{"title":"Adapters","description":null,"products":[{"product_id":"prop-plug-rev-e","title":"Prop Plug Rev E","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Prop Plug provides a USB-to-serial port connection that is convenient for microcontroller programming and communication. This tiny device is capable of asynchronous communication at up to a 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller 1, Propeller 2, and BASIC Stamp microcontrollers. The Prop Plug slips onto a 4-pin, 0.1\" spaced header, allowing both printed circuit boards and breadboards to provide in-circuit programming capability.\u003c\/p\u003e\n\u003ch5\u003eProp Plug Revision Notice:\u003c\/h5\u003e\n\u003cp\u003eUnits shipped starting 1\/28\/2021 are Rev E.  This latest revision of Prop Plug adds pin labeling to both sides of the board, uses 2-sided LEDs which are visible from both sides of the board, and introduces buffered inputs and outputs to improve isolation between the Prop Plug and target board when either is powered down.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eProp Plug Key Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB to serial port conversion\u003c\/li\u003e\n\u003cli\u003eCapable of asynchronous communication up to 3 M baud\u003c\/li\u003e\n\u003cli\u003eCustomer-configurable reset behavior options — new for Rev E\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3 and 5 V microcontrollers\u003c\/li\u003e\n\u003cli\u003eConnects to a 4-pin, 0.1\" spaced header\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/usb-a-to-micro-b-cable\/\" target=\"_blank\" rel=\"noopener\"\u003eUSB A to micro B cable required, not included\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eProp Plug Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePower Requirements: Powered by USB port (5 VDC)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCurrent requirements: ~15 mA (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUSB Communication Interface: USB 2.0 Full Speed\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eUART Communication Interface: True 3.3V CMOS drive output and TTL input\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eBuffered RX input compatible with 3.3V and 5V signals, tolerant to 5.5V\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eTX and RX activity LEDs, visible from either side of the board\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eCommunication Speed: Asynchronous serial, 300 baud to 3 Mbps data rates\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eReset pulse width: ~20 µs (typical)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eConnection: USB microB; 4-pin female SIP socket with 0.1\" spacing\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePCB Dimensions: 0.93 in x 0.48 in (23.5 mm x 12.1 mm)\u003c\/li\u003e\n\u003cli class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eDimensions with connectors: ~1.3 in x 0.48 in (33 mm x 12.1 mm)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eUSB2SER Replacement\u003c\/h5\u003e\n\u003cp\u003eThis product may be used in place of the discontinued USB2SER Development Tool (#28024).  The two products differ only in pin order; we suggest adapting the Prop Plug pin order with \u003ca href=\"\/products\/100mm-jumper-wires-mf-40-piece-ribbon\/\" target=\"_blank\" rel=\"noopener\"\u003e100mm Jumper Wires, MF 40-piece Ribbon (#800-00063).\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397214331189,"sku":"32201","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/6a9024eb-32201RevEa.jpg?v=1787781806"},{"product_id":"basic-stamp-1-serial-adapter","title":"BASIC Stamp 1 Serial Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eBASIC Stamp 1 Serial Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe BASIC Stamp 1 Serial Adapter provides serial port based programming capability from a computer running Windows to a BASIC Stamp 1. The BASIC Stamp 1 microcontroller has been around since the early 1990s and was designed to be programmed from a parallel port on a DOS-based PC. Since then, PC technology has evolved greatly so the BASIC Stamp 1 Serial Adapter was designed to program the BASIC Stamp 1 via a PC's serial port using the Windows-based BASIC Stamp Editor.  One end plugs into a serial cable and the other onto a 3-pin header provided on BASIC Stamp 1 development boards.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEasy interface between serial ports and the BASIC Stamp 1\u003c\/li\u003e\n\u003cli\u003eSupported by the BASIC Stamp Editor (Windows)\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca href=\"\/products\/parallax-usb-to-serial-rs-232-adapter\/\" target=\"_blank\" rel=\"noopener\"\u003eParallax USB to Serial (RS-232) Adapter (#28030)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProvides downloading and debugging capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eBASIC Stamp 1 Serial Adapter Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eMale DB9 to male 3-pin header adapter\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: Powered by PC serial port (RS-232 powered)\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: n\/a\u003c\/li\u003e\n\u003cli\u003eCommunication: RS-232C to TTL\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.65 x 0.70 x 0.4 in (4.19 x 1.78 x 1.02 cm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e BASIC Stamp 1 debugging operates in a single direction only (BS1 to PC).  Additionally, the BASIC Stamp 1 Serial Adapter cannot be used to transmit and receive serial data via the BASIC Stamp's SERIN\/SEROUT commands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397214724405,"sku":"27111","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/424cb306-27111.png?v=1787781806"},{"product_id":"parallax-usb-to-serial-rs-232-adapter","title":"Parallax USB to Serial (RS-232) Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax USB to Serial (RS-232) adapter provides a Virtual Com Port for devices that have a DB9 (9-pin) serial female socket and need to connect to a computer's USB port. Compact and economical, this adapter utilizes the FTDI FT231X chip.\u003c\/p\u003e\n\u003cp\u003eUpdated FTDI USB drivers for Windows are included in the latest versions of the BASIC Stamp Editor, Propeller Tool, and SX-Key IDE software packages. You may also download the Windows drivers separately from our site, or drivers for other operating systems directly from FTDI (see the Downloads section below).\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Version 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003eConnects to your computer with a USB A to Mini-B cable (not included)\u003c\/li\u003e\n\u003cli\u003eDB9 male socket to connect to your board's serial programming and debugging port\u003c\/li\u003e\n\u003cli\u003eFTDI Drivers are included in most operating systems and Parallax programming software\u003c\/li\u003e\n\u003cli\u003eDrivers for different operating systems are available from FTDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: Regulated 5 V from USB port or powered hub.\u003c\/li\u003e\n\u003cli\u003eCommunication: Full speed USB, full duplex serial from 300 baud to 3 Mbaud\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7 x 1.2 x 0.5 in (51 x 16 x 12 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eEasy to Use:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one of these Parallax programming environments (BASIC Stamp Editor, Propeller Tool, SX-Key IDE).\u003c\/li\u003e\n\u003cli\u003eOr, download the USB drivers separately from the Downloads link\u003c\/li\u003e\n\u003cli\u003eConnect the USB to Serial Adapter to your PC with a USB A to Mini B cable\u003c\/li\u003e\n\u003cli\u003eA message from your system tray will say your hardware is installed and ready to use (Windows)\u003c\/li\u003e\n\u003cli\u003eConnect the adapter to your device's DB9 connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.ftdichip.com\/Drivers\/VCP.htm\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUSB VCP Drivers for other Operating Sysytems\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(FTDI.com)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219017013,"sku":"28030","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/614a1825-28030.png?v=1787781817"},{"product_id":"xbee-usb-adapter-board","title":"XBee USB Adapter Board","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eXBee USB Adapter Board Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis low cost XBee USB Adapter Board comes in a partially assembled kit form and provides a cost-effective solution to interface a computer or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through Digi's X-CTU software.\u003c\/p\u003e\n\u003cp\u003eThis adapter board can provide an easy interface to the XBee or XBee Pro modules by converting the 2 mm pin spacing to breadboard friendly 0.100” spacing. The adapter board also provides a way to connect pluggable wires or solder connections and also provides mounting holes.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProvides an easy interface to configure XBee Modules using Digi's X-CTU software\u003c\/li\u003e\n\u003cli\u003eOnboard 3.3 V, 1 A voltage regulator can support continuous communication with most XBee modules\u003c\/li\u003e\n\u003cli\u003eConverts XBee 2mm pin spacing to 0.100\" pin spacing\u003c\/li\u003e\n\u003cli\u003e4 status indicator LEDs for Power, RSSI, Associate and mode (sleep\/ON)\u003c\/li\u003e\n\u003cli\u003eProvides easy pluggable wire or solder connections\u003c\/li\u003e\n\u003cli\u003eIncludes mounting holes\u003c\/li\u003e\n\u003cli\u003ePin-out compatible with our other XBee Adapter boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eKey Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage requirements: 5.0V from USB or VDD pin, 3.3V generated on-board\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: Varies with XBee Model\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial pass-through to XBee module\/USB to Host PC\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 1.5 x 1.0 in (38.1 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -40 to +158°F (-40 to +70°C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eXBee USB Adapter Board Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 - XBee Adapter Board PCB\u003c\/li\u003e\n\u003cli\u003e2 - 10-pin 2mm sockets, pre-installed\u003c\/li\u003e\n\u003cli\u003e1 - 40-pin SIP header (#451-04001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNotes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe FAN2500S33X regulator used on Rev A of this adapter is rated at 100 mA continuous, 300 mA peak current. The regular XBee modules (802.15.4 and ZB) draw less than 55 mA, but XBee Pro modules can draw over 200 mA when in a continuous-transmit state. While this adapter board can supply enough current for the intermittent transmissions of XBee Pro modules typical to many common uses, applications requiring continuous, sustained transmissions from XBee Pro modules would be better suited to the \u003ca href=\"\/products\/xbee-sip-adapter\/\"\u003eXBee SIP Adapter (#32402)\u003c\/a\u003e, or the \u003ca href=\"\/products\/xbee-adapter-board\/\"\u003eXBee Adapter Board (#32403)\u003c\/a\u003e with an external regulator (not included).\u003c\/li\u003e\n\u003cli\u003eSoldering assembly required. Tools Required: Soldering Iron, Solder, Flux, Diagonal Cutters or Hobby Knife and Saftey Glasses.\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/usb-a-to-mini-b-cable\/\"\u003eUSB A to mini B\u003c\/a\u003e cable is needed to connect this product to a computer with a USB 2.0 compatible port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397219115317,"sku":"32400","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e0dbac8f-32400.png?v=1787781817"},{"product_id":"parallax-usb-to-serial-rs-232-adapter-with-cable","title":"Parallax USB to Serial (RS-232) Adapter with Cable","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter with Cable Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax USB to Serial (RS-232) adapter provides a Virtual Com Port for devices that have a DB9 (9-pin) serial female socket and need to connect to a computer's USB port. Compact and economical, this adapter utilizes the FTDI FT231X chip.\u003c\/p\u003e\n\u003cp\u003eUpdated FTDI USB drivers for Windows are included in the latest versions of the BASIC Stamp Editor and Propeller Tool software packages. You may also download the Windows drivers separately from our site, or drivers for other operating systems directly from FTDI (see the Downloads section below).\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Version 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003eConnects to your computer with a USB A to Mini-B cable (not included)\u003c\/li\u003e\n\u003cli\u003eDB9 male socket to connect to your board's serial programming and debugging port\u003c\/li\u003e\n\u003cli\u003eFTDI Drivers are included in most operating systems and Parallax programming software\u003c\/li\u003e\n\u003cli\u003eDrivers for different operating systems are available from FTDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax USB to Serial (RS-232) Adapter Key Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: Regulated 5 V from USB port or powered hub.\u003c\/li\u003e\n\u003cli\u003eCommunication: Full speed USB, full duplex serial from 300 baud to 3 Mbaud\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7 x 1.2 x 0.5 in (51 x 16 x 12 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eEasy to Use:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one of these Parallax programming environments (BASIC Stamp Editor, Propeller Tool).\u003c\/li\u003e\n\u003cli\u003eOr, download the USB drivers separately from the Downloads link\u003c\/li\u003e\n\u003cli\u003eConnect the USB to Serial Adapter to your PC with a USB A to Mini B cable\u003c\/li\u003e\n\u003cli\u003eA message from your system tray will say your hardware is installed and ready to use (Windows)\u003c\/li\u003e\n\u003cli\u003eConnect the adapter to your device's DB9 connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ftdichip.com\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUSB VCP Drivers for other Operating Sysytems\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397220262197,"sku":"28031","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a57405b3-28031.png?v=1787781817"},{"product_id":"xbee-sip-adapter","title":"XBee SIP Adapter","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top ui-state-hover\" role=\"tab\"\u003eXBee SIP Adapter Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe XBee SIP Adapter is a fully-assembled, small-footprint solution for interfacing the most commonly-used XBee module features with your 3.3 V or 5 V microcontroller.\u003c\/p\u003e\n\u003cp\u003eThe 2 x 5 dual SIP header makes a sturdy connection to your breadboard or through-hole board, and brings the basic connections to your prototyping area without taking up a lot of space. The more advanced XBee features are still accessible, through additional headers on the module.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard 3.3 V regulator\u003c\/li\u003e\n\u003cli\u003e5V to 3.3 V logic translator buffers common I\/O pins\u003c\/li\u003e\n\u003cli\u003eSix status indicator LEDs for Power, Tx, Rx, RSSI, Associate and mode (Sleep\/ON)\u003c\/li\u003e\n\u003cli\u003eSmall footprint dual SIP header provides support and allows easy interfacing to DOUT (TX), DIN (RX), RTS, 5 V supply and ground\u003c\/li\u003e\n\u003cli\u003e5-pin female header connections provides interfacing to other XBee pins such as sleep, reset and associate\u003c\/li\u003e\n\u003cli\u003eA row of 10 plated through-holes with 0.1” spacing allows the option of soldering jumper wires or a header (not included) for access to the remaining XBee pins in advanced applications\u003c\/li\u003e\n\u003cli\u003eAn additional plated through-hole gives access to 3.3 V output for ADC reference (VREF) when required\u003c\/li\u003e\n\u003cli\u003eAdapter board is pre-assembled - no soldering required for using most common XBee features\u003c\/li\u003e\n\u003cli\u003eCompatible with all Parallax microcontrollers, including the 5 V BASIC Stamp modules and 3.3 V Propeller P8X32A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e This SIP Adapter is compatible with XBee and XBee Pro modules.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003eXBee SIP Adapter Details:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements: 5 VDC\u003c\/li\u003e\n\u003cli\u003eCommunication: Serial pass-through to XBee module\u003c\/li\u003e\n\u003cli\u003eDimensions: 1 x 2.4 x 0.36 in (25.4 x 61 x 9.14 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: -40 to + 158 °F (-40 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eOther XBee Adapter Boards:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/xbee-usb-adapter-board\/\"\u003eXBee USB Adapter Board (#32400)\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397223178549,"sku":"32402","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/ad8ae95a-32402.png?v=1787781825"},{"product_id":"edge-i-o-adapter-compatible-with-bbc-micro-bit","title":"Edge I\/O Adapter compatible with BBC micro:bit","description":"\u003cp\u003e\u003cstrong\u003eEdge I\/O Adapter compatible with BBC micro:bit Overview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a BBC micro:bit module to a breadboard with the Parallax Edge I\/O Adapter, moving students from the alligator clip connections into a more useful prototyping space used in higher education. While many breadboard adapters exist for the micro:bit, they frequently have one key shortcoming that we have addressed in our design related to power supply management. The micro:bit only provides 90 mA of current when powered directly from the battery pack, useful for a single micro servo. In our design, the micro:bit battery pack connects directly to the Edge I\/O adapter to power both the micro:bit and breadboard accessories directly (with as much current as the batteries can provide). This is particularly important when using multiple motors, LEDs and sensors.\u003c\/p\u003e\n\u003cp\u003eThis compact board breaks out all of the micro:bit I\/O pins in sequential order, and includes power connections for the two most common types of breadboards. It is fully compatible with micro:bit version 1.5 and micro:bit version 2 modules.\u003c\/p\u003e\n\u003cp\u003eParallax has designed this board and is developing curriculum support in partnership with \u003ca href=\"https:\/\/cyber.org\/\" rel=\"noopener\" target=\"_blank\"\u003eCYBER.ORG\u003c\/a\u003e, the academic initiative of the Cyber Innovation Center.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e80-way card edge connector, compatible with the BBC micro:bit module\u003c\/li\u003e\n\u003cli\u003eDual 2-pin, 0.1” headers connect power and ground to the breadboard's power rails\u003c\/li\u003e\n\u003cli\u003e20-way 0.1” header connects every micro:bit I\/O to the breadboard, along with a a 3 V reference\u003c\/li\u003e\n\u003cli\u003eJST socket for connecting of the micro:bit standard battery pack\u003c\/li\u003e\n\u003cli\u003ePass-through power from the Edge I\/O Adapter JST socket to the micro:bit power input with reverse polarity and dual voltage source protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cstrong\u003eEdge I\/O Adapter \u003c\/strong\u003eBoard Revision Notice:\u003c\/h5\u003e\n\u003cp\u003eThe (+) and (-) power rail header pin positions have been swapped between Rev A (blue modules) and Rev B \u0026amp; C (black modules). Check your module's pin labeling.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Application Ideas:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLearning circuit-building and programming.\u003c\/li\u003e\n\u003cli\u003eBuilding projects\u003c\/li\u003e\n\u003cli\u003eDesigning prototype circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eEdge I\/O Adapter Key Specifications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eForm factor: 80-pin, 1.27 mm card edge socket and male header pins with 0.1\" pin spacing\u003c\/li\u003e\n\u003cli\u003eGPIO: All 19 micro:bit I\/O pins accessible\u003c\/li\u003e\n\u003cli\u003ePower Input: 3 V via a 2-pin 2 mm JST-PH connector, or 3 to 3.3 V power source from the breadboard\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -4 to +185 °F (-20 to +85 °C)\u003c\/li\u003e\n\u003cli\u003eDimensions including edge connector: 1.49 x 2.28 in (37.8 x 58 mm)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/series\/whats-microcontroller-python-and-microbit\" rel=\"noopener\" target=\"_blank\"\u003eWhat’s a Microcontroller with Python and micro:bit (Learn site tutorials)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.youtube.com\/playlist?list=PLt_MJJ1F_EXabtX1Je1nkRCQW0TU3p0D0\" rel=\"noopener\" target=\"_blank\"\u003ePython and micro:bit curriculum preview (YouTube)\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397223276853,"sku":"32710","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/4c18b9e0-32710-Rev-Cc.jpg?v=1787781824"},{"product_id":"p2-to-mikrobus-click-adapter","title":"P2 to MikroBUS Click Adapter","description":"\u003ch5\u003eP2 to MikroBUS Click Adapter Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 to MikroBUS Click Adapter connects MicroE Click series modules to our most popular Propeller 2 development systems for quick multicore prototyping and project design.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the \u003ca href=\"\/products\/p2-edge-module-breadboard\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e or P2 \u003ca href=\"\/products\/p2-edge-mini-breakout-board\/\" rel=\"noopener\" target=\"_blank\"\u003eEdge Mini Breakout Board (#64019)\u003c\/a\u003e with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eThis fully-assembled adapter plugs directly into two of the P2 board's 2x6 accessory headers to provide a Click-ready socket of 12 signals (with 4 spare I\/Os), 5V, 3V and ground connections.\u003c\/p\u003e\n\u003cp\u003eThe P2 to MikroBUS Click Adapter is affordably priced to encourage application development. Each of the Click boards sold by Parallax includes example Spin2 objects. Nearly 1,000 Click modules are available through Digi-Key, Mouser and RS Components if you don’t find what you need from Parallax.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with MikroE Click modules\u003c\/li\u003e\n\u003cli\u003eLow-insertion force adapter provides quick and reliable connection to P2 development systems\u003c\/li\u003e\n\u003cli\u003eShips completely assembled by Parallax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 to MikroBUS Click Adapter Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003ePCB dimensions: 1.9 x 1.7 in (48.26 x 43.18 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.parallax.com\/educator\/propeller-resources\/\" target=\"_blank\" rel=\"noopener\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224030517,"sku":"64008","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/9110a065-64008c.jpg?v=1787781829"},{"product_id":"p2-wx-adapter-add-on-board","title":"P2 WX Adapter Add-on Board","description":"\u003ch5\u003eP2 WX Adapter Add-on Board Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 WX Adapter add-on board connects a Parallax \u003ca href=\"\/products\/parallax-wx-esp8266-wifi-module-sip\/\" target=\"_blank\" rel=\"noopener\"\u003eWX ESP8266 Wi-Fi Module SIP version (#32420S)\u003c\/a\u003e to our most popular Propeller 2 development systems for wireless programming and communication. Wireless programming is available via the drag-and-drop P2 Loader on the WX ESP8266 Wi-Fi Module SIP web page, using a binary file from any P2 programming language. A Spin2 Object is available for IoT applications on the P2 Object Exchange.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the P2 Eval Board Rev C (#64000), and the P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eNote that when wirelessly programming via the WX module the Prop Plug must be disconnected.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with Parallax WX ESP8266 Wi-Fi Modules SIP version (#32420S)\u003c\/li\u003e\n\u003cli\u003eLow insertion force direct connection for the WX Module to compatible Parallax P2 boards\u003c\/li\u003e\n\u003cli\u003eConnect to P57–P63 RES header for P2 programming, or other 2x6 accessory header for serial-over-WiFi\u003c\/li\u003e\n\u003cli\u003eShips completely assembled and tested by Parallax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Propeller 2 programming for rapid development\u003c\/li\u003e\n\u003cli\u003eMulticore remote telemetry systems\u003c\/li\u003e\n\u003cli\u003eCustom IoT devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 WX Adapter Add-on Board Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHeader\/socket pin spacing: 0.1 in (2.54 mm)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.2 x 1.0 in (30.48 x 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, schematics, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/educator\/propeller-resources\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/11KquS93woptxTfJMx8J7WY4tSFkeH9Oq\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP2 WiFi Firmware \u0026amp; Sample Binary File\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224227125,"sku":"64007","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/3bd2a2cd-64007a.jpg?v=1787781829"},{"product_id":"p2-edge-80-pin-adapter-kit","title":"P2 Edge 80-pin Adapter Kit","description":"\u003cp\u003e\u003cspan style=\"color: #ff4000;\"\u003e\u003cstrong\u003eThis product is retiring; quantity limited to stock on hand.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eP2 Edge 80-pin Adapter Kit Overview:\u003c\/h5\u003e\n\u003cp\u003eThe P2 Edge 80-Pin Adapter provides a compact breakout for the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC) \u003c\/a\u003eand \u003ca href=\"\/products\/p2-edge-module-with-32mb-ram\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module with 32MB RAM (#P2-EC32MB)\u003c\/a\u003e, bringing all of the Propeller 2 multicore microcontroller pins to 4 rows of 20-way standard 0.1” pin header pads.\u003c\/p\u003e\n\u003cp\u003eThis adapter is supplied as a kit comprising the PCB, vertical edge socket and four 1x20 0.1” pin headers. The kit ships un-assembled to provide  complete flexibility.\u003c\/p\u003e\n\u003cp\u003eThe top two mounting holes are connected to the top-side copper plane and the two non-connected P2-Edge pads. These holes could be left isolated or connected to a signal or power rail as required.\u003c\/p\u003e\n\u003cp\u003eThe bottom two mounting holes are connected to the bottom-side copper plane and the two 5VDC P2-Edge Module Power Input pads.\u003c\/p\u003e\n\u003cp\u003eThe 20-pin header spacing is suitable for a breadboard. One possible configuration would be to solder the outer header pins downward, and the inner header pins upward. In this way, the adapter may be plugged into a breadboard, and the upward pins would be accessible to jumper wires.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"\/products\/prop-plug-rev-e\/\" rel=\"noopener\" target=\"_blank\"\u003eProp Plug (#32201)\u003c\/a\u003e will be required to program the P2 Edge Module, sold separately.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVertical socket for the Parallax \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module (#P2-EC) \u003c\/a\u003eand \u003ca href=\"\/products\/p2-edge-module-with-32mb-ram\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module with 32MB RAM (#P2-EC32MB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB comes unpopulated for complete flexibility\u003c\/li\u003e\n\u003cli\u003eSupplied with four 1x20 0.1” male pin headers\u003c\/li\u003e\n\u003cli\u003eMounting holes at each corner, with two connected to 5VDC IN and two unconnected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003cli\u003eMounting holes: 2.4mm diameter\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 2.3 x 0.8 in (58.5 x 20.3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 Edge 80-pin Adapter Kit Contents:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) P2 Edge 80-pin Adapter PCB (#300-64018)\u003c\/li\u003e\n\u003cli\u003e(4) 20-pin Headers, 0.1: spacing (#450-00307)\u003c\/li\u003e\n\u003cli\u003e(1) 80-pin Edge Connector Socket - Vertical (#450-00310)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResource Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/documentation\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller 2 Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224161589,"sku":"64018","price":6.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/1a4b5548-64018a.jpg?v=1787781833"},{"product_id":"80-pin-edge-connector-socket-straight-through-hole","title":"80-pin Edge Connector Socket, Straight, Through-hole","description":"\u003ch5\u003e80-pin Edge Connector Socket, Straight, Through-hole Overview:\u003c\/h5\u003e\n\u003cp\u003eThis through-hole, 80-way edge socket with 1.27 mm spacing holds the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module (#P2-EC)\u003c\/a\u003e in a vertical orientation on a printed circuit board (as used in the \u003ca href=\"\/products\/p2-edge-module-breadboard\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module Breadboard (#64020)\u003c\/a\u003e. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, a right-angle version is also available (\u003ca href=\"\/products\/80-pin-edge-connector-socket-right-angle\/\" rel=\"noopener\" target=\"_blank\"\u003e#450-00308\u003c\/a\u003e) as well as a surface-mount version (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-smt\/\" rel=\"noopener\" target=\"_blank\"\u003e#450-00309\u003c\/a\u003e). The printed circuit board pattern varies between the two connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" rel=\"noopener\" target=\"_blank\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Straight, Through-hole Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224489269,"sku":"450-00310","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/53433d5a-450-00310c.jpg?v=1787781832"},{"product_id":"80-pin-edge-connector-socket-right-angle","title":"80-pin Edge Connector Socket, Right-Angle","description":"\u003ch5\u003e80-pin Edge Connector Socket, Right-Angle Overview:\u003c\/h5\u003e\n\u003cp\u003eThis through-hole, 80-way edge socket with 1.27 mm spacing holds the P2 Edge Module (#P2-EC) in a right-angle, parallel to the printed circuit board. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, a vertical version is also available (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-through-hole\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00310\u003c\/a\u003e), as well as a surface-mount version (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-smt\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00309\u003c\/a\u003e). The printed circuit board pattern varies between the two connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Right-Angle Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224620341,"sku":"450-00308","price":2.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/9efe2de2-450-00308d.jpg?v=1787781833"},{"product_id":"80-pin-edge-connector-socket-straight-smt","title":"80-pin Edge Connector Socket, Straight, SMT","description":"\u003ch5\u003e80-pin Edge Connector Socket, Straight, SMT Overview:\u003c\/h5\u003e\n\u003cp\u003eThis surface-mount, 80-way edge socket with 1.27 mm spacing holds the P2 Edge Module (#P2-EC) in a vertical orientation on a printed circuit board. This is a low-insertion-force connector which securely holds the P2 Edge Module in place. Alternatively, vertical through-hole (\u003ca href=\"\/products\/80-pin-edge-connector-socket-straight-through-hole\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00310\u003c\/a\u003e) and right-angle through-hole (\u003ca href=\"\/products\/80-pin-edge-connector-socket-right-angle\/\" target=\"_blank\" rel=\"noopener\"\u003e#450-00308\u003c\/a\u003e) versions are also available. The printed circuit board pattern varies between the various connectors but the socket springs and spacing for the P2 Edge Module are identical.\u003c\/p\u003e\n\u003ch5\u003eFeatures:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure project mounting for the \u003ca href=\"\/products\/p2-edge-module\/\" target=\"_blank\" rel=\"noopener\"\u003eP2 Edge Module\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-cost, quality design for volume applications\u003c\/li\u003e\n\u003cli\u003eSocket the P2 Edge Module to allow a lower-cost 2-layer printed circuit board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplication:\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduction component for mass manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e80-pin Edge Connector Socket, Straight, SMT Specifications:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 1 Amp\u003c\/li\u003e\n\u003cli\u003eVoltage rating: 250V AC RMS\u003c\/li\u003e\n\u003cli\u003eDielectric withstanding voltage: 500V AC RMS 60 Hz for one minute\u003c\/li\u003e\n\u003cli\u003eContact resistance: 30 milli-ohms max at 1 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 1000 Mega-ohms min. At 500V DC\u003c\/li\u003e\n\u003cli\u003eTemperature range: -55C to +85C\u003c\/li\u003e\n\u003cli\u003eContact: brass, gold flash on contact area, tin plated on solder tails, over nickel\u003c\/li\u003e\n\u003cli\u003eRoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397224718645,"sku":"450-00309","price":2.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/892107a5-45000309a.jpg?v=1787781833"},{"product_id":"p2-microsd-add-on-board","title":"P2 microSD Add-on Board","description":"\u003cp\u003e\u003cspan style=\"color: #ff4000;\"\u003e\u003cstrong\u003eThis product is retiring; quantity limited to stock on hand.\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eP2 microSD Add-on Board Overview\u003c\/h5\u003e\n\u003cp\u003eThis adapter provides a convenient way to connect a microSD card to the Parallax Propeller P2 microcontroller, and optionally to any other microcontroller or breadboard project.\u003c\/p\u003e\n\u003cp\u003eThe adapter connects a microSD card to any P2 development board with a standard 2x6 way accessory header. Connecting this accessory to any P2 accessory header allows for general data read\/write capabilities (such as data logging or reading program data). Connecting this accessory to the special P2 programming header (IO pins 56-63) would also allow booting from a firmware image stored on the microSD card.\u003c\/p\u003e\n\u003cp\u003eCompatible development systems include the P2 Eval Board Rev C (#64000), and the P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC).\u003c\/p\u003e\n\u003cp\u003eThe adapter also has seven 0.1” pitch through-hole pads which provide connection to all of the microSD card signals, and accept a standard vertical or right-angle pin header (not supplied) for connection to other microcontrollers or breadboards, such as for the Parallax FLiP try-it kit.\u003c\/p\u003e\n\u003ch5\u003eP2 microSD Add-on Board Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConnects a microSD card (not included) to the Propeller 2 Accessory Header\u003c\/li\u003e\n\u003cli\u003eAllows booting from a binary firmware file saved on the microSD card when connected to the P2 programming header (IOs 56-63)\u003c\/li\u003e\n\u003cli\u003eConnect to any 2x6 way accessory header for general data reading and writing\u003c\/li\u003e\n\u003cli\u003eUnpopulated pads allow access to all the microSD card power and control signals, handy for attaching logic probes, or connecting the adapter to a breadboard and\/or other microcontroller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eP2 microSD Add-on Board Specifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2x6 female socket with 0.1” spacing compatible with the standard Parallax P2 Accessory sockets\u003c\/li\u003e\n\u003cli\u003eUnpopulated 7-pin SIP through-hole pads with 0.1” spacing for access to the microSD card signals: 3V3, DET, MISO, MOSI, CS, CLK and GND\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 0.8 x 1.05 in (20.32 x 26.67 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +185 °F (-40 to +85 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct guide, schematics, RoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003cp\u003ePCBs assembled, tested, and completed in the USA.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/document\/d\/1gn6oaT5Ib7CytvlZHacmrSbVBJsD9t_-kmvjd7nUR6o\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Documentation (Rev B Silicon)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1usUcCCQVp3liAqENX9rvX-XVqJomMREhKYExM_taG0A\/edit?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eParallax Propeller 2 Instructions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/parallaxinc\/propeller\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller 2 Repository for community example code contributions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forums.parallax.com\/discussion\/169367\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP2-ES Eval Board support thread\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225406773,"sku":"64009","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/d4401fe5-64009b.jpg?v=1787781837"}],"url":"https:\/\/shop.parallax.com\/collections\/adapters.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}