 inch (2.6 mm) mounting hole\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397218853173,"sku":"32133","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/c72d8f2d-32133e.jpg?v=1787781816"},{"product_id":"parallax-usb-to-serial-rs-232-adapter","title":"Parallax USB to Serial (RS-232) Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax USB to Serial (RS-232) adapter provides a Virtual Com Port for devices that have a DB9 (9-pin) serial female socket and need to connect to a computer's USB port. Compact and economical, this adapter utilizes the FTDI FT231X chip.\u003c\/p\u003e\n\u003cp\u003eUpdated FTDI USB drivers for Windows are included in the latest versions of the BASIC Stamp Editor, Propeller Tool, and SX-Key IDE software packages. You may also download the Windows drivers separately from our site, or drivers for other operating systems directly from FTDI (see the Downloads section below).\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Version 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003eConnects to your computer with a USB A to Mini-B cable (not included)\u003c\/li\u003e\n\u003cli\u003eDB9 male socket to connect to your board's serial programming and debugging port\u003c\/li\u003e\n\u003cli\u003eFTDI Drivers are included in most operating systems and Parallax programming software\u003c\/li\u003e\n\u003cli\u003eDrivers for different operating systems are available from FTDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: Regulated 5 V from USB port or powered hub.\u003c\/li\u003e\n\u003cli\u003eCommunication: Full speed USB, full duplex serial from 300 baud to 3 Mbaud\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7 x 1.2 x 0.5 in (51 x 16 x 12 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eEasy to Use:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one of these Parallax programming environments (BASIC Stamp Editor, Propeller Tool, SX-Key IDE).\u003c\/li\u003e\n\u003cli\u003eOr, download the USB drivers separately from the Downloads link\u003c\/li\u003e\n\u003cli\u003eConnect the USB to Serial Adapter to your PC with a USB A to Mini B cable\u003c\/li\u003e\n\u003cli\u003eA message from your system tray will say your hardware is installed and ready to use (Windows)\u003c\/li\u003e\n\u003cli\u003eConnect the adapter to your device's DB9 connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.ftdichip.com\/Drivers\/VCP.htm\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUSB VCP Drivers for other Operating Sysytems\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(FTDI.com)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219017013,"sku":"28030","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/614a1825-28030.png?v=1787781817"},{"product_id":"xbee-usb-adapter-board","title":"XBee USB Adapter Board","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eXBee USB Adapter Board Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis low cost XBee USB Adapter Board comes in a partially assembled kit form and provides a cost-effective solution to interface a computer or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through Digi's X-CTU software.\u003c\/p\u003e\n\u003cp\u003eThis adapter board can provide an easy interface to the XBee or XBee Pro modules by converting the 2 mm pin spacing to breadboard friendly 0.100” spacing. The adapter board also provides a way to connect pluggable wires or solder connections and also provides mounting holes.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProvides an easy interface to configure XBee Modules using Digi's X-CTU software\u003c\/li\u003e\n\u003cli\u003eOnboard 3.3 V, 1 A voltage regulator can support continuous communication with most XBee modules\u003c\/li\u003e\n\u003cli\u003eConverts XBee 2mm pin spacing to 0.100\" pin spacing\u003c\/li\u003e\n\u003cli\u003e4 status indicator LEDs for Power, RSSI, Associate and mode (sleep\/ON)\u003c\/li\u003e\n\u003cli\u003eProvides easy pluggable wire or solder connections\u003c\/li\u003e\n\u003cli\u003eIncludes mounting holes\u003c\/li\u003e\n\u003cli\u003ePin-out compatible with our other XBee Adapter boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eKey Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage requirements: 5.0V from USB or VDD pin, 3.3V generated on-board\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: Varies with XBee Model\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial pass-through to XBee module\/USB to Host PC\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 1.5 x 1.0 in (38.1 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -40 to +158°F (-40 to +70°C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eXBee USB Adapter Board Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 - XBee Adapter Board PCB\u003c\/li\u003e\n\u003cli\u003e2 - 10-pin 2mm sockets, pre-installed\u003c\/li\u003e\n\u003cli\u003e1 - 40-pin SIP header (#451-04001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNotes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe FAN2500S33X regulator used on Rev A of this adapter is rated at 100 mA continuous, 300 mA peak current. The regular XBee modules (802.15.4 and ZB) draw less than 55 mA, but XBee Pro modules can draw over 200 mA when in a continuous-transmit state. While this adapter board can supply enough current for the intermittent transmissions of XBee Pro modules typical to many common uses, applications requiring continuous, sustained transmissions from XBee Pro modules would be better suited to the \u003ca href=\"\/products\/xbee-sip-adapter\/\"\u003eXBee SIP Adapter (#32402)\u003c\/a\u003e, or the \u003ca href=\"\/products\/xbee-adapter-board\/\"\u003eXBee Adapter Board (#32403)\u003c\/a\u003e with an external regulator (not included).\u003c\/li\u003e\n\u003cli\u003eSoldering assembly required. Tools Required: Soldering Iron, Solder, Flux, Diagonal Cutters or Hobby Knife and Saftey Glasses.\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/usb-a-to-mini-b-cable\/\"\u003eUSB A to mini B\u003c\/a\u003e cable is needed to connect this product to a computer with a USB 2.0 compatible port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219115317,"sku":"32400","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e0dbac8f-32400.png?v=1787781817"},{"product_id":"parallax-usb-to-serial-rs-232-adapter-with-cable","title":"Parallax USB to Serial (RS-232) Adapter with Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter with Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax USB to Serial (RS-232) adapter provides a Virtual Com Port for devices that have a DB9 (9-pin) serial female socket and need to connect to a computer's USB port. Compact and economical, this adapter utilizes the FTDI FT231X chip.\u003c\/p\u003e\n\u003cp\u003eUpdated FTDI USB drivers for Windows are included in the latest versions of the BASIC Stamp Editor and Propeller Tool software packages. You may also download the Windows drivers separately from our site, or drivers for other operating systems directly from FTDI (see the Downloads section below).\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Version 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003eConnects to your computer with a USB A to Mini-B cable (not included)\u003c\/li\u003e\n\u003cli\u003eDB9 male socket to connect to your board's serial programming and debugging port\u003c\/li\u003e\n\u003cli\u003eFTDI Drivers are included in most operating systems and Parallax programming software\u003c\/li\u003e\n\u003cli\u003eDrivers for different operating systems are available from FTDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: Regulated 5 V from USB port or powered hub.\u003c\/li\u003e\n\u003cli\u003eCommunication: Full speed USB, full duplex serial from 300 baud to 3 Mbaud\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7 x 1.2 x 0.5 in (51 x 16 x 12 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eEasy to Use:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one of these Parallax programming environments (BASIC Stamp Editor, Propeller Tool).\u003c\/li\u003e\n\u003cli\u003eOr, download the USB drivers separately from the Downloads link\u003c\/li\u003e\n\u003cli\u003eConnect the USB to Serial Adapter to your PC with a USB A to Mini B cable\u003c\/li\u003e\n\u003cli\u003eA message from your system tray will say your hardware is installed and ready to use (Windows)\u003c\/li\u003e\n\u003cli\u003eConnect the adapter to your device's DB9 connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ftdichip.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUSB VCP Drivers for other Operating Sysytems\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220262197,"sku":"28031","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a57405b3-28031.png?v=1787781817"},{"product_id":"usb-a-to-mini-b-cable","title":"USB A to Mini B Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB A to Mini B Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis cable connects your computer's USB A port to a USB Mini B-type device. It is compatible with a wide range of Parallax development boards, including the Propeller FLiP, Propeller Activity Board WX, Board of Education USB, and more.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eUSB A to Mini B Cable Key Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eType USB A to Mini B\u003c\/li\u003e\n\u003cli\u003eSupports USB protocol up to 2.0\u003c\/li\u003e\n\u003cli\u003e4 ft (120 cm) length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219213621,"sku":"805-00006","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/97a8a84f-805-00006.png?v=1787781817"},{"product_id":"usb-a-to-b-cable","title":"USB A to B Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB A to B Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis cable connects your computer's USB port to a USB B-type device, such as the \u003ca href=\"\/products\/arduino-uno\/\" target=\"_blank\" rel=\"noopener\"\u003eArduino Uno\u003c\/a\u003e.  It is a useful accessory for the \u003ca href=\"\/products\/robotics-shield-kit-for-arduino\/\" target=\"_blank\" rel=\"noopener\"\u003eRobotics Shield Kit (for Arduino)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eUSB A to B Cable Specifications:\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eType USB A to B\u003c\/li\u003e\n\u003cli\u003eSupports USB Protocol up to 2.0\u003c\/li\u003e\n\u003cli\u003e6 ft (180 cm) length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219180853,"sku":"805-00007","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/b047166d-805-00007.png?v=1787781817"},{"product_id":"usb-a-to-micro-b-cable","title":"USB A to Micro B Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB A to Micro B Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis USB 2.0 cable connects your computer's USB port to any USB Micro B-type device, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emicro:bit module\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prop-plug-rev-e\" target=\"_blank\" rel=\"noopener\"\u003ePropeller Plug (#32201)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219246389,"sku":"805-00016","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/4be2c415-805-00016.png?v=1787781817"},{"product_id":"3-pin-extension-cable-12","title":"3-Pin Extension Cable (12\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Extension Cable (12\") Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable silicone shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many \u003ca href=\"\/collections\/sensors\" target=\"_blank\" rel=\"noopener\"\u003eParallax sensors\u003c\/a\u003e and \u003ca href=\"\/collections\/displays\/\" target=\"_blank\" rel=\"noopener\"\u003eDisplays\u003c\/a\u003e use a 3-pin interface compatible with these cables, making them convenient for positioning these peripherals farther from your microcontroller.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e3-Pin Extension Cable (12\") Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eLength approximately 12 in (30 cm)\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eRoHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003cli\u003e3-pin male\/male header for breadboard use sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219311925,"sku":"800-00120","price":1.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a9c2b19f-800-00120.png?v=1787781816"},{"product_id":"assorted-3-wire-extension-cable-30-pack","title":"Assorted 3-Wire Extension Cable 30-Pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eAssorted 3-Wire Extension Cable 30-Pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eUnsure just how long you need that 3-wire extension cable to be? Worry no more with this 30-pack of cables of varying length. Also included are an assortment of male\/male headers should you need to transform your female\/female wires into male\/female or male\/male wires.\u003c\/p\u003e\n\u003cp\u003eThese 22-gauge, three-conductor wire cables are covered with a pliable silicone shielding of a much higher quality than common extension cables. The female sockets are conveniently compatible with all 3-pin Parallax sensors, and many Parallax boards also support these cables with 3-pin ground-power-signal ports.  Whether you are flying an ELEV-8 quadcopter or mounting your PING))) Ultrasonic Distance Sensor away from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAssorted 3-Wire Extension Cable 30-Pack Key Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single-row connector for power, ground, and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/Female terminators\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAssorted 3-Wire Extension Cable 30-Pack Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(3)  - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-4\/\" rel=\"noopener\" target=\"_blank\"\u003e4\" wire (#800-00040)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3)  - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-6\/\" rel=\"noopener\" target=\"_blank\"\u003e6\" wire (#800-00060)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(10) - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-8\/\" target=\"_blank\" rel=\"noopener\"\u003e8\" wire (#800-00080)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5)  - \u003ca href=\"\/products\/3-pin-extension-cable-12\/\" target=\"_blank\" rel=\"noopener\"\u003e12\" wire (#800-00120)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)  - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-16\/\" target=\"_blank\" rel=\"noopener\"\u003e16\" wire (#800-00160)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)  - 20\" wire (#800-00200)\u003c\/li\u003e\n\u003cli\u003e(3)  - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-24\/\" target=\"_blank\" rel=\"noopener\"\u003e24\" wire (#800-00240)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)  - \u003ca href=\"\/products\/3-pin-signal-power-ground-cable-extension-36\/\" target=\"_blank\" rel=\"noopener\"\u003e36\" wire (#800-00360)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(12) - \u003ca href=\"\/products\/3-pin-single-row-header-long\/\" target=\"_blank\" rel=\"noopener\"\u003e3-Pin header (451-00303)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)  - \u003ca href=\"\/products\/40-pin-single-row-header\" target=\"_blank\" rel=\"noopener\"\u003e1x40 SIP header (#451-04001)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219377461,"sku":"751-00010","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/dba88fb5-751-00010.png?v=1787781817"},{"product_id":"3-pin-signal-power-ground-cable-extension-16","title":"3-Pin Signal-Power-Ground Cable Extension (16\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many Parallax sensors also use a 3-pin interface compatible with these cables. Whether you are adding a servo to your project or extending your Ping))) Ultrasonic Distance sensor far from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eROHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDetails:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:  4 x 0.30 x 0.10 in. (10.16 x 0.77 x 0.27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAlso available in the following sizes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (4\") (800-00040)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (6\") (800-00060)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (8\") (800-00080)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (12\") (800-00120)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (20\") (800-00200)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (24\") (800-00240)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (36\")  (800-00360)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e 3-pin male\/male header for breadboard use sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219442997,"sku":"800-00160","price":2.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/221a39b7-800-00160.png?v=1787781820"},{"product_id":"3-pin-signal-power-ground-cable-extension-24","title":"3-Pin Signal-Power-Ground Cable Extension (24\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many Parallax sensors also use a 3-pin interface compatible with these cables. Whether you are adding a servo to your project or extending your Ping))) Ultrasonic Distance sensor far from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e3-Pin Signal-Power-Ground Cable Key Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eROHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:  4 x 0.30 x 0.10 in. (10.16 x 0.77 x 0.27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAlso available in the following sizes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (4\") (800-00040)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (6\") (800-00060)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (8\") (800-00080)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (12\") (800-00120)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (16\") (800-00160)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (20\") (800-00200)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (36\") (800-00360)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e 3-pin male\/male header for breadboard use sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219541301,"sku":"800-00240","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/1f5544c8-800-00240.png?v=1787781821"},{"product_id":"alligator-clip-test-lead-10-pack","title":"Alligator Clip Test Lead 10-pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eAlligator Clip Test Lead 10-pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 10-pack of alligator clip test leads will come in handy for developing your microcontroller projects, and for many other low-voltage, low-current tasks around your workshop. They are suitable replacements for the ones included in the \u003ca href=\"\/products\/whats-a-microcontroller-with-python-and-micro-bit-complete-kit\/\" target=\"_blank\" rel=\"noopener\"\u003eWhat's a Microcontroller with Python and micro:bit - Complete Kit\u003c\/a\u003e\u003ca href=\"\/products\/whats-a-microcontroller-with-python-and-microbit\/\" rel=\"noopener\" target=\"_blank\"\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenerous 18-inch (45.7 cm), 24 AWG wire leads\u003c\/li\u003e\n\u003cli\u003eOverall length of 21 inches (53.3 cm)\u003c\/li\u003e\n\u003cli\u003eInsulated alligator clips on both ends\u003c\/li\u003e\n\u003cli\u003eFlexible insulation with a nice hand\u003c\/li\u003e\n\u003cli\u003eBundled in packs of 10, two each of five colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220884789,"sku":"800-00042","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/54caf5ed-800-00042.png?v=1787781821"},{"product_id":"3-pin-signal-power-ground-cable-extension-8","title":"3-Pin Signal-Power-Ground Cable Extension (8\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many Parallax sensors also use a 3-pin interface compatible with these cables. Whether you are adding a servo to your project or extending your Ping))) Ultrasonic Distance sensor far from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eROHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDetails:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:  4 x 0.30 x 0.10 in. (10.16 x 0.77 x 0.27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAlso available in the following sizes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (4\") (800-00040)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (6\") (800-00060)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (12\") (800-00120)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (16\") (800-00160)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (20\") (800-00200)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (24\") (800-00240)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (36\") (800-00360)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e 3-pin male\/male header for breadboard use sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219574069,"sku":"800-00080","price":1.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/3d13a4ea-800-00080.png?v=1787781821"},{"product_id":"3-pin-signal-power-ground-cable-extension-6","title":"3-Pin Signal-Power-Ground Cable Extension (6\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many Parallax sensors also use a 3-pin interface compatible with these cables. Whether you are adding a servo to your project or extending your Ping))) Ultrasonic Distance sensor far from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eROHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDetails:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:  4 x 0.30 x 0.10 in. (10.16 x 0.77 x 0.27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAlso available in the following sizes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (4\") (800-00040)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (8\") (800-00080)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (12\") (\u003cspan\u003e800-00120\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (16\") (\u003cspan\u003e800-00160\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (20\") (\u003cspan\u003e800-00200\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (24\") (\u003cspan\u003e800-00240\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (36\") (\u003cspan\u003e800-00360\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e 3-pin male\/male header for breadboard use sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219803445,"sku":"800-00060","price":1.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/8b3566be-800-00060.png?v=1787781821"},{"product_id":"3-pin-signal-power-ground-cable-extension-36","title":"3-Pin Signal-Power-Ground Cable Extension (36\")","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 22-gauge three-conductor wire is covered with a pliable shielding and the tactile feeling conveys a much higher confidence than common extension cables. Parallax boards support these cables with 3-pin male headers. Many Parallax sensors also use a 3-pin interface compatible with these cables. Whether you are adding a servo to your project or extending your Ping))) Ultrasonic Distance sensor far from your microcontroller, these cables are the best choice.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003e3-Pin Signal-Power-Ground Cable Key Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e22 AWG 3-conductor silicone-shielded cable\u003c\/li\u003e\n\u003cli\u003e0.1\" spacing single row connector for power, ground and signal\u003c\/li\u003e\n\u003cli\u003eFemale\/female terminations\u003c\/li\u003e\n\u003cli\u003eUses Molex series 70058 #16-02-0087 terminal or equivalent and Molex #50-57-9003 housing or equivalent\u003c\/li\u003e\n\u003cli\u003eROHS compliant\u003c\/li\u003e\n\u003cli\u003eBlack-Red-White pliable coated wires with a tactile feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e3-Pin Signal-Power-Ground Cable Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003e800-00360Dimensions:  4 x 0.30 x 0.10 in. (10.16 x 0.77 x 0.27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eAlso available in the following sizes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (4\") (800-00040)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (6\") (800-00060)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (8\") (800-00080)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (12\") (800-00120)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (16\") (800-00160)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (20\") (800-00200)\u003c\/li\u003e\n\u003cli\u003e3-pin Signal-Power-Ground Cable Extension (24\") (800-00240)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e 3-pin male\/male header for breadboard use sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219934517,"sku":"800-00360","price":4.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d8b62745-800-00360.png?v=1787781821"},{"product_id":"7-5-vdc-1-6-amp-power-supply","title":"7.5 VDC 1.6 Amp Power Supply","description":"\u003cp class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eNeed a stable, plug-in power supply for your microcontroller development board? 7.5 VDC 1.6 Amp Power Supply is an AC to DC adaptor that will convert your 120 VAC power to a regulated 7.5 DC voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.6 Amp regulated current output\u003c\/li\u003e\n\u003cli\u003e2.1mm, center-positive barrel jack fits most Parallax Education development boards\u003c\/li\u003e\n\u003cli\u003eAccepts 100 to 240 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the Manufacturer's Datasheet under Downloads for complete specifications.\u003c\/p\u003e\n\u003cp\u003eNote: This power supply's rating has been upgraded over time, from1 A and 1.4 A in prior years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397222228277,"sku":"750-00009","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d021e2c3-750-00009.png?v=1787781825"},{"product_id":"4-aa-battery-holder","title":"4-AA Battery Holder","description":"\u003cp class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003e\u003cstrong\u003e4-AA Battery Holder Overview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis battery pack is a replacement part for our \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" target=\"_blank\" rel=\"noopener\"\u003eBASIC Stamp Boe-Bot\u003c\/a\u003e (up to Rev D Board of Education) and SumoBot WX robots. It aligns with the mounting slots in the \u003ca href=\"\/products\/small-robot-chassis\/\" target=\"_blank\" rel=\"noopener\"\u003eSmall Robot Chassis\u003c\/a\u003e , and SumoBot Chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-AA Battery Holder Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds four AA batteries\u003c\/li\u003e\n\u003cli\u003e5mm outer diameter, 2mm inner diameter center-positive plug\u003c\/li\u003e\n\u003cli\u003eMounting holes fit Parallax Small Robot \u0026amp; SumoBot chassis holes\u003c\/li\u003e\n\u003cli\u003eUse Nylon #4-40 mounting hardware, not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397222326581,"sku":"700-00038","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/3fea7c29-700-00038.png?v=1787781825"},{"product_id":"1-2-v-aa-ni-mh-rechargeable-batteries-12-pack","title":"1.2 V AA Ni-MH Rechargeable Batteries, 12-pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e1.2 V AA Ni-MH Rechargeable Batteries, 12-pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eWe chose Tenergy Premium 2500 mAh Ni-MH batteries as an environmentally and economically friendly option to power our ActivityBot 360° and cyber:bot robots.  Used extensively during development of the ActivityBot robot's Feedback 360° servo, these batteries delivered a more consistent performance, and lasted almost as long on a single charge cycle, as alkaline AA batteries.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e12-pack of AA, 1.2 V, 2500 mAh batteries\u003c\/li\u003e\n\u003cli\u003eRechargeable Nickel Metal Hydride formula\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003ca href=\"\/products\/tenergy-12-aa-aaa-fast-battery-charger\/\" rel=\"noopener\" target=\"_blank\"\u003eTenergy 12 AA \/ AAA Fast Battery Charger (#752-00021)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot subject to Lithium ion battery shipping restrictions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eParallax Small Robot Compatibility:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eActivityBot 360° (#32600)\u003c\/a\u003e - highly recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot kit (#32700)\u003c\/a\u003e - highly recommended\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eActivityBot (#32500) - acceptable; but re-calibrate if using 1.5 AA batteries previously\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/boe-bot-robot-kit-usb-serial\/\" rel=\"noopener\" target=\"_blank\"\u003eBoe-Bot Robot (Serial, #28132\u003c\/a\u003e or \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" rel=\"noopener\" target=\"_blank\"\u003eUSB, #28832\u003c\/a\u003e) - Four 1.2 V cells are not adequate, but may be used after switching to a \u003ca href=\"\/products\/battery-holder-5-aa-barrel-jack\" rel=\"noopener\" target=\"_blank\"\u003eBattery Holder 5-AA Barrel Jack (#753-00007)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e The original BASIC Stamp SumoBot (#27402) requires 5 V. Four of these 1.2 cells are not adequate for reliable operation. Our 5-AA battery holder may be mounted under the chassis, but customer modification would be required to remove the barrel plug and strip\/tin the leads.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"rotforte\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003eThe \u003ca href=\"\/products\/robot-shield-with-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot with Arduino Uno (#32335)\u003c\/a\u003e requires 7.5 VDC. Five of these1.2 V cells are not adequate for reliable operation\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eAA Ni-MH Rechargeable Battery Specifications, Per Cell:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eType: AA cell\u003c\/li\u003e\n\u003cli\u003eChemistry: Nickel Metal Hydride\u003c\/li\u003e\n\u003cli\u003eNominal capacity: 2500 mAh\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 1.2 V\u003c\/li\u003e\n\u003cli\u003eWeight: 29 grams\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.5 mm diameter x 50.5 mm length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397222392117,"sku":"752-00022","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/6fb1c7d0-752-00022a.jpg?v=1787781824"},{"product_id":"tenergy-12-aa-aaa-fast-battery-charger","title":"Tenergy 12 AA \/ AAA Fast Battery Charger","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eTenergy 12 AA \/ AAA Fast Battery Charger Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis Tenergy Fast Battery Charger model TN160 can accommodate up to 12 AA or AAA NiMH or NiCD batteries at a time.  It features a blue LCD screen to indicate the status of each charging channel. We chose this charger and Tenergy Premium 2500 mAh Ni-MH batteries and an environmentally and economically friendly combination to power our ActivityBot 360° robots.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccepts one to twelve AA or AAA Ni-MH or NiCD rechargeable batteries\u003c\/li\u003e\n\u003cli\u003eBuild-in IC and advanced negative Delta-V charging control function\u003c\/li\u003e\n\u003cli\u003eOverheat, over-current protection, short-circuit protection\u003c\/li\u003e\n\u003cli\u003eDetection of non-rechargeable and defective batteries\u003c\/li\u003e\n\u003cli\u003eLCD indicator for individual charging status\u003c\/li\u003e\n\u003cli\u003eRefresh function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eTenergy 12 AA \/ AAA Fast Battery Charger Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter input: 100-240V AC\u003c\/li\u003e\n\u003cli\u003eAdapter output: 12V DC 1500 mA\u003c\/li\u003e\n\u003cli\u003eCharger input: 12V DC 1500 mA\u003c\/li\u003e\n\u003cli\u003eCharger output: AA: DC 1.2V 500 mAh x 12\u003c\/li\u003e\n\u003cli\u003eCharger output AAA: DC 1.2 V DC  250 mAh x12\u003c\/li\u003e\n\u003cli\u003eDischarge current: 250 mAh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"rotforte\"\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003eRead and follow the enclosed manufacturer's instruction manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397222424885,"sku":"752-00021","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d3e405f8-752-00021.jpg?v=1787781824"},{"product_id":"12-volt-2-amp-power-supply","title":"12 Volt 2 Amp Power Supply","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e12 Volt 2 Amp Power Supply Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis wall-mount power supply provides up to 2 amps for your projects and development boards that accept a 12 VDC input and sport a 2.1 mm center-positive jack, including these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/powerpal-selectable-voltage-3-amp-breadboard-power-supply\/\" rel=\"noopener\" target=\"_blank\"\u003ePowerPal Selectable Voltage 3-Amp Breadboard Power Supply\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/propeller-activity-board-wx\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller Activity Board WX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/board-of-education-development-board-usb\/\" rel=\"noopener\" target=\"_blank\"\u003eBoard of Education Development Board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/board-of-education-shield-for-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eBoard of Education Shield (for Arduino)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/cyber-bot-board-for-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003ecyber:bot board for micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e12 Volt 2 Amp Power Supply Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 12 VDC, regulated\u003c\/li\u003e\n\u003cli\u003eCurrent: 2 amps\u003c\/li\u003e\n\u003cli\u003eWall plug: NEMA (North America)\u003c\/li\u003e\n\u003cli\u003eBarrel plug: 2.1 mm inner diameter, 5.5 mm outer diameter, center-positive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"rotforte\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003ePower supply models may vary from model shown based on stock availability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397222588725,"sku":"750-00003","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/2517f6b8-750-00003.png?v=1787781825"},{"product_id":"xbee-sip-adapter","title":"XBee SIP Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003eXBee SIP Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe XBee SIP Adapter is a fully-assembled, small-footprint solution for interfacing the most commonly-used XBee module features with your 3.3 V or 5 V microcontroller.\u003c\/p\u003e\n\u003cp\u003eThe 2 x 5 dual SIP header makes a sturdy connection to your breadboard or through-hole board, and brings the basic connections to your prototyping area without taking up a lot of space. The more advanced XBee features are still accessible, through additional headers on the module.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard 3.3 V regulator\u003c\/li\u003e\n\u003cli\u003e5V to 3.3 V logic translator buffers common I\/O pins\u003c\/li\u003e\n\u003cli\u003eSix status indicator LEDs for Power, Tx, Rx, RSSI, Associate and mode (Sleep\/ON)\u003c\/li\u003e\n\u003cli\u003eSmall footprint dual SIP header provides support and allows easy interfacing to DOUT (TX), DIN (RX), RTS, 5 V supply and ground\u003c\/li\u003e\n\u003cli\u003e5-pin female header connections provides interfacing to other XBee pins such as sleep, reset and associate\u003c\/li\u003e\n\u003cli\u003eA row of 10 plated through-holes with 0.1” spacing allows the option of soldering jumper wires or a header (not included) for access to the remaining XBee pins in advanced applications\u003c\/li\u003e\n\u003cli\u003eAn additional plated through-hole gives access to 3.3 V output for ADC reference (VREF) when required\u003c\/li\u003e\n\u003cli\u003eAdapter board is pre-assembled - no soldering required for using most common XBee features\u003c\/li\u003e\n\u003cli\u003eCompatible with all Parallax microcontrollers, including the 5 V BASIC Stamp modules and 3.3 V Propeller P8X32A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e This SIP Adapter is compatible with XBee and XBee Pro modules.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eXBee SIP Adapter Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: 5 VDC\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial pass-through to XBee module\u003c\/li\u003e\n\u003cli\u003eDimensions: 1 x 2.4 x 0.36 in (25.4 x 61 x 9.14 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -40 to + 158 °F (-40 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eOther XBee Adapter Boards:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/xbee-usb-adapter-board\/\"\u003eXBee USB Adapter Board (#32400)\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397223178549,"sku":"32402","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/ad8ae95a-32402.png?v=1787781825"},{"product_id":"edge-i-o-adapter-compatible-with-bbc-micro-bit","title":"Edge I\/O Adapter compatible with BBC micro:bit","description":"\u003cp\u003e\u003cstrong\u003eEdge I\/O Adapter compatible with BBC micro:bit Overview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a BBC micro:bit module to a breadboard with the Parallax Edge I\/O Adapter, moving students from the alligator clip connections into a more useful prototyping space used in higher education. While many breadboard adapters exist for the micro:bit, they frequently have one key shortcoming that we have addressed in our design related to power supply management. The micro:bit only provides 90 mA of current when powered directly from the battery pack, useful for a single micro servo. In our design, the micro:bit battery pack connects directly to the Edge I\/O adapter to power both the micro:bit and breadboard accessories directly (with as much current as the batteries can provide). This is particularly important when using multiple motors, LEDs and sensors.\u003c\/p\u003e\n\u003cp\u003eThis compact board breaks out all of the micro:bit I\/O pins in sequential order, and includes power connections for the two most common types of breadboards. It is fully compatible with micro:bit version 1.5 and micro:bit version 2 modules.\u003c\/p\u003e\n\u003cp\u003eParallax has designed this board and is developing curriculum support in partnership with \u003ca href=\"https:\/\/cyber.org\/\" rel=\"noopener\" target=\"_blank\"\u003eCYBER.ORG\u003c\/a\u003e, the academic initiative of the Cyber Innovation Center.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e80-way card edge connector, compatible with the BBC micro:bit module\u003c\/li\u003e\n\u003cli\u003eDual 2-pin, 0.1” headers connect power and ground to the breadboard's power rails\u003c\/li\u003e\n\u003cli\u003e20-way 0.1” header connects every micro:bit I\/O to the breadboard, along with a a 3 V reference\u003c\/li\u003e\n\u003cli\u003eJST socket for connecting of the micro:bit standard battery pack\u003c\/li\u003e\n\u003cli\u003ePass-through power from the Edge I\/O Adapter JST socket to the micro:bit power input with reverse polarity and dual voltage source protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cstrong\u003eEdge I\/O Adapter \u003c\/strong\u003eBoard Revision Notice:\u003c\/h5\u003e\n\u003cp\u003eThe (+) and (-) power rail header pin positions have been swapped between Rev A (blue modules) and Rev B \u0026amp; C (black modules). Check your module's pin labeling.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Application Ideas:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLearning circuit-building and programming.\u003c\/li\u003e\n\u003cli\u003eBuilding projects\u003c\/li\u003e\n\u003cli\u003eDesigning prototype circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Key Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eForm factor: 80-pin, 1.27 mm card edge socket and male header pins with 0.1\" pin spacing\u003c\/li\u003e\n\u003cli\u003eGPIO: All 19 micro:bit I\/O pins accessible\u003c\/li\u003e\n\u003cli\u003ePower Input: 3 V via a 2-pin 2 mm JST-PH connector, or 3 to 3.3 V power source from the breadboard\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -4 to +185 °F (-20 to +85 °C)\u003c\/li\u003e\n\u003cli\u003eDimensions including edge connector: 1.49 x 2.28 in (37.8 x 58 mm)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/series\/whats-microcontroller-python-and-microbit\" rel=\"noopener\" target=\"_blank\"\u003eWhat’s a Microcontroller with Python and micro:bit (Learn site tutorials)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.youtube.com\/playlist?list=PLt_MJJ1F_EXabtX1Je1nkRCQW0TU3p0D0\" rel=\"noopener\" target=\"_blank\"\u003ePython and micro:bit curriculum preview (YouTube)\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397223276853,"sku":"32710","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/4c18b9e0-32710-Rev-Cc.jpg?v=1787781824"},{"product_id":"p2-to-mikrobus-click-adapter","title":"P2 to MikroBUS Click Adapter","description":"\u003ch5\u003eP2 to MikroBUS Click Adapter Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 to MikroBUS Click Adapter connects MicroE Click series modules to our most popular Propeller 2 development systems for quick multicore prototyping and project design.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the \u003ca href=\"\/products\/p2-edge-module-breadboard\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or P2 \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eEdge Mini Breakout Board (#64019)\u003c\/a\u003e with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eThis fully-assembled adapter plugs directly into two of the P2 board's 2x6 accessory headers to provide a Click-ready socket of 12 signals (with 4 spare I\/Os), 5V, 3V and ground connections.\u003c\/p\u003e\n\u003cp\u003eThe P2 to MikroBUS Click Adapter is affordably priced to encourage application development. Each of the Click boards sold by Parallax includes example Spin2 objects. Nearly 1,000 Click modules are available through Digi-Key, Mouser and RS Components if you don’t find what you need from Parallax.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with MikroE Click modules\u003c\/li\u003e\n\u003cli\u003eLow-insertion force adapter provides quick and reliable connection to P2 development systems\u003c\/li\u003e\n\u003cli\u003eShips completely assembled by Parallax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 to MikroBUS Click Adapter Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB dimensions: 1.9 x 1.7 in (48.26 x 43.18 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.parallax.com\/educator\/propeller-resources\/\" target=\"_blank\" rel=\"noopener\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224030517,"sku":"64008","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/9110a065-64008c.jpg?v=1787781829"},{"product_id":"p2-wx-adapter-add-on-board","title":"P2 WX Adapter Add-on Board","description":"\u003ch5\u003eP2 WX Adapter Add-on Board Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 WX Adapter add-on board connects a Parallax \u003ca href=\"\/products\/parallax-wx-esp8266-wifi-module-sip\/\" target=\"_blank\" rel=\"noopener\"\u003eWX ESP8266 Wi-Fi Module SIP version (#32420S)\u003c\/a\u003e to our most popular Propeller 2 development systems for wireless programming and communication. Wireless programming is available via the drag-and-drop P2 Loader on the WX ESP8266 Wi-Fi Module SIP web page, using a binary file from any P2 programming language. A Spin2 Object is available for IoT applications on the P2 Object Exchange.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the P2 Eval Board Rev C (#64000), and the P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eNote that when wirelessly programming via the WX module the Prop Plug must be disconnected.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with Parallax WX ESP8266 Wi-Fi Modules SIP version (#32420S)\u003c\/li\u003e\n\u003cli\u003eLow insertion force direct connection for the WX Module to compatible Parallax P2 boards\u003c\/li\u003e\n\u003cli\u003eConnect to P57–P63 RES header for P2 programming, or other 2x6 accessory header for serial-over-WiFi\u003c\/li\u003e\n\u003cli\u003eShips completely assembled and tested by Parallax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Propeller 2 programming for rapid development\u003c\/li\u003e\n\u003cli\u003eMulticore remote telemetry systems\u003c\/li\u003e\n\u003cli\u003eCustom IoT devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 WX Adapter Add-on Board Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHeader\/socket pin spacing: 0.1 in (2.54 mm)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.2 x 1.0 in (30.48 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, schematics, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/educator\/propeller-resources\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/11KquS93woptxTfJMx8J7WY4tSFkeH9Oq\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP2 WiFi Firmware \u0026amp; Sample Binary File\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224227125,"sku":"64007","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/3bd2a2cd-64007a.jpg?v=1787781829"},{"product_id":"p2-edge-80-pin-adapter-kit","title":"P2 Edge 80-pin Adapter Kit","description":"\u003cp\u003e\u003cspan style=\"color: #ff4000;\"\u003e\u003cstrong\u003eThis product is retiring; quantity limited to stock on hand.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eP2 Edge 80-pin Adapter Kit Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 Edge 80-Pin Adapter provides a compact breakout for the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC) \u003c\/a\u003eand \u003ca href=\"\/products\/p2-edge-module-with-32mb-ram\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module with 32MB RAM (#P2-EC32MB)\u003c\/a\u003e, bringing all of the Propeller 2 multicore microcontroller pins to 4 rows of 20-way standard 0.1” pin header pads.\u003c\/p\u003e\n\u003cp\u003eThis adapter is supplied as a kit comprising the PCB, vertical edge socket and four 1x20 0.1” pin headers. The kit ships un-assembled to provide  complete flexibility.\u003c\/p\u003e\n\u003cp\u003eThe top two mounting holes are connected to the top-side copper plane and the two non-connected P2-Edge pads. These holes could be left isolated or connected to a signal or power rail as required.\u003c\/p\u003e\n\u003cp\u003eThe bottom two mounting holes are connected to the bottom-side copper plane and the two 5VDC P2-Edge Module Power Input pads.\u003c\/p\u003e\n\u003cp\u003eThe 20-pin header spacing is suitable for a breadboard. One possible configuration would be to solder the outer header pins downward, and the inner header pins upward. In this way, the adapter may be plugged into a breadboard, and the upward pins would be accessible to jumper wires.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"\/products\/prop-plug-rev-e\/\" rel=\"noopener\" target=\"_blank\"\u003eProp Plug (#32201)\u003c\/a\u003e will be required to program the P2 Edge Module, sold separately.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVertical socket for the Parallax \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC) \u003c\/a\u003eand \u003ca href=\"\/products\/p2-edge-module-with-32mb-ram\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module with 32MB RAM (#P2-EC32MB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB comes unpopulated for complete flexibility\u003c\/li\u003e\n\u003cli\u003eSupplied with four 1x20 0.1” male pin headers\u003c\/li\u003e\n\u003cli\u003eMounting holes at each corner, with two connected to 5VDC IN and two unconnected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003eMounting holes: 2.4mm diameter\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 2.3 x 0.8 in (58.5 x 20.3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 Edge 80-pin Adapter Kit Contents:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) P2 Edge 80-pin Adapter PCB (#300-64018)\u003c\/li\u003e\n\u003cli\u003e(4) 20-pin Headers, 0.1: spacing (#450-00307)\u003c\/li\u003e\n\u003cli\u003e(1) 80-pin Edge Connector Socket - Vertical (#450-00310)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224161589,"sku":"64018","price":6.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/1a4b5548-64018a.jpg?v=1787781833"},{"product_id":"80-pin-edge-connector-socket-straight-through-hole","title":"80-pin Edge Connector Socket, Straight, Through-hole","description":"\u003ch5\u003e80-pin Edge Connector Socket, Straight, Through-hole Overview:\u003c\/h5\u003e\n\u003cp\u003eThis through-hole, 80-way edge socket with 1.27 mm spacing holds the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e in a vertical orientation on a printed circuit board (as used in the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, a right-angle version is also available (\u003ca href=\"\/products\/80-pin-edge-connector-socket-right-angle\/\" rel=\"noopener\" target=\"_blank\"\u003e#450-00308\u003c\/a\u003e) as well as a surface-mount version (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-smt\/\" rel=\"noopener\" target=\"_blank\"\u003e#450-00309\u003c\/a\u003e). The printed circuit board pattern varies between the two connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Straight, Through-hole Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224489269,"sku":"450-00310","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/53433d5a-450-00310c.jpg?v=1787781832"},{"product_id":"usb-mains-adapter-18w-5v-3a","title":"USB Mains Adapter, 18W, 5V, 3A","description":"\u003ch5\u003eUSB Mains Adapter Overview:\u003c\/h5\u003e\n\u003cp\u003eThis handy 100-240V input wall charger converts AC to a convenient 5 V supply with up to 3.0 A of current. Use it with the USB A to DC 2.1 mm Jack Cable (#\u003ca href=\"\/products\/usb-a-to-dc-2-1mm-jack-cable\/\" target=\"_blank\" rel=\"noopener\"\u003e805-00019\u003c\/a\u003e) to power your Propeller 2 development system.  Compatible with the P2 Edge Mini Breakout Board (#\u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" target=\"_blank\" rel=\"noopener\"\u003e64019\u003c\/a\u003e) and P2 Edge Module Breadboard (#\u003ca href=\"\/products\/p2-edge-module-breadboard\/\" target=\"_blank\" rel=\"noopener\"\u003e64020\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eThe advantage of this combination is that it eliminates having to carry and store a larger wall plug power supply — use your computer’s USB port or the small 120V to USB 5V 3.0A wall pack.\u003c\/p\u003e\n\u003ch5\u003eUSB Mains Adapter Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e100-240 VAC input and 5 V 3.0 A output\u003c\/li\u003e\n\u003cli\u003eCE \u0026amp; FC Certified\u003c\/li\u003e\n\u003cli\u003eFuse-protective system for over-current protection\u003c\/li\u003e\n\u003cli\u003eWeight: 1.2 oz (34 g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224390965,"sku":"750-00001","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/00c5aa81-750-00001b.jpg?v=1787781833"},{"product_id":"usb-a-to-dc-2-1mm-jack-cable","title":"USB A to DC 2.1mm Jack Cable","description":"\u003ch5\u003eUSB A to DC 2.1mm Jack Cable Overview:\u003c\/h5\u003e\n\u003cp\u003eThis is a custom-made USB to 2.1 mm ID (5.5 mm OD) center positive power cord designed for use with the \u003ca href=\"\/products\/usb-mains-adapter-18w-5v-3a\/\" target=\"_blank\" rel=\"noopener\"\u003eUSB Mains Adapter, 18W, 5V, 3A (#750-00001)\u003c\/a\u003e. Together, these two parts —which are sold separately — provide a reliable 5V, high-current power supply across 18 AWG wire, unlike any cable you will find off the shelf.\u003c\/p\u003e\n\u003cp\u003eThis gauge of wire supports high-current demands of motors when used with our Propeller 2 products. Use this pair with the \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Mini Breakout Board (#64019\u003c\/a\u003e) and \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe advantage of this combination is that it eliminates having to carry and store a larger wall plug power supply — use your computer’s USB port or the small 120V to USB 5V 3.0A wall pack. This is also a fairly flexible, but straight cable — it won’t tangle with different equipment on your desk.\u003c\/p\u003e\n\u003ch5\u003eUSB A to DC 2.1mm Jack Cable Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 3.28 feet (1 meter)\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 AWG copper wire with flexible shielding\u003c\/li\u003e\n\u003cli\u003eConnector types: USB A to 2.1mm center-positive DC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224554805,"sku":"805-00019","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/1cb81f95-805-00019a.jpg?v=1787781833"},{"product_id":"80-pin-edge-connector-socket-right-angle","title":"80-pin Edge Connector Socket, Right-Angle","description":"\u003ch5\u003e80-pin Edge Connector Socket, Right-Angle Overview:\u003c\/h5\u003e\n\u003cp\u003eThis through-hole, 80-way edge socket with 1.27 mm spacing holds the P2 Edge Module (#P2-EC) in a right-angle, parallel to the printed circuit board. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, a vertical version is also available (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-through-hole\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00310\u003c\/a\u003e), as well as a surface-mount version (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-smt\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00309\u003c\/a\u003e). The printed circuit board pattern varies between the two connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Right-Angle Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224620341,"sku":"450-00308","price":2.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/9efe2de2-450-00308d.jpg?v=1787781833"},{"product_id":"80-pin-edge-connector-socket-straight-smt","title":"80-pin Edge Connector Socket, Straight, SMT","description":"\u003ch5\u003e80-pin Edge Connector Socket, Straight, SMT Overview:\u003c\/h5\u003e\n\u003cp\u003eThis surface-mount, 80-way edge socket with 1.27 mm spacing holds the P2 Edge Module (#P2-EC) in a vertical orientation on a printed circuit board. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, vertical through-hole (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-through-hole\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00310\u003c\/a\u003e) and right-angle through-hole (\u003ca href=\"\/products\/80-pin-edge-connector-socket-right-angle\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00308\u003c\/a\u003e) versions are also available. The printed circuit board pattern varies between the various connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Straight, SMT Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224718645,"sku":"450-00309","price":2.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/892107a5-45000309a.jpg?v=1787781833"},{"product_id":"p2-microsd-add-on-board","title":"P2 microSD Add-on Board","description":"\u003cp\u003e\u003cspan style=\"color: #ff4000;\"\u003e\u003cstrong\u003eThis product is retiring; quantity limited to stock on hand.\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eP2 microSD Add-on Board Overview\u003c\/h5\u003e\n\u003cp\u003eThis adapter provides a convenient way to connect a microSD card to the Parallax Propeller P2 microcontroller, and optionally to any other microcontroller or breadboard project.\u003c\/p\u003e\n\u003cp\u003eThe adapter connects a microSD card to any P2 development board with a standard 2x6 way accessory header. Connecting this accessory to any P2 accessory header allows for general data read\/write capabilities (such as data logging or reading program data). Connecting this accessory to the special P2 programming header (IO pins 56-63) would also allow booting from a firmware image stored on the microSD card.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the P2 Eval Board Rev C (#64000), and the P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eThe adapter also has seven 0.1” pitch through-hole pads which provide connection to all of the microSD card signals, and accept a standard vertical or right-angle pin header (not supplied) for connection to other microcontrollers or breadboards, such as for the Parallax FLiP try-it kit.\u003c\/p\u003e\n\u003ch5\u003eP2 microSD Add-on Board Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConnects a microSD card (not included) to the Propeller 2 Accessory Header\u003c\/li\u003e\n\u003cli\u003eAllows booting from a binary firmware file saved on the microSD card when connected to the P2 programming header (IOs 56-63)\u003c\/li\u003e\n\u003cli\u003eConnect to any 2x6 way accessory header for general data reading and writing\u003c\/li\u003e\n\u003cli\u003eUnpopulated pads allow access to all the microSD card power and control signals, handy for attaching logic probes, or connecting the adapter to a breadboard and\/or other microcontroller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 microSD Add-on Board Specifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2x6 female socket with 0.1” spacing compatible with the standard Parallax P2 Accessory sockets\u003c\/li\u003e\n\u003cli\u003eUnpopulated 7-pin SIP through-hole pads with 0.1” spacing for access to the microSD card signals: 3V3, DET, MISO, MOSI, CS, CLK and GND\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 0.8 x 1.05 in (20.32 x 26.67 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, schematics, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/document\/d\/1gn6oaT5Ib7CytvlZHacmrSbVBJsD9t_-kmvjd7nUR6o\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Documentation (Rev B Silicon)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1usUcCCQVp3liAqENX9rvX-XVqJomMREhKYExM_taG0A\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Instructions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller 2 Repository for community example code contributions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forums.parallax.com\/discussion\/169367\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP2-ES Eval Board support thread\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225406773,"sku":"64009","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d4401fe5-64009b.jpg?v=1787781837"},{"product_id":"green-micro-bit-usb-cable","title":"Green micro:bit USB Cable","description":"\u003ch5 role=\"tab\"\u003eGreen micro:bit USB Cable Overview\u003c\/h5\u003e\n\u003cp class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eThis USB cable connects your micro:bit module to your computer for programming and terminal communication.\u003c\/p\u003e\n\u003ch5 role=\"tab\"\u003eGreen micro:bit USB Cable Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eColor: green\u003c\/li\u003e\n\u003cli role=\"tab\"\u003eType: USB A to micro B\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eLength: 30 cm (12 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003ch5\u003e\u003ca href=\"https:\/\/learn.parallax.com\/microbit\" rel=\"noopener\" target=\"_blank\"\u003emicro:bit \u0026amp; cyber:bot Python tutorials\u003c\/a\u003e\u003c\/h5\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226717493,"sku":"32722","price":1.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d44cb7d1-4051261-500.webp?v=1787781844"},{"product_id":"black-micro-bit-usb-cable","title":"Black micro:bit USB Cable","description":"\u003ch5\u003eBlack micro:bit USB Cable Overview\u003c\/h5\u003e\n\u003cp\u003eThis USB cable connects your micro:bit module to your computer for programming and terminal communication.\u003c\/p\u003e\n\u003ch5\u003eBlack micro:bit USB Cable Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eType: USB A to micro B\u003c\/li\u003e\n\u003cli\u003eLength: 30 cm (12 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.parallax.com\/microbit\" rel=\"noopener\" target=\"_blank\"\u003emicro:bit \u0026amp; cyber:bot Python tutorials\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226848565,"sku":"32723","price":1.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/65ad97ad-4051262-501.webp?v=1787781844"},{"product_id":"micro-bit-usb-c-cable-black","title":"micro:bit USB-C Cable - Black","description":"\u003ch5\u003emicro:bit USB-C Cable  - Overview\u003c\/h5\u003e\n\u003cp\u003eThis micro:bit to USB-C cable is perfect for micro:bit programming on computers that have only USB-C ports. More convenient than a USB A to C adapter, it is also less likely to be misplaced. As an added bonus, this cable is longer than the one included in the micro:bit GO and CLUB kits.   Whether you need one or enough for a classroom, the price is right.\u003c\/p\u003e\n\u003ch5\u003emicro:bit USB-C Cable Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C plug for connecting to your computer\u003c\/li\u003e\n\u003cli\u003eUSB microB plug for connecting to your micro:bit module\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eLength: 30 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/microbit\" rel=\"noopener\" target=\"_blank\"\u003eFree micro:bit Curriculum from Parallax\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/microbit.org\/\" rel=\"noopener\" target=\"_blank\"\u003eMicro:bit Educational Foundation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397226979637,"sku":"32726","price":2.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/89b8e202-32726c.png?v=1787781845"},{"product_id":"micro-bit-usb-c-cable-green","title":"micro:bit USB-C Cable - Green","description":"\u003ch5\u003emicro:bit USB-C Cable  - Overview\u003c\/h5\u003e\n\u003cp\u003eThis micro:bit to USB-C cable is perfect for micro:bit programming on computers that have only USB-C ports. More convenient than a USB A to C adapter, it is also less likely to be misplaced. As an added bonus, this cable is longer than the one included in the micro:bit GO and CLUB kits.   Whether you need one or enough for a classroom, the price is right.\u003c\/p\u003e\n\u003ch5\u003emicro:bit USB-C Cable Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C plug for connecting to your computer\u003c\/li\u003e\n\u003cli\u003eUSB microB plug for connecting to your micro:bit module\u003c\/li\u003e\n\u003cli\u003eColor: Green\u003c\/li\u003e\n\u003cli\u003eLength: 30 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/microbit\" rel=\"noopener\" target=\"_blank\"\u003eFree micro:bit Curriculum from Parallax\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/microbit.org\/\" rel=\"noopener\" target=\"_blank\"\u003eMicro:bit Educational Foundation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397227241781,"sku":"32727","price":2.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/41899268-32727c.png?v=1787781845"},{"product_id":"usb-c-to-c-cable","title":"USB C to C Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB C to C Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis cable connects your computer's USB C port to a USB C-type device, such as the FLiP Rev B.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eUSB C to C Cable Specifications:\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eType USB C to C\u003c\/li\u003e\n\u003cli\u003eAbout 3 ft length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397227405621,"sku":"805-00021","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e7616a62-805-00021.png?v=1787781845"}],"url":"https:\/\/shop.parallax.com\/collections\/cables-adapters.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}